The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
cpqndot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
Parsed from file Compaq-Vlan.mib.txt
Company: compaq
Module: COMPAQ-VLAN-MIB
cpqndot1dStpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of cpqndot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" ::= { cpqndot1dStpBridgeEntry 16 }
Vendor: Compaq
Module: COMPAQ-VLAN-MIB (Compaq-Vlan.mib)
Type: TABULAR
Access: read-write
Syntax: Timeout
(
400..3000 )
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.2.3.7.1.1 | cpqndot1dStpBridgeIndex | 0 | 0 | Logical bridge group number. This index only exists if ports are allocated to this logical bridge group. |
| 1.3.6.1.4.1.232.101.2.3.7.1.2 | cpqndot1dStpVlanIndex | 0 | 0 | The Vlan ID for this bridge group. The value of this object corresponds to the value of the cpqnVLANInfoVLANNumber of the VLAN th… |
| 1.3.6.1.4.1.232.101.2.3.7.1.3 | cpqndot1dStpBridgeAddr | 0 | 0 | The MAC address assigned to this vlan. This address is the MAC address of the lowest numbered port in the vlan. |
| 1.3.6.1.4.1.232.101.2.3.7.1.4 | cpqndot1dStpPriority | 0 | 0 | The value of the writeable portion of the Bridge ID, i.e., the first two octets of the 8 octet long Bridge ID. The last 6 octets… |
| 1.3.6.1.4.1.232.101.2.3.7.1.5 | cpqndot1dStpTimeSinceTopologyChange | 0 | 0 | The time, in hundredths of a seconds, since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.232.101.2.3.7.1.6 | cpqndot1dStpTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.232.101.2.3.7.1.7 | cpqndot1dStpDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.4.1.232.101.2.3.7.1.8 | cpqndot1dStpRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.232.101.2.3.7.1.9 | cpqndot1dStpRootPort | 0 | 0 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.232.101.2.3.7.1.10 | cpqndot1dStpMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.232.101.2.3.7.1.11 | cpqndot1dStpHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.232.101.2.3.7.1.12 | cpqndot1dStpHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.232.101.2.3.7.1.13 | cpqndot1dStpForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.232.101.2.3.7.1.14 | cpqndot1dStpBridgeMaxAge | 0 | 0 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range… |
| 1.3.6.1.4.1.232.101.2.3.7.1.15 | cpqndot1dStpBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |