OID reference
1.3.6.1.4.1.29601.2.62.1.4
This variable controls the global status of the MLD protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables MLD on all the IGMP enabled interfaces. Default value of this entry will be …
Identification
{1 3 6 1 4 1 29601 2 62 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 1 |
| 2 | disabled | 1 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.29601.2.62.1.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
fsMgmdMldGlobalStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the global status of
the MLD protocol in the router. It must be
made up for protocol functioning.Making this
object 'disabled' will remove all dynamic multicast
entries stop all the timers for route entries and
disables MLD on all the IGMP enabled interfaces.
Default value of this entry will be 'disabled'."
DEFVAL { disabled }
::= { fsmgmd 4 }fsMgmdMldTraceLevel OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Trace Statements in MLD Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Trace. The bits represents the levels as
follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path,
3 - Control Plane, 4 - packet Dump, 5 - All resources except
buffer, 6 - All Failures, 7 - Buffer. The remaining
bits are unused. The combination of levels are also allowed.
For example if the bits 1 and 2 are set, then the Trace
statements related to management and Data Path will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { fsmgmd 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This variable controls the global status of the MLD protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables MLD on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
This is used to enable Trace Statements in MLD Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6.
Belden, GarrettCom and Hirschmann IT official standalone MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: fsMgmdMldGlobalStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsMgmdMldGlobalStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variable controls the global status of the MLD protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables MLD on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"fsmgmd",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variable controls the global status of the MLD protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables MLD on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: ARICENT-MGMD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Counter32', 'Integer32', 'enterprises', 'MODULE-IDENTITY', 'Unsigned32', 'IpAddress'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Status in source: current.
Names: fsMgmdMldTraceLevel
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsMgmdMldTraceLevel",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" This is used to enable Trace Statements in MLD Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"fsmgmd",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This is used to enable Trace Statements in MLD Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: ARICENT-MGMD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Counter32', 'Integer32', 'enterprises', 'MODULE-IDENTITY'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.62.1.1 | fsMgmdIgmpGlobalStatus | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.62.1.2 | fsMgmdIgmpTraceLevel | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.62.1.3 | fsMgmdIgmpDebugLevel, fsMgmdMldGlobalStatus | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.62.1.5 | fsMgmdMldTraceLevel, fsMgmdInterfaceTable | 1 | 26 | |
| 1.3.6.1.4.1.29601.2.62.1.6 | fsMgmdMldDebugLevel | 0 | 0 | |
| 1.3.6.1.4.1.29601.2.62.1.7 | fsMgmdInterfaceTable | 1 | 48 | |
| 1.3.6.1.4.1.29601.2.62.1.8 | fsMgmdScalarGroup | 3 | 3 | |
| 1.3.6.1.4.1.29601.2.62.1.9 | fsMgmdSSMMapGroupTable | 1 | 5 | |
| 1.3.6.1.4.1.29601.2.62.1.26 | fsMgmdCacheTable | 1 | 5 |