If enabled(1), then the FastPipes100 unit will adjust its speed to that specified
when the modem answers the incoming connection. If the modem is configured
by either fp100ModemInitString or the DIP switches on the modem for variable
speed connection rates, this object should be set to enabled(1). If
disabled(2), then no adjustment is made for baud rate differences. The
disabled(2) choice is for modems that do not support variable connection
rates between the modem and the FastPipes100 unit or modems that have been
configured for fixed serial port rates via the fp100ModemInitString object.
DURABLE.
Parsed from file Compaq-Fp100.mib.txt
Company: compaq
Module: COMPAQ-FastPipes100-MIB
fp100ModemAutoNegotiateState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled(1), then the FastPipes100 unit will adjust its speed to that specified when the modem answers the incoming connection. If the modem is configured by either fp100ModemInitString or the DIP switches on the modem for variable speed connection rates, this object should be set to enabled(1). If disabled(2), then no adjustment is made for baud rate differences. The disabled(2) choice is for modems that do not support variable connection rates between the modem and the FastPipes100 unit or modems that have been configured for fixed serial port rates via the fp100ModemInitString object. DURABLE." ::= { fp100ModuleInfo 20 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.2.1.3.20.0 | fp100ModemAutoNegotiateState | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.2.1.3.1 | fp100ModuleDescr | 1 | 1 | A text description of the unit. |
| 1.3.6.1.4.1.232.101.2.1.3.2 | fp100BaseModuleType | 1 | 1 | The type of unit. |
| 1.3.6.1.4.1.232.101.2.1.3.3 | fp100BaseHwVersion | 1 | 1 | The hardware revision for the unit. |
| 1.3.6.1.4.1.232.101.2.1.3.4 | fp100MBlkPbootMajorVer | 1 | 1 | The major number of the Management Block Preboot firmware version. For example, if the firmware version is 2.12, the value of th… |
| 1.3.6.1.4.1.232.101.2.1.3.5 | fp100MBlkPbootMinorVer | 1 | 1 | The minor number of the Management Block Preboot firmware version. For example, if the firmware version is 2.12, the value of thi… |
| 1.3.6.1.4.1.232.101.2.1.3.6 | fp100MBlkBootMajorVer | 1 | 1 | The major number of the Management Block Boot firmware version. For example, if the firmware version is 2.12, the value of this o… |
| 1.3.6.1.4.1.232.101.2.1.3.7 | fp100MBlkBootMinorVer | 1 | 1 | The minor number of the Management Block Boot firmware version. For example, if the firmware version is 2.12, the value of this o… |
| 1.3.6.1.4.1.232.101.2.1.3.8 | fp100MBlkRuntimeMajorVer | 1 | 1 | The major number of the Management Block Runtime firmware version. For example, if the firmware version is 2.12, the value of thi… |
| 1.3.6.1.4.1.232.101.2.1.3.9 | fp100MBlkRuntimeMinorVer | 1 | 1 | The minor number of the Management Block Runtime firmware version. For example, if the firmware version is 2.12, the value of thi… |
| 1.3.6.1.4.1.232.101.2.1.3.10 | fp100CongestionStatus | 1 | 1 | The management agent congestion status for the FastPipes100 unit. |
| 1.3.6.1.4.1.232.101.2.1.3.11 | fp100PsAPresent | 1 | 1 | The power supply A present status for the FastPipes100 unit. If this supply is not installed, the value returned is not-present(… |
| 1.3.6.1.4.1.232.101.2.1.3.12 | fp100PsAStatus | 1 | 1 | The power supply A status. The status is available for the FastPipes100 units. If the fp100PsAPresent is not-present(2), then th… |
| 1.3.6.1.4.1.232.101.2.1.3.13 | fp100PsBPresent | 1 | 1 | The power supply B present status for the FastPipes100 unit. If this supply is not installed, the value returned is not-present(… |
| 1.3.6.1.4.1.232.101.2.1.3.14 | fp100PsBStatus | 1 | 1 | The power supply B status. The status is available for the FastPipes100 units. If the fp100PsBPresent is not-present(2), then th… |
| 1.3.6.1.4.1.232.101.2.1.3.15 | fp100WriteCommunity | 1 | 1 | The write community name for the Management Agent. If the value is not public, the write community name is not returned for get … |
| 1.3.6.1.4.1.232.101.2.1.3.16 | fp100WriteProtect | 1 | 1 | When set to ro(2), all supported MIB objects, with the exception of this object, are made read only. This may be used in conjunc… |
| 1.3.6.1.4.1.232.101.2.1.3.17 | fp100VT100ScreenRefresh | 1 | 1 | This object will determine the rate, in seconds, at which the VT100 screen will refresh the automatic fields (e.g., statistics)… |
| 1.3.6.1.4.1.232.101.2.1.3.18 | fp100SwitchReset | 1 | 1 | Setting this object to reset(2) causes the unit to reset the management agent and all ports. All counter values are reset. All n… |
| 1.3.6.1.4.1.232.101.2.1.3.19 | fp100ModemInitString | 1 | 1 | This object provides a Modem Initialization String input which will be used to initialize a modem to the proper configuration. T… |
| 1.3.6.1.4.1.232.101.2.1.3.21 | fp100FlashWriteCycles | 1 | 1 | This object will allow the user to see the number of erase/writes that have been made to the Switching Block extensions firmware… |
| 1.3.6.1.4.1.232.101.2.1.3.22 | fp100BootWriteCycles | 1 | 1 | This object will allow the user to see the number of erase/writes that have been made to the Management Block Boot firmware secto… |
| 1.3.6.1.4.1.232.101.2.1.3.23 | fp100RuntimeWriteCycles | 1 | 1 | This object will allow the user to see the number of erase/writes that have been made to the Management Block Runtime firmware s… |