Choosing IP Disabled, will cause the switch to not
process any IP or Address Resolution Protocol (ARP)
frames it receives. BootP When Needed, IP is enabled
and will function immediately. Choosing BootP Always,
IP is enabled but will not function until a BootP
reply has been received.
Parsed from file Compaq-n5708.mib.txt
Company: compaq
Module: CPQN5708-MIB
cpqn5708SysIpState OBJECT-TYPE SYNTAX INTEGER { ip-disabled(1), bootp-when_needed(2), bootp-always(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Choosing IP Disabled, will cause the switch to not process any IP or Address Resolution Protocol (ARP) frames it receives. BootP When Needed, IP is enabled and will function immediately. Choosing BootP Always, IP is enabled but will not function until a BootP reply has been received. " ::= { cpqn5708SysConfig 7 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.110.6.2.1.7.0 | cpqn5708SysIpState | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.110.6.2.1.1 | cpqn5708SysAgHwVer | 1 | 1 | Agent board hardware version. |
1.3.6.1.4.1.232.110.6.2.1.2 | cpqn5708SysPowerOnDiagnostics | 1 | 1 | Enable or disables the running of power-on diagnostics when switch is powered on. The default is Enabled. |
1.3.6.1.4.1.232.110.6.2.1.3 | cpqn5708SysSpanningTree | 1 | 1 | Turn Spanning tree function on or off |
1.3.6.1.4.1.232.110.6.2.1.4 | cpqn5708SysIpAddr | 1 | 1 | IP address of the switch. Changes to this object take effect immediately. |
1.3.6.1.4.1.232.110.6.2.1.5 | cpqn5708SysDefaultGateway | 1 | 1 | IP default gateway used by the switch. Changes to this object take effect immediately. |
1.3.6.1.4.1.232.110.6.2.1.6 | cpqn5708SysSubnetMask | 1 | 1 | IP subnet mask of the switch. Changes to this object take effect immediately. |
1.3.6.1.4.1.232.110.6.2.1.8 | cpqn5708SysConsoleTimeOut | 1 | 1 | The number of minutes a console session will remain idle before timing out. |
1.3.6.1.4.1.232.110.6.2.1.9 | cpqn5708SysConsoleBaudRate | 1 | 1 | RS232 port baud rate. |
1.3.6.1.4.1.232.110.6.2.1.10 | cpqn5708SysNumResetSincePwrOns | 1 | 1 | Number of warm resets the switch has executed since the last cold reset or power cycle. |
1.3.6.1.4.1.232.110.6.2.1.11 | cpqn5708SysHealthMonitor | 1 | 1 | There are four display modes that users can see on front panel. The cpqn5708SysHealthMonitor contains one of four display modes m… |
1.3.6.1.4.1.232.110.6.2.1.12 | cpqn5708SysPanelMode | 1 | 1 | cpqn5708 display mode |
1.3.6.1.4.1.232.110.6.2.1.13 | cpqn5708SysSwFwMajorVer | 1 | 1 | Switching(main) board firmware major version |
1.3.6.1.4.1.232.110.6.2.1.14 | cpqn5708SysSwFwMinorVer | 1 | 1 | Switching(main) board firmware minor version |
1.3.6.1.4.1.232.110.6.2.1.15 | cpqn5708SysPortMediaType | 1 | 1 | The media type for the ports |