OID reference

stmShowProfileType

1.3.6.1.4.1.27975.33.1.3.1.1

Description

STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use thi…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.27975.33.1.3.1 (stmShowEntry)
Node code
1
Node name
stmShowProfileType
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.27975.33.1.3.1.1
URN notation
urn:oid:1.3.6.1.4.1.27975.33.1.3.1.1
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 27975 33 1 3 1 1}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) switch(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) centec(27975) stm(33) stmMibObject(1) stmShowTable(3) stmShowEntry(1) stmShowProfileType(1)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/27975/33/1/3/1/1
  • /ISO/Identified-Organization/6/1/4/1/27975/33/1/3/1/1
  • /ISO/3/6/1/4/1/27975/33/1/3/1/1
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/27975/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/enterprise/switch/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/enterprise/centec/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/enterprises/27975/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/enterprises/switch/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/enterprises/centec/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/27975/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/switch/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/centec/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/vendor-objects/27975/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/vendor-objects/switch/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/identified-organization/dod/internet/private/vendor-objects/centec/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/org/dod/internet/private/enterprise/27975/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/org/dod/internet/private/enterprise/switch/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/org/dod/internet/private/enterprise/centec/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • /iso/org/dod/internet/private/enterprises/27975/stm/stmMibObject/stmShowTable/stmShowEntry/stmShowProfileType
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

ValueName
1default
2access
3ipucv4
4vlan
5l2vpn
6route
7v4acl
8v6acl
9ipucv6

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In SWITCH, the row index stmShowProfileType is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.27975.33.1.3.1.1.<stmShowProfileType>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.27975.33.1.3.1.1

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

stmShowProfileType  OBJECT-TYPE
    SYNTAX          INTEGER
        {
            default(1),
            access(2),
            ipucv4(3),
            vlan(4),
            l2vpn(5),
            route(6),
            v4acl(7),
            v6acl(8),
            ipucv6(9)

        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(1)  provide balance to all features.
        access(2)   provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
        ipvuc4(3)   provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(4)     provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        l2vpn(5)    provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
        ipv6(6)     provide maximum system utilization for IPv6 unicast routing.
        route(7)    provide maximum system utilization for Ucast Routes.
        v4acl(8)    provide maximum system utilization for IPv4 ACL.
        v6acl(9)    provide maximum system utilization for IPv6 ACL.
        hardware(50) provide default hardware configure."
    ::= { stmShowEntry 1 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image. ipv6(6) provide maximum system utilization for IPv6 unicast routing. route(7) provide maximum system utilization for Ucast Routes. v4acl(8) provide maximum system utilization for IPv4 ACL. v6acl(9) provide maximum system utilization for IPv6 ACL. hardware(50) provide default hardware configure.

Sources for this description

FS.COM MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1FS.COM MIB copies (LibreNMS/Observium Community)1 record · 2 sources

Description 1

stmShowProfileType · currentFS.COM MIB copies (LibreNMS/Observium Community)2 sources

Status in source: current.

Names: stmShowProfileType

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "stmShowProfileType",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "default",
    "(",
    "1",
    ")",
    ",",
    "access",
    "(",
    "2",
    ")",
    ",",
    "ipucv4",
    "(",
    "3",
    ")",
    ",",
    "vlan",
    "(",
    "4",
    ")",
    ",",
    "l2vpn",
    "(",
    "5",
    ")",
    ",",
    "route",
    "(",
    "6",
    ")",
    ",",
    "v4acl",
    "(",
    "7",
    ")",
    ",",
    "v6acl",
    "(",
    "8",
    ")",
    ",",
    "ipucv6",
    "(",
    "9",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image. ipv6(6) provide maximum system utilization for IPv6 unicast routing. route(7) provide maximum system utilization for Ucast Routes. v4acl(8) provide maximum system utilization for IPv4 ACL. v6acl(9) provide maximum system utilization for IPv6 ACL. hardware(50) provide default hardware configure.\"",
    "::=",
    "{",
    "stmShowEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "default",
            1
          ],
          [
            "access",
            2
          ],
          [
            "ipucv4",
            3
          ],
          [
            "vlan",
            4
          ],
          [
            "l2vpn",
            5
          ],
          [
            "route",
            6
          ],
          [
            "v4acl",
            7
          ],
          [
            "v6acl",
            8
          ],
          [
            "ipucv6",
            9
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image. ipv6(6) provide maximum system utilization for IPv6 unicast routing. route(7) provide maximum system utilization for Ucast Routes. v4acl(8) provide maximum system utilization for IPv4 ACL. v6acl(9) provide maximum system utilization for IPv6 ACL. hardware(50) provide default hardware configure."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.27975)

Zhang Jian-bo

Siblings (51)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.27975.33.1.3.1.2 stmShowVlanNumber00
1.3.6.1.4.1.27975.33.1.3.1.3 stmShowVlanForwardingInstances00
1.3.6.1.4.1.27975.33.1.3.1.4 stmShowUcastMacAddresses00
1.3.6.1.4.1.27975.33.1.3.1.5 stmShowMcastMacAddresses00
1.3.6.1.4.1.27975.33.1.3.1.6 stmShowBlackholeMacAddresses00
1.3.6.1.4.1.27975.33.1.3.1.7 stmShowMaxAppliedVlanMapping00
1.3.6.1.4.1.27975.33.1.3.1.8 stmShowCfmLocalAndRemoteMeps00
1.3.6.1.4.1.27975.33.1.3.1.9 stmShowG8031Groups00
1.3.6.1.4.1.27975.33.1.3.1.10 stmShowG8032Rings00
1.3.6.1.4.1.27975.33.1.3.1.11 stmShowMacBasedVlanClassification00
1.3.6.1.4.1.27975.33.1.3.1.12 stmShowIpv4BasedVlanClassification00
1.3.6.1.4.1.27975.33.1.3.1.13 stmShowIpv6BasedVlanClassification00
1.3.6.1.4.1.27975.33.1.3.1.14 stmShowIpv4HostRoutes00
1.3.6.1.4.1.27975.33.1.3.1.15 stmShowIndirectIpv4Routes00
1.3.6.1.4.1.27975.33.1.3.1.16 stmShowIpv4EcmpGroups00
1.3.6.1.4.1.27975.33.1.3.1.17 stmShowIpv6HostRoutes00
1.3.6.1.4.1.27975.33.1.3.1.18 stmShowIndirectIpv6Routes00
1.3.6.1.4.1.27975.33.1.3.1.19 stmShowIpv6EcmpGroups00
1.3.6.1.4.1.27975.33.1.3.1.20 stmShowIpTunnelPeers00
1.3.6.1.4.1.27975.33.1.3.1.21 stmShowNatForIviPeers00
1.3.6.1.4.1.27975.33.1.3.1.22 stmShowIpv4McastRoutes00
1.3.6.1.4.1.27975.33.1.3.1.23 stmShowIpv4McastTotalMembers00
1.3.6.1.4.1.27975.33.1.3.1.24 stmShowIpv6McastRoutes00
1.3.6.1.4.1.27975.33.1.3.1.25 stmShowIpv6McastTotalMembers00
1.3.6.1.4.1.27975.33.1.3.1.26 stmShowIpv4SourceGuardEntries00
1.3.6.1.4.1.27975.33.1.3.1.27 stmShowIpv6SourceGuardEntries00
1.3.6.1.4.1.27975.33.1.3.1.28 stmShowIpv4AclAndQosFlowEntries00
1.3.6.1.4.1.27975.33.1.3.1.29 stmShowIpv6AclAndQosFlowEntries00
1.3.6.1.4.1.27975.33.1.3.1.30 stmShowFtn00
1.3.6.1.4.1.27975.33.1.3.1.31 stmShowIncomingLabelMap00
1.3.6.1.4.1.27975.33.1.3.1.32 stmShowVpws00
1.3.6.1.4.1.27975.33.1.3.1.33 stmShowLspPe00
1.3.6.1.4.1.27975.33.1.3.1.34 stmShowLspP00
1.3.6.1.4.1.27975.33.1.3.1.35 stmShowVplsPeer00
1.3.6.1.4.1.27975.33.1.3.1.36 stmShowVplsAc00
1.3.6.1.4.1.27975.33.1.3.1.37 stmShowVplsInstance00
1.3.6.1.4.1.27975.33.1.3.1.38 stmShowLspOam00
1.3.6.1.4.1.27975.33.1.3.1.39 stmShowOamForPseudoWrie00
1.3.6.1.4.1.27975.33.1.3.1.40 stmShowMplsApsTunnel00
1.3.6.1.4.1.27975.33.1.3.1.41 stmShowVlanMappingEntryAppliedPort00
1.3.6.1.4.1.27975.33.1.3.1.42 stmShowVlanMemberPorts00
1.3.6.1.4.1.27975.33.1.3.1.43 stmShowVlanMappingDefaultEntry00
1.3.6.1.4.1.27975.33.1.3.1.44 stmShowL2mcMemberPorts00
1.3.6.1.4.1.27975.33.1.3.1.45 stmShowL2mcv6Entries00
1.3.6.1.4.1.27975.33.1.3.1.46 stmShowL2mcv6MemberPorts00
1.3.6.1.4.1.27975.33.1.3.1.47 stmShowPBREntries00
1.3.6.1.4.1.27975.33.1.3.1.48 stmShowPBRv6Entries00
1.3.6.1.4.1.27975.33.1.3.1.49 stmShowVoiceVlan00
1.3.6.1.4.1.27975.33.1.3.1.50 stmShowG8032MemberPortsPerRing00
1.3.6.1.4.1.27975.33.1.3.1.51 stmShowMPLSLables00