Compaq SCSI Device Bus Parity Errors.
This is the number of parity errors seen on the SCSI bus while
processing commands for this SCSI ID. This value is maintained
since the SCSI Hardware Interface driver was loaded.
Parity errors may occasionally occur. If this value should rise
dramatically, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured.
Parsed from file CPQSCSI1.MIB.txt
Company: None
Module: CPQSCSI-MIB
SCSI Device Bus Parity Errors.
This is the number of parity errors seen on the SCSI bus while
processing commands for this SCSI ID. This value is maintained
since the SCSI Hardware Interface driver was loaded.
Parity errors may occasionally occur. If this value should rise
dramatically, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured.
Parsed from file CPQSCSI-MIB.mib
Module: CPQSCSI-MIB
cpqScsiTargetParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Bus Parity Errors. This is the number of parity errors seen on the SCSI bus while processing commands for this SCSI ID. This value is maintained since the SCSI Hardware Interface driver was loaded. Parity errors may occasionally occur. If this value should rise dramatically, you may have a problem. Some common causes include radio frequency interference (RFI) on the bus cables, bad or missing terminating resisters on the drives or having more than one device with the same SCSI ID. Insure the bus cable is free of obstructions and that the devices on the bus are properly configured." ::= { cpqScsiTargetEntry 8 }
Vendor: Compaq
Module: CPQSCSI-MIB
[Automatically extracted from oidview.com]
cpqScsiTargetParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SCSI Device Bus Parity Errors. This is the number of parity errors seen on the SCSI bus while processing commands for this SCSI ID. This value is maintained since the SCSI Hardware Interface driver was loaded. Parity errors may occasionally occur. If this value should rise dramatically, you may have a problem. Some common causes include radio frequency interference (RFI) on the bus cables, bad or missing terminating resisters on the drives or having more than one device with the same SCSI ID. Insure the bus cable is free of obstructions and that the devices on the bus are properly configured." ::= { cpqScsiTargetEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.5.2.5.1.1.1 | cpqScsiTargetCntlrIndex | 0 | 0 | SCSI Target Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The contro… |
| 1.3.6.1.4.1.232.5.2.5.1.1.2 | cpqScsiTargetBusIndex | 0 | 0 | SCSI Target Bus Index. The bus index indicates to which SCSI bus instance on an adapter card this table entry belongs. The insta… |
| 1.3.6.1.4.1.232.5.2.5.1.1.3 | cpqScsiTargetScsiIdIndex | 0 | 0 | SCSI Target Device Index. The device index indicates to which device instance on a SCSI bus this table entry belongs. The device… |
| 1.3.6.1.4.1.232.5.2.5.1.1.4 | cpqScsiTargetType | 0 | 0 | SCSI Device Type. This is the type of SCSI device. The following types are defined: other(1) The Insight agent does not recognize… |
| 1.3.6.1.4.1.232.5.2.5.1.1.5 | cpqScsiTargetModel | 0 | 0 | SCSI Device Model. This is a description of the device's model as returned by the SCSI inquiry command. This can be used for ide… |
| 1.3.6.1.4.1.232.5.2.5.1.1.6 | cpqScsiTargetFWRev | 0 | 0 | SCSI Device Firmware Revision. This is the revision level of the device as returned by the SCSI inquiry command. This can be use… |
| 1.3.6.1.4.1.232.5.2.5.1.1.7 | cpqScsiTargetVendor | 0 | 0 | SCSI Device Vendor. This is the device vendor's name as returned by the SCSI inquiry command. This can be used for identificatio… |
| 1.3.6.1.4.1.232.5.2.5.1.1.9 | cpqScsiTargetPhaseErrs | 0 | 0 | SCSI Device Bus Phase Errors. This is the number of times the SCSI bus entered an invalid operating state while processing comman… |
| 1.3.6.1.4.1.232.5.2.5.1.1.10 | cpqScsiTargetSelectTimeouts | 0 | 0 | SCSI Device Bus Select Time-outs. This is the number of times the controller attempted to start communications with a device by s… |
| 1.3.6.1.4.1.232.5.2.5.1.1.11 | cpqScsiTargetMsgRejects | 0 | 0 | SCSI Device Bus Message Rejects. This is the number of times the device rejected a command because it did not support the specifi… |
| 1.3.6.1.4.1.232.5.2.5.1.1.12 | cpqScsiTargetNegPeriod | 0 | 0 | SCSI Device Negotiated Period. This is the amount of time that was negotiated between the controller and the device as a synchron… |
| 1.3.6.1.4.1.232.5.2.5.1.1.13 | cpqScsiTargetLocation | 0 | 0 | SCSI Device Location. This is the physical location of where the device is located. The following values are defined: other(1) The … |
| 1.3.6.1.4.1.232.5.2.5.1.1.14 | cpqScsiTargetNegSpeed | 0 | 0 | SCSI Device Negotiated Speed. This is the data transfer speed that was negotiated between the controller and the device. This va… |
| 1.3.6.1.4.1.232.5.2.5.1.1.15 | cpqScsiTargetPhysWidth | 0 | 0 | SCSI Device Data Bus Physical Width. This is the physical width of the device's SCSI data bus. other(1) The management agent does … |
| 1.3.6.1.4.1.232.5.2.5.1.1.16 | cpqScsiTargetNegWidth | 0 | 0 | SCSI Device Data Bus Negotiated Width. This is the width of the device's SCSI data bus that was negotiated between the controller… |
| 1.3.6.1.4.1.232.5.2.5.1.1.17 | cpqScsiTargetTypeExtended | 0 | 0 | Compaq SCSI Extended Device Type. This is additional information about the type of SCSI device. The following types are defined: o… |
| 1.3.6.1.4.1.232.5.2.5.1.1.18 | cpqScsiTargetCurrentSpeed | 0 | 0 | SCSI Device Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current n… |