fsMgmdIgmpTraceLevel

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "fsMgmdIgmpTraceLevel",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\" This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Management, 1 - Data Path, 2 - Control Plane, 3 - Rx, 4 - Tx, 5 - All Failures. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to Data Path and Control Plane will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "fsmgmd",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Management, 1 - Data Path, 2 - Control Plane, 3 - Rx, 4 - Tx, 5 - All Failures. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to Data Path and Control Plane will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "fsMgmdIgmpTraceLevel",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\" This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "fsmgmd",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}