SMDS Source address for the Segmentation And
Reassembly Processor's Packet Test mode. This is
expressed as ASCII characters which represent
a 64-bit value.
Parsed from file dl200_.mib.txt
Company: diglink
Module: DL200-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
txGenSa OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "SMDS Source address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characters which represent a 64-bit value. " ::= { testConfig 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.103.5.8.0 | txGenSa | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.103.5.1 | networkLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
| 1.3.6.1.4.1.300.103.5.2 | payloadLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
| 1.3.6.1.4.1.300.103.5.3 | dteLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
| 1.3.6.1.4.1.300.103.5.4 | dteNetLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
| 1.3.6.1.4.1.300.103.5.5 | txMidOverride | 1 | 1 | This parameter enables the Tx MID Override test mode of the Segmentation And Reassembly Processor. |
| 1.3.6.1.4.1.300.103.5.6 | testMID | 1 | 1 | This parameter specifies the test MID value of the Segmentation And Reassembly Processor. |
| 1.3.6.1.4.1.300.103.5.7 | txGen | 1 | 1 | This parameter enables the Packet Generator Test mode of the Segmentation And Reassembly Processor. |
| 1.3.6.1.4.1.300.103.5.9 | txGenDa | 1 | 1 | SMDS Destination address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characters … |
| 1.3.6.1.4.1.300.103.5.10 | txGenIpSa | 1 | 1 | SMDS IP Source address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characters wh… |
| 1.3.6.1.4.1.300.103.5.11 | txGenIpDa | 1 | 1 | SMDS IP Destination address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characte… |
| 1.3.6.1.4.1.300.103.5.12 | txGenBytes | 1 | 1 | This parameter describes the number of bytes per packet for the Packets Test mode of the Segmentation And Reassembly Processor. |
| 1.3.6.1.4.1.300.103.5.13 | txGenRate | 1 | 1 | This parameter describes the inter-packet delay for the Packets Test mode of the Segmentation And Reassembly Processor. |
| 1.3.6.1.4.1.300.103.5.14 | txSetCode | 1 | 1 | This parameter enables or disables the transmission SET codes. |
| 1.3.6.1.4.1.300.103.5.15 | txResetCode | 1 | 1 | This parameter enables or disables the transmission RESET codes. |
| 1.3.6.1.4.1.300.103.5.16 | txSetInvCode | 1 | 1 | This parameter enables or disables the transmission inverted SET codes. |
| 1.3.6.1.4.1.300.103.5.17 | txResetInvCode | 1 | 1 | This parameter enables or disables the transmission inverted RESET codes. |