OID reference
1.3.6.1.4.1.277.15.2.1.1.13
This object is used to enable or disable the processing of FEAC Line Loopback Activate/Deactivate requests on an interface. By default, agents should initialize this object to 'true(1)'
Identification
{1 3 6 1 4 1 277 15 2 1 1 13}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from cascadeds3.mib.txt · cascade · DS3SUPPMIB
Source file: Download cascadeds3.mib.txt
Historical records
dsx3EnableFEACLpbk OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to enable or disable the processing
of FEAC Line Loopback Activate/Deactivate requests on an
interface. By default, agents should initialize this
object to 'true(1)'"
DEFVAL { true }
::= { dsx3ConfigEntry 13 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.15.2.1.1.1 | dsx3ConfigIndex | 0 | 0 | This object is the identifier of a DS3/E3 Interface on a managed device. If there is an ifEntry that is directly associated with… |
| 1.3.6.1.4.1.277.15.2.1.1.2 | dsx3DayTimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end day error measurement period. |
| 1.3.6.1.4.1.277.15.2.1.1.3 | dsx3ValidDayIntervals | 0 | 0 | The number of previous near end Day intervals for which valid data was collected. The value will be 3 unless the interface was b… |
| 1.3.6.1.4.1.277.15.2.1.1.4 | dsx3EnableAllTCAs | 0 | 0 | This object is used to enable or disable the sending of Threshold Crossing Alerts (TCAs) for the all the threshold on an interfac… |
| 1.3.6.1.4.1.277.15.2.1.1.5 | dsx3PLCPAlarmState | 0 | 0 | This object is show current PLCP alarm state. |
| 1.3.6.1.4.1.277.15.2.1.1.6 | dsx3TCAlarmState | 0 | 0 | This object is show current TC alarm state. |
| 1.3.6.1.4.1.277.15.2.1.1.7 | dsx3IdleSignal | 0 | 0 | This object indicates the presence Idle signal being received by this DS3 interface. |
| 1.3.6.1.4.1.277.15.2.1.1.8 | dsx3AICSignal | 0 | 0 | This object indicates the presence of C-bit application or M23/SYNTRAN application based on the AIC signal being received by this… |
| 1.3.6.1.4.1.277.15.2.1.1.9 | dsx3PLCPStatus | 0 | 0 | This object indicates the PLCP Status being received by this DS3 interface. |
| 1.3.6.1.4.1.277.15.2.1.1.10 | dsx3TCStatus | 0 | 0 | This object indicates the presence FEBE being received by this DS3 interface. |
| 1.3.6.1.4.1.277.15.2.1.1.11 | dsx3FEBE | 0 | 0 | This object indicates the presence FEBE being received by this DS3 interface. |
| 1.3.6.1.4.1.277.15.2.1.1.12 | dsx3FEAC | 0 | 0 | This object indicates the presence FEAC being received by this DS3 interface. Non zero INTEGER indicating the current DS3 FEAC s… |
| 1.3.6.1.4.1.277.15.2.1.1.14 | dsx3FEACCode | 0 | 0 | This object specifies the FEAC Codeword values to be used to be transmit received by this DS3 interface. Non zero INTEGER indicati… |
| 1.3.6.1.4.1.277.15.2.1.1.15 | dsx3AlarmFailureTime | 0 | 0 | The amount of time a defect persists on a DS3 interface before declaring failure for all alarms. The value is specificed in mill… |
| 1.3.6.1.4.1.277.15.2.1.1.16 | dsx3AlarmClearTime | 0 | 0 | The amount of time a defect does not persists on a DS3 interface before clearing failure for all alarms. The value is specificed… |