The type of traffic expected on the link for inband management and IPM.
Parsed from file eclips_s.mib.txt
Company: None
Module: DL-NEW-DSX1-MIB
The type of traffic expected on the link for inband management and IPM.
Parsed from file DL-NEW-DSX1-MIB.mib
Module: DL-NEW-DSX1-MIB
Vendor: Digital Link
Module: DL-NEW-DSX1-MIB
[Automatically extracted from oidview.com]
dlcUnitInbandMode OBJECT-TYPE SYNTAX INTEGER { noInband ( 1 ), frameRelay ( 2 ), ciscoHdlc ( 3 ) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic expected on the link for inband management and IPM." ::= { dlcUnitConfig 28 }
dlcUnitInbandMode OBJECT-TYPE SYNTAX INTEGER { noInband ( 1 ), frameRelay ( 2 ), ciscoHdlc ( 3 ) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic expected on the link for inband management and IPM." ::= { dlcUnitConfig 28 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.28.0 | dlcUnitInbandMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.1 | dlcUnitId | 1 | 1 | A name that uniquely and globally identifies the unit. The Unit ID must consist of (upper-case) letters 'A'..'Z' and digits '0'..… |
| 1.3.6.1.4.1.300.200.2.2 | dlcUnitProtectMode | 1 | 1 | When true, the unit configuration can not be changed from the front panel nor can tests be initiated or terminated from the front … |
| 1.3.6.1.4.1.300.200.2.3 | dlcUnitYellowEnable | 1 | 1 | When false, yellow alarm conditions are ignored when received from a Dsx1 port, and the unit will never transmit a Yellow Alarm s… |
| 1.3.6.1.4.1.300.200.2.4 | dlcUnitNetPassFdl | 1 | 1 | Indicates which Dsx1 DTE port's FDL is connected to the `mainNet' FDL when this unit has no traffic of its own. Meaninigful values… |
| 1.3.6.1.4.1.300.200.2.5 | dlcUnitMainClockSource | 1 | 1 | This is the primary transmit timing source. |
| 1.3.6.1.4.1.300.200.2.6 | dlcUnitAltClockSource | 1 | 1 | This is the alternate transmit timing source. It is used when the primary source is not available. |
| 1.3.6.1.4.1.300.200.2.7 | dlcUnitExtClockRate | 1 | 1 | The signal arriving at the BNC connector on the back of the unit, in units of KHz. Must be a multiple of 56 or 64 KHz (n*56 or n*… |
| 1.3.6.1.4.1.300.200.2.8 | dlcUnitFullBandwidthLoopCode | 1 | 1 | Determines the loop codes we transmit for the Full Bandwidth Loop Up Remote and Loop Down Remote tests and the code we respond to… |
| 1.3.6.1.4.1.300.200.2.9 | dlcUnitFractionalLoopCode | 1 | 1 | Determines the loop codes we transmit for the Fractional Loop Up Remote and Loop Down Remote tests and the code we respond to when… |
| 1.3.6.1.4.1.300.200.2.10 | dlcUnitTestLength | 1 | 1 | Determines the time interval after which tests are automatically terminated. Valid values are 0, 1, 15 and 60. 0 stands for unlimi… |
| 1.3.6.1.4.1.300.200.2.11 | dlcUnitUserPattern1 | 1 | 1 | This is a sequence of the characters '0' and '1' that represents the first of two user patterns. The first character represents t… |
| 1.3.6.1.4.1.300.200.2.12 | dlcUnitUserPattern2 | 1 | 1 | This is a sequence of the characters '0' and '1' that represents the second of two user patterns. The first character represents … |
| 1.3.6.1.4.1.300.200.2.13 | dlcUnitBlockAllAlarms | 1 | 1 | When dlcUnitBlockAllAlarms is TRUE, the unit will never send any traps. |
| 1.3.6.1.4.1.300.200.2.14 | dlcUnitDsx1TrapEnableTable | 1 | 15 | A list of traps that are related to a Dsx1 port. |
| 1.3.6.1.4.1.300.200.2.15 | dlcUnitDataDteLossTrapEnableTable | 1 | 3 | Enables or disables a trap upon the loss of signal on a Data DTE port. |
| 1.3.6.1.4.1.300.200.2.16 | dlcUnitExternalAlarmInputTrapEnable | 1 | 1 | Enables or disables a trap upon detection of an alarm condition on the External Alarm Input. |
| 1.3.6.1.4.1.300.200.2.17 | dlcUnitExternalAlarmInputContacts | 1 | 1 | When set to normallyOpen, an alarm is declared when the contacts close ... and vice-versa. |
| 1.3.6.1.4.1.300.200.2.18 | dlcUnitExternalAlarmInputMessage | 1 | 1 | A character string that describes what's going on when an alarm on the External Alarm Input is detected. |
| 1.3.6.1.4.1.300.200.2.19 | dlcUnitExternalAlarmOutputContacts | 1 | 1 | When set to normallyOpen, the contacts close when any enabled alarm occurs and vice-versa. Pushing any button on the units Front P… |
| 1.3.6.1.4.1.300.200.2.20 | dlcUnitExternalAlarmOutputTrapEnable | 1 | 1 | Enables or disables the external alarm output contacts. |
| 1.3.6.1.4.1.300.200.2.21 | dlcUnitDsx1ConfigTable | 1 | 10 | A table of configuration items for a Dsx1 port. |
| 1.3.6.1.4.1.300.200.2.22 | dlcUnitDataDteConfigTable | 1 | 7 | The data DTE configuration table. |
| 1.3.6.1.4.1.300.200.2.23 | dlcUnitMuxConfigTable | 1 | 4 | This is the timeslot map configuration. |
| 1.3.6.1.4.1.300.200.2.24 | dlcUnitSnmpConfig | 13 | 33 | None |
| 1.3.6.1.4.1.300.200.2.25 | dlcUnitConfigTime | 6 | 12 | None |
| 1.3.6.1.4.1.300.200.2.26 | dlcUnitSerialNum | 1 | 1 | An ID that uniquely and globally identifies the unit. A Serial Number must consist of printable ASCII characters 0x20 ..0x7E. |
| 1.3.6.1.4.1.300.200.2.27 | dlcUnitModemConfig | 4 | 8 | None |
| 1.3.6.1.4.1.300.200.2.29 | dlcUnitDialOutTimeInterval | 1 | 1 | A time interval for the dialout. The value should be between 0 and 255. |
| 1.3.6.1.4.1.300.200.2.30 | dlcAlarmSignal | 1 | 1 | Framed/unframed aux alarm signal option |
| 1.3.6.1.4.1.300.200.2.31 | dlcUnitIdleCode | 1 | 1 | Idle Code that is send on unassigned time slots |
| 1.3.6.1.4.1.300.200.2.32 | dlcRemoteCommunicationsMode | 1 | 1 | Framed/unframed aux alarm signal option |
| 1.3.6.1.4.1.300.200.2.33 | dlcUnitConfigLinkTest | 8 | 16 | None |
| 1.3.6.1.4.1.300.200.2.34 | dlcUnitInbandConfig | 1 | 1 | When true (== 2), inband management is enabled. |
| 1.3.6.1.4.1.300.200.2.35 | dlcUnitInbandTrafficType | 1 | 1 | The type of traffic expected on the link for inband management and IPM. |
| 1.3.6.1.4.1.300.200.2.36 | dlcUnitPerformanceMonitoring | 1 | 1 | When true (== 2), the integrated performance monitoring (IPM) is enabled |
| 1.3.6.1.4.1.300.200.2.37 | dlcUnitPvcAutoDiscovery | 1 | 1 | When true (== 2), automatic discovery of DLCIs is enabled |
| 1.3.6.1.4.1.300.200.2.38 | dlcUnitDelayMonitorConfig | 1 | 10 | None |
| 1.3.6.1.4.1.300.200.2.39 | dlcDLCItable | 1 | 5 | Table for current DLCI |
| 1.3.6.1.4.1.300.200.2.41 | dlcLMIConditioningGroup | 2 | 38 | None |
| 1.3.6.1.4.1.300.200.2.42 | dlcInbandDtePort | 1 | 1 | This object configures which DTE port has inband management. |