Compaq IDE Drive Satus.
This indicates the status of the IDE drive.
The following values are defined:
other(1)
The drive does not support drive status monitoring.
ok(2)
The drive is operating normally. No user action is required.
preFailureDegraded(3)
The drive has detected that at least one pre-failure SMART
attribute has gone out of range. The drive may need to be
replaced.
ultraAtaDegraded(4)
The Ultra ATA Integrity Monitor has detected data transmission
errors between the hard drive and processor. For best
performance, move Ultra ATA devices to the primary
controller and non Ultra ATA devices to the secondary
controller. If errors still persist, consider replacing the
standard 40-conductor cable with and 80-conductor cable.
Parsed from file CPQIDE1.MIB.txt
Company: None
Module: CPQIDE-MIB
IDE Drive Satus.
This indicates the status of the IDE drive.
The following values are defined:
other(1)
The drive does not support drive status monitoring.
ok(2)
The drive is operating normally. No user action is required.
preFailureDegraded(3)
The drive has detected that at least one pre-failure SMART
attribute has gone out of range. The drive may need to be
replaced.
ultraAtaDegraded(4)
The Ultra ATA Integrity Monitor has detected data transmission
errors between the hard drive and processor. For best
performance, move Ultra ATA devices to the primary
controller and non Ultra ATA devices to the secondary
controller. If errors still persist, consider replacing the
standard 40-conductor cable with and 80-conductor cable.
Parsed from file CPQIDE-MIB.mib
Module: CPQIDE-MIB
cpqIdeIdentStatus OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), preFailureDegraded(3), ultraAtaDegraded(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq IDE Drive Satus. This indicates the status of the IDE drive. The following values are defined: other(1) The drive does not support drive status monitoring. ok(2) The drive is operating normally. No user action is required. preFailureDegraded(3) The drive has detected that at least one pre-failure SMART attribute has gone out of range. The drive may need to be replaced. ultraAtaDegraded(4) The Ultra ATA Integrity Monitor has detected data transmission errors between the hard drive and processor. For best performance, move Ultra ATA devices to the primary controller and non Ultra ATA devices to the secondary controller. If errors still persist, consider replacing the standard 40-conductor cable with and 80-conductor cable." ::= { cpqIdeIdentEntry 10 }
Vendor: Compaq
Module: CPQIDE-MIB
[Automatically extracted from oidview.com]
cpqIdeIdentStatus OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), preFailureDegraded(3), ultraAtaDegraded(4) } ACCESS read-only STATUS mandatory DESCRIPTION "IDE Drive Satus. This indicates the status of the IDE drive. The following values are defined: other(1) The drive does not support drive status monitoring. ok(2) The drive is operating normally. No user action is required. preFailureDegraded(3) The drive has detected that at least one pre-failure SMART attribute has gone out of range. The drive may need to be replaced. ultraAtaDegraded(4) The Ultra ATA Integrity Monitor has detected data transmission errors between the hard drive and processor. For best performance, move Ultra ATA devices to the primary controller and non Ultra ATA devices to the secondary controller. If errors still persist, consider replacing the standard 40-conductor cable with and 80-conductor cable." ::= { cpqIdeIdentEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.14.2.2.1.1.1 | cpqIdeIdentIndex | 0 | 0 | An index that uniquely specifies each device. For disks, this index value will match the value of the cpqSeFixedDiskIndex in the… |
| 1.3.6.1.4.1.232.14.2.2.1.1.2 | cpqIdeIdentModel | 0 | 0 | IDE Drive Model. The is the drive model name and can be used for identification purposes. |
| 1.3.6.1.4.1.232.14.2.2.1.1.3 | cpqIdeIdentSerNum | 0 | 0 | IDE Drive Serial Number. The is the drive serial number and can be used for identification purposes. |
| 1.3.6.1.4.1.232.14.2.2.1.1.4 | cpqIdeIdentFWVers | 0 | 0 | IDE Firmware Version. This is the version of the firmware on the IDE drive. If the IDE drive firmware version is unavailable, the… |
| 1.3.6.1.4.1.232.14.2.2.1.1.5 | cpqIdeIdentCondition | 0 | 0 | IDE Drive Condition. This is the overall condition of the IDE drive. The following values are defined: other(1) The drive does not … |
| 1.3.6.1.4.1.232.14.2.2.1.1.6 | cpqIdeIdentErrorNumber | 0 | 0 | IDE Error Number. This value represents the error code associated with a failing IDE drive. |
| 1.3.6.1.4.1.232.14.2.2.1.1.7 | cpqIdeIdentType | 0 | 0 | IDE Device Type. This is the type of ATAPI device. The following types are defined: other(1) The Insight agent does not recognize… |
| 1.3.6.1.4.1.232.14.2.2.1.1.8 | cpqIdeIdentTypeExtended | 0 | 0 | IDE Extended Device Type. This is additional information about the type of IDE device. The following types are defined: other(1) Th… |
| 1.3.6.1.4.1.232.14.2.2.1.1.9 | cpqIdeIdentCondition2 | 0 | 0 | IDE Drive Condition. This is the overall condition of the IDE drive. The following values are defined: other(1) The drive does not … |
| 1.3.6.1.4.1.232.14.2.2.1.1.11 | cpqIdeIdentUltraAtaAvailability | 0 | 0 | This describes the availability of Ultra ATA transfers between this device and the controller. The following values are defined: o… |