Fibre Channel Port Mode.
Parsed from file SANMgr.mib.txt
Company: None
Module: SANMgrV1-MIB
Fibre Channel Port Mode.
Parsed from file SANMgrV1-MIB.mib
Module: SANMgrV1-MIB
Vendor: Pathlight Technology Inc.
Module: SANMgrV1-MIB
[Automatically extracted from oidview.com]
fcPortMode OBJECT-TYPE SYNTAX FibrePortMode ACCESS read-write STATUS mandatory DESCRIPTION "Fibre Channel Port Mode." ::= { fcCtlrEntry 13 }
fcPortMode OBJECT-TYPE SYNTAX FibrePortMode ACCESS read-write STATUS mandatory DESCRIPTION "Fibre Channel Port Mode." ::= { fcCtlrEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2935.4.2.1.1 | fcStatus | 0 | 0 | Status of the Fibre Channel Controller |
1.3.6.1.4.1.2935.4.2.1.2 | fcMaxSpeed | 0 | 0 | Maximum Transfer Speed in MBytes per second. |
1.3.6.1.4.1.2935.4.2.1.3 | fcWWID | 0 | 0 | World Wide Identifier for this Fibre Channel Controller. |
1.3.6.1.4.1.2935.4.2.1.4 | fcFWRev | 0 | 0 | Firmware revision number/identifier for this Fibre Channel Controller. |
1.3.6.1.4.1.2935.4.2.1.5 | fcHWRev | 0 | 0 | Hardware revision number/identifier for this Fibre Channel Controller. |
1.3.6.1.4.1.2935.4.2.1.6 | fcLoopID | 0 | 0 | Fibre Channel Loop ID. soft = -1 |
1.3.6.1.4.1.2935.4.2.1.7 | fcFrameSize | 0 | 0 | Fibre Channel frame size. |
1.3.6.1.4.1.2935.4.2.1.8 | fcPortType | 0 | 0 | Fibre Channel Port Type |
1.3.6.1.4.1.2935.4.2.1.9 | fcMedia | 0 | 0 | Media type for this Fibre Channel Controller |
1.3.6.1.4.1.2935.4.2.1.10 | fcSerialNumber | 0 | 0 | Serial Number for this Fibre Channel Controller. |
1.3.6.1.4.1.2935.4.2.1.11 | fcLoopIDMode | 0 | 0 | Fibre Channel Loop ID mode (soft or hard) |
1.3.6.1.4.1.2935.4.2.1.12 | fcALPhysicalAddress | 0 | 0 | Arbitrated Loop Physical Address (ALPA) |
1.3.6.1.4.1.2935.4.2.1.14 | fcConnectionOptions | 0 | 0 | Connection options for ISP2200 FC chip. Values 4 - 8 are reserved. |
1.3.6.1.4.1.2935.4.2.1.15 | fcCtlrChipType | 0 | 0 | Type of Fibre Channel controller chip. Valid types are 2100 , 2200 for QLogic ISP2100 and ISP2200 chips. |
1.3.6.1.4.1.2935.4.2.1.16 | fcTapeFeature | 0 | 0 | Status of Fibre Channel Tape Specification support. true means this controller supports FC Tape false means this controller does… |
1.3.6.1.4.1.2935.4.2.1.17 | fcHardID | 0 | 0 | Fibre Channel Hard ID, the preferred loop ID for this controller. Even if the controller is in Hard Loop ID mode, the actual loo… |
1.3.6.1.4.1.2935.4.2.1.18 | fcCurrentSpeedSetting | 0 | 0 | Speed in Gb/sec. 0: Auto, 1: 1Gb, 2: 2Gb |
1.3.6.1.4.1.2935.4.2.1.19 | fcCurrentSpeed | 0 | 0 | Current Speed Indicator Gb/sec. |
1.3.6.1.4.1.2935.4.2.1.20 | fcFrameBufferSize | 0 | 0 | Fibre Channel Frame Buffer Size |
1.3.6.1.4.1.2935.4.2.1.21 | fcLinkFailureCount | 0 | 0 | Fibre Channel Link Failure Count |
1.3.6.1.4.1.2935.4.2.1.22 | fcLossSyncCount | 0 | 0 | Fibre Channel Loss of Sync Count |
1.3.6.1.4.1.2935.4.2.1.23 | fcLossSignalCount | 0 | 0 | Fibre Channel Loss of Signal Count |
1.3.6.1.4.1.2935.4.2.1.24 | fcProtocolErrorCount | 0 | 0 | Fibre Channel Primitive Sequence Protocol Error Count |
1.3.6.1.4.1.2935.4.2.1.25 | fcInvalidTxWordCount | 0 | 0 | Fibre Channel Invalid Transmission Word Count |
1.3.6.1.4.1.2935.4.2.1.26 | fcInvalidCRCCount | 0 | 0 | Fibre Channel Invalid CRC Count |
1.3.6.1.4.1.2935.4.2.1.27 | fcWWNodeName | 0 | 0 | The World Wide Node Name for this Fibre Channel Controller. The Node Name for this port may computer strictly on the World Wide N… |