This object controls value of inactivity timeout [min]
which will be used to disconnect an idle user from
the Out-of-Band Management system.
The default value is 3 min.
Value 0 disables this feature (infinite timeout)
Parsed from file Olicom-MIB.mib
Module: Olicom-MIB
obmInactivityTimeout OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object controls value of inactivity timeout [min] which will be used to disconnect an idle user from the Out-of-Band Management system. The default value is 3 min. Value 0 disables this feature (infinite timeout)" ::= { obm 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.285.6.1 | obmEnable | 0 | 0 | This object controls whether the Olicom Out-Of-Band Management system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.6.2 | obmPassword | 0 | 0 | A string containing the password needed to access the device through the OBM communication port. NOTE: Reading the password will … |
| 1.3.6.1.4.1.285.6.3 | obmBaudrate | 0 | 0 | This object controls the baudrate of the communication port used by the Out-of-Band Management system. The 'auto' means automatic… |
| 1.3.6.1.4.1.285.6.4 | obmParity | 0 | 0 | This object controls the parity of the communication port used by the Out-of-Band Management system. |
| 1.3.6.1.4.1.285.6.5 | obmStopbits | 0 | 0 | This object controls the number of stopbits of the communication port used by the Out-of-Band Management system. |
| 1.3.6.1.4.1.285.6.6 | obmModemInit | 0 | 0 | A string containing the initialization string used to initialize the modem connected to the OBM communication port. This string w… |
| 1.3.6.1.4.1.285.6.7 | obmCallbackEnable | 0 | 0 | This object controls whether the Olicom Out-Of-Band Management Callback sub-system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.6.8 | obmCallbackPhoneNumber | 0 | 0 | A string containing the default phone number to be used by the callback sub-system. This string will be sent `as is' to the modem… |
| 1.3.6.1.4.1.285.6.9 | obmCalloutEnable | 0 | 0 | This object controls whether the Olicom Out-Of-Band Management Callout sub-system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.6.10 | obmCalloutPhoneNumber | 0 | 0 | A string containing the telephone number to be used by the callout sub-system. This string will be sent `as is' to the modem conn… |
| 1.3.6.1.4.1.285.6.11 | obmCalloutTriggerEvent | 0 | 0 | This object controls which events will trigger the callout sub-system to try to establish a connection using the obmCalloutPhoneN… |
| 1.3.6.1.4.1.285.6.12 | obmCalloutRetries | 0 | 0 | This value denotes the number of times the callout sub-system will try to establish a connection using the obmCallbackPhoneNumber… |
| 1.3.6.1.4.1.285.6.13 | obmCalloutRetryTimer | 0 | 0 | This value denotes the number of minutes between unsuccesful attempts to establish a connection using the obmCalloutPhoneNumber s… |
| 1.3.6.1.4.1.285.6.14 | obmDelayedRecovery | 0 | 0 | This object controls whether the Olicom Out-Of-Band Management delayed Recovery sub-system should be active (enabled) or not. On… |
| 1.3.6.1.4.1.285.6.15 | obmEnableTelnet | 0 | 0 | This object controls whether the Olicom Out-Of-Band Management can be accessed from telnet. |
| 1.3.6.1.4.1.285.6.16 | obmConnectTimeout | 0 | 0 | This value denotes the number of seconds the user must wait after 3 unsuccesfull attempts to enter the correct password. The defau… |
| 1.3.6.1.4.1.285.6.17 | obmDefaultOperationalMode | 0 | 0 | This object controls whether the Olicom Out-Of-Band Management can be accessed via serial console or async PPP/SLIP or selected d… |
| 1.3.6.1.4.1.285.6.19 | obmDialType | 0 | 0 | This object controls if ATDP or ATDT will be sent to a modem while dialing from the Out-of-Band Management system. |
| 1.3.6.1.4.1.285.6.20 | obmPasswordRead | 0 | 0 | A string containing the password needed to read-access the device through the OBM communication port. NOTE: Reading the password … |
| 1.3.6.1.4.1.285.6.21 | obmXonXoffHandshake | 0 | 0 | The status of Xon/Xoff flow control. |
| 1.3.6.1.4.1.285.6.22 | obmRtsCtsHandshake | 0 | 0 | The status of RTS/CTS handshake. |
| 1.3.6.1.4.1.285.6.23 | obmDatabits | 0 | 0 | Number of databits to be used by serial interface. |