This is the structure of entries in the
frInterfaceConfigTable.
Parsed from file aptis_config.mib.txt
Company: None
Module: APTIS-CONFIG-MIB
This is the structure of entries in the
frInterfaceConfigTable.
Parsed from file APTIS-CONFIG-MIB.mib
Module: APTIS-CONFIG-MIB
Vendor: Aptis Communications, Inc.
Module: APTIS-CONFIG-MIB
[Automatically extracted from oidview.com]
frInterfaceConfigEntry OBJECT-TYPE SYNTAX FrInterfaceConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the structure of entries in the frInterfaceConfigTable." INDEX { frInterfaceConfigPathString } ::= { frInterfaceConfigTable 1 }
frInterfaceConfigEntry OBJECT-TYPE SYNTAX FrInterfaceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the structure of entries in the frInterfaceConfigTable." INDEX { frInterfaceConfigPathString } ::= { frInterfaceConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2637.2.1.3001.1.1 | frInterfaceConfigPathString | 0 | 0 | The absolute path to where this object resides in the Resource Manager tree. |
| 1.3.6.1.4.1.2637.2.1.3001.1.2 | frInterfaceConfigRowStatus | 0 | 0 | This object is used to create a new row, or to modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2637.2.1.3001.1.3 | frInterfaceConfigKeyValue | 0 | 0 | The Key for this instance of the object in the Resource Manager tree. |
| 1.3.6.1.4.1.2637.2.1.3001.1.11 | frInterfaceConfigFrDlcmiIfIndex | 0 | 0 | Unique identifier that identifies this Frame Relay Interface configuration |
| 1.3.6.1.4.1.2637.2.1.3001.1.12 | frInterfaceConfigFrDlcmiLMIType | 0 | 0 | This variable states which Data Link Connec- tion Management scheme is active on the Frame Relay interface. |
| 1.3.6.1.4.1.2637.2.1.3001.1.13 | frInterfaceConfigFrDlcmiAddress | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. Currently, on Q922 is supported. |
| 1.3.6.1.4.1.2637.2.1.3001.1.14 | frInterfaceConfigFrDlcmiAddressLen | 0 | 0 | This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the ad… |
| 1.3.6.1.4.1.2637.2.1.3001.1.15 | frInterfaceConfigFrDlcmiPollingInterval | 0 | 0 | This is the number of seconds between successive status enquiry messages. This is equivalent to T391. |
| 1.3.6.1.4.1.2637.2.1.3001.1.16 | frInterfaceConfigFrDlcmiFullEnquiryInterval | 0 | 0 | Number of status enquiry intervals that pass before issuance of a full status enquiry message. This is equivalent to N391. |
| 1.3.6.1.4.1.2637.2.1.3001.1.17 | frInterfaceConfigFrDlcmiErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is… |
| 1.3.6.1.4.1.2637.2.1.3001.1.18 | frInterfaceConfigFrDlcmiMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents… |
| 1.3.6.1.4.1.2637.2.1.3001.1.19 | frInterfaceConfigFrDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. Currently, any DL… |
| 1.3.6.1.4.1.2637.2.1.3001.1.20 | frInterfaceConfigFrDlcmiMulticast | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service |
| 1.3.6.1.4.1.2637.2.1.3001.1.21 | frInterfaceConfigFrDlcmiLinkType | 0 | 0 | This indicates whether the Frame Relay interface is the Network-side of a UNI (UNI-DCE), User-side of a UNI (UNI-DTE) or a Networ… |
| 1.3.6.1.4.1.2637.2.1.3001.1.22 | frInterfaceConfigFrDlcmiMaxLogIntf | 0 | 0 | Maximum number of Logical Interfaces supported on this Frame Relay Interface |
| 1.3.6.1.4.1.2637.2.1.3001.1.23 | frInterfaceConfigFrDlcmiLinkEnable | 0 | 0 | Specifies whether this interface is to be activated. |
| 1.3.6.1.4.1.2637.2.1.3001.1.24 | frInterfaceConfigFrDlcmiLMIFlowControl | 0 | 0 | Specifies whether LMI based (R-bit) notification performs flow control for the Circuits on this interface. |
| 1.3.6.1.4.1.2637.2.1.3001.1.25 | frInterfaceConfigFrDlcmiBECNFlowControl | 0 | 0 | Specifies whether BECN notification performs flow control for the Circuits on this interface. |
| 1.3.6.1.4.1.2637.2.1.3001.1.26 | frInterfaceConfigFrDlcmiLMIBandwidthControl | 0 | 0 | Specifies whether LMI based CIR notification affects the CIR flow control parameters for the circuits on this interface. |
| 1.3.6.1.4.1.2637.2.1.3001.1.27 | frInterfaceConfigFrDlcmiInjectionManagement | 0 | 0 | Specifies whether injection management (for holding data to prevent exceeding excess rates) is enabled on all circuits on this in… |
| 1.3.6.1.4.1.2637.2.1.3001.1.28 | frInterfaceConfigFrDlcmiMaxFrameSize | 0 | 0 | Specifies maximum frame size allowed on this interface, including data link headers. |
| 1.3.6.1.4.1.2637.2.1.3001.1.29 | frInterfaceConfigFrDlcmiName | 0 | 0 | Frame Relay Interface Name |
| 1.3.6.1.4.1.2637.2.1.3001.1.30 | frInterfaceConfigFrDlcmiLmiDlci | 0 | 0 | The dlci upon which LMI traffic will be broadcast. |
| 1.3.6.1.4.1.2637.2.1.3001.1.31 | frInterfaceConfigFrDlcmiDceErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is… |
| 1.3.6.1.4.1.2637.2.1.3001.1.32 | frInterfaceConfigFrDlcmiDceMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents… |