Dsx1 framing type:
T1
E1
Unstructured is E1 only,
when in this mode, the E1 line acts like
a 2048 Bps pipe with no framing information.
Parsed from file eclips_s.mib.txt
Company: None
Module: DL-NEW-DSX1-MIB
Dsx1 framing type:
T1
E1
Unstructured is E1 only,
when in this mode, the E1 line acts like
a 2048 Bps pipe with no framing information.
Parsed from file DL-NEW-DSX1-MIB.mib
Module: DL-NEW-DSX1-MIB
Vendor: Digital Link
Module: DL-NEW-DSX1-MIB
[Automatically extracted from oidview.com]
dlcDsx1Framing OBJECT-TYPE SYNTAX INTEGER { esfFraming (1), d4Framing (2), crc4Enabled (3), crc4Disabled (4), unstructured (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Dsx1 framing type: T1 E1 Unstructured is E1 only, when in this mode, the E1 line acts like a 2048 Bps pipe with no framing information." ::= { dlcDsx1ConfigEntry 2 }
dlcDsx1Framing OBJECT-TYPE SYNTAX INTEGER { esfFraming (1), d4Framing (2), crc4Enabled (3), crc4Disabled (4), unstructured (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Dsx1 framing type: T1 E1 Unstructured is E1 only, when in this mode, the E1 line acts like a 2048 Bps pipe with no framing information." ::= { dlcDsx1ConfigEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.21.1.1 | dlcDsx1ConfigPortId | 0 | 0 | Uniquely identifies this port. Valid values are `mainNet', `aux', `otherNet'. |
| 1.3.6.1.4.1.300.200.2.21.1.3 | dlcDsx1LineCode | 0 | 0 | Dsx1 line code type, AMI or B8ZS. E1 lines are always HDB3. |
| 1.3.6.1.4.1.300.200.2.21.1.4 | dlcDsx1LineMatching | 0 | 0 | Dsx1 line build out or equalization: For a T1 NET port, LBO is 0, -7.5 or -15dB. For a T1 AUX port, EQ is 0..533 feet. For any E1 … |
| 1.3.6.1.4.1.300.200.2.21.1.5 | dlcDsx1DacsMode | 0 | 0 | True if DACS mode is in effect for this port. |
| 1.3.6.1.4.1.300.200.2.21.1.6 | dlcDsx1UseDlcFdlProtocol | 0 | 0 | True when DLC FDL protocol is enabled over this port's FDL. |
| 1.3.6.1.4.1.300.200.2.21.1.7 | dlcDsx1UseAnsiProtocol | 0 | 0 | True if ANSI Dsx1.403 is enabled over the FDL. |
| 1.3.6.1.4.1.300.200.2.21.1.8 | dlcDsx1Bit7Stuffing | 0 | 0 | When true, bit 7 stuffing is turned on for a T1 Aux port to provide pulse density protection. Valid only on a T1 AUX port. |
| 1.3.6.1.4.1.300.200.2.21.1.9 | dlcDsx1InBandBit | 0 | 0 | Specifies which bit in Timeslot 1 of an E1 link is used to pass message traffic. Not implemented for T1 ports. |