Unit of all temperature values and setpoints
Parsed from file RITTAL-CMC-III-MIB.txt
Company: None
Module: RITTAL-CMC-III-MIB
Unit of all temperature values and setpoints
Parsed from file RITTAL-CMC-III-MIB.mib
Module: RITTAL-CMC-III-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
cmcIIISetTempUnit OBJECT-TYPE SYNTAX INTEGER { celsius (1), fahrenheit (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Unit of all temperature values and setpoints" ::= { cmcIIISetupGeneral 1 }
cmcIIISetTempUnit OBJECT-TYPE SYNTAX INTEGER { celsius (1), fahrenheit (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Unit of all temperature values and setpoints" ::= { cmcIIISetupGeneral 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2606.7.3.2.1.0 | cmcIIISetTempUnit | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2606.7.3.2.2 | cmcIIISetBeeper | 1 | 1 | Audible alarm in CMCIII unit: (1) beeper is off (general) (2) beeper is on |
1.3.6.1.4.1.2606.7.3.2.3 | cmcIIIQuitRelay | 1 | 1 | Enable or disable acknowledging currently active alarm relay (with 'C' on CMCIII). |
1.3.6.1.4.1.2606.7.3.2.4 | cmcIIILogicRelay | 1 | 1 | Logic of alarm relay: (1) Relay will pick up in case of an alarm (2) Relay will release in case of an alarm (3) Relay disabled |
1.3.6.1.4.1.2606.7.3.2.5 | cmcIIIUnitMsgRelay | 1 | 1 | Alarm relay in case of Device Messages (detect, lost, changed..): (1) Relay disabled, relay will not switch in case of a device … |
1.3.6.1.4.1.2606.7.3.2.6 | cmcIIIFunctionRelay | 1 | 1 | Logic of alarm relay: (1) Relay will switch in case of a warning only (2) Relay will switch in case of an alarm only (3) Relay wil… |
1.3.6.1.4.1.2606.7.3.2.7 | cmcIIITimeZone | 1 | 1 | Time Zone 0 : (GMT-12:00) International Date Line West 1 : (GMT-11:00) Midway Island, Samoa 2 : (GMT-10:00) Hawaii 3 : (GMT-09:… |
1.3.6.1.4.1.2606.7.3.2.8 | cmcIIISetupDate | 1 | 1 | Actual date in format DD.MM.YYYY Use UTC date to set date. |
1.3.6.1.4.1.2606.7.3.2.9 | cmcIIISetupTime | 1 | 1 | Actual time in format HH:MM:SS, HH (0-23), MM (0-59), SS (0-59). Use UTC time to set time. |
1.3.6.1.4.1.2606.7.3.2.10 | cmcIIIWebAccess | 1 | 1 | Web access status: (0) httpEnabled : http protocol is enabled (1) httpsEnabled : https protocol is enabled |
1.3.6.1.4.1.2606.7.3.2.11 | cmcIIIHttpPort | 1 | 1 | TCP/IP port of HTTP daemon |
1.3.6.1.4.1.2606.7.3.2.12 | cmcIIIHttpsPort | 1 | 1 | TCP/IP port of HTTPS daemon |
1.3.6.1.4.1.2606.7.3.2.13 | cmcIIIFtpAccess | 1 | 1 | Ftp access: (1) disabled (2) enabled |
1.3.6.1.4.1.2606.7.3.2.14 | cmcIIIFtpPort | 1 | 1 | TCP/IP port of FTP daemon |
1.3.6.1.4.1.2606.7.3.2.15 | cmcIIISshAccess | 1 | 1 | Ssh access: (1) disabled (2) enabled |
1.3.6.1.4.1.2606.7.3.2.16 | cmcIIISshPort | 1 | 1 | TCP/IP port of SSH daemon |
1.3.6.1.4.1.2606.7.3.2.17 | cmcIIITelnetAccess | 1 | 1 | Telnet access: (1) disabled (2) enabled |
1.3.6.1.4.1.2606.7.3.2.18 | cmcIIITelnetPort | 1 | 1 | TCP/IP port of telnet daemon |
1.3.6.1.4.1.2606.7.3.2.19 | cmcIIILanguage | 1 | 1 | Language: (1) English, (2) other |