This parameter enables or disables the transmission
inverted SET codes.
Parsed from file dl200e_.mib.txt
Company: diglink
Module: DL200E-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
txSetInvCode OBJECT-TYPE SYNTAX INTEGER { Disabled(1), Enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enables or disables the transmission inverted SET codes." ::= { testConfig 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.300.153.5.16.0 | txSetInvCode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.300.153.5.1 | networkLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
1.3.6.1.4.1.300.153.5.2 | payloadLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
1.3.6.1.4.1.300.153.5.3 | dteLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
1.3.6.1.4.1.300.153.5.4 | dteNetLoopback | 1 | 1 | This parameter specifies the test mode of the network interface. |
1.3.6.1.4.1.300.153.5.5 | txMidOverride | 1 | 1 | This parameter enables the Tx MID Override test mode of the Segmentation And Reassembly Processor. |
1.3.6.1.4.1.300.153.5.6 | testMID | 1 | 1 | This parameter specifies the test MID value of the Segmentation And Reassembly Processor. |
1.3.6.1.4.1.300.153.5.7 | txGen | 1 | 1 | This parameter enables the Packet Generator Test mode of the Segmentation And Reassembly Processor. |
1.3.6.1.4.1.300.153.5.8 | txGenSa | 1 | 1 | SMDS Source address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characters which… |
1.3.6.1.4.1.300.153.5.9 | txGenDa | 1 | 1 | SMDS Destination address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characters … |
1.3.6.1.4.1.300.153.5.10 | txGenIpSa | 1 | 1 | SMDS IP Source address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characters wh… |
1.3.6.1.4.1.300.153.5.11 | txGenIpDa | 1 | 1 | SMDS IP Destination address for the Segmentation And Reassembly Processor's Packet Test mode. This is expressed as ASCII characte… |
1.3.6.1.4.1.300.153.5.12 | txGenBytes | 1 | 1 | This parameter describes the number of bytes per packet for the Packets Test mode of the Segmentation And Reassembly Processor. |
1.3.6.1.4.1.300.153.5.13 | txGenRate | 1 | 1 | This parameter describes the inter-packet delay for the Packets Test mode of the Segmentation And Reassembly Processor. |
1.3.6.1.4.1.300.153.5.14 | txSetCode | 1 | 1 | This parameter enables or disables the transmission SET codes. |
1.3.6.1.4.1.300.153.5.15 | txResetCode | 1 | 1 | This parameter enables or disables the transmission RESET codes. |
1.3.6.1.4.1.300.153.5.17 | txResetInvCode | 1 | 1 | This parameter enables or disables the transmission inverted RESET codes. |