The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
StpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds. DURABLE
Parsed from file Compaq-Fp100.mib.txt
Company: compaq
Module: COMPAQ-FastPipes100-MIB
fp100StpBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of StpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. DURABLE" REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8" ::= { fp100StpBridgeEntry 13 }
Vendor: Compaq
Module: COMPAQ-FastPipes100-MIB (Compaq-Fp100.mib)
Type: TABULAR
Access: read-write
Syntax: Timeout
(
600..4000 )
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.1 | fp100StpBridgeIndex | 0 | 0 | Bridge group number. This index only exists if switch interfaces are allocated to this bridge group. |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.2 | fp100StpProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.3 | fp100StpPriority | 0 | 0 | The value of the writeable portion of the Bridge ID, i.e., the first two octets of the 8 octet long Bridge ID. The last 6 octets … |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.4 | fp100StpTimeSinceTopologyChange | 0 | 0 | The time, in hundredths of a seconds, since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.5 | fp100StpTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.6 | fp100StpDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.7 | fp100StpRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.8 | fp100StpRootPort | 0 | 0 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.9 | fp100StpMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.10 | fp100StpHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.11 | fp100StpHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.12 | fp100StpForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.14 | fp100StpBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.232.101.2.1.12.3.1.1.15 | fp100StpBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the… |