classA
classB
classC
are UP.
In the case of classC, mfrClassThreshold should be
configured with mfrClass in an atomic set operation.
This variable can be set on a multilink bundle but
not on a uni link bundle.
Parsed from file tiaranet-fr.mib.txt
Company: None
Module: TIARA-FR-MIB
classA
classB
classC
are UP.
In the case of classC, mfrClassThreshold should be
configured with mfrClass in an atomic set operation.
This variable can be set on a multilink bundle but
not on a uni link bundle.
Parsed from file TIARA-FR-MIB.mib
Module: TIARA-FR-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-FR-MIB
[Automatically extracted from oidview.com]
mfrClass OBJECT-TYPE SYNTAX INTEGER { classA(1), classB(2), classC(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "classA classB classC are UP. In the case of classC, mfrClassThreshold should be configured with mfrClass in an atomic set operation. This variable can be set on a multilink bundle but not on a uni link bundle." ::= { frTableEntry 14 }
mfrClass OBJECT-TYPE SYNTAX INTEGER { classA(1), classB(2), classC(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "classA classB classC are UP. In the case of classC, mfrClassThreshold should be configured with mfrClass in an atomic set operation. This variable can be set on a multilink bundle but not on a uni link bundle." ::= { frTableEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.16.1.1.1 | frIfEnable | 0 | 0 | Enables or disables the frame-relay interface. By default frame- relay interface is enabled. Writing zero (0) disables frame-rela… |
| 1.3.6.1.4.1.3174.2.16.1.1.2 | frEnablePvcAll | 0 | 0 | Enables all PVCs related to the interface. By default all PVCs related to an interface are disabled. Writing One (1) enables all … |
| 1.3.6.1.4.1.3174.2.16.1.1.3 | frFrameSize | 0 | 0 | Maximum Size of the frame that will be configured for this Frame Relay interface. The value for frame size ranges from 56 to 4096… |
| 1.3.6.1.4.1.3174.2.16.1.1.4 | frIfType | 0 | 0 | frIftype |
| 1.3.6.1.4.1.3174.2.16.1.1.5 | frLmiType | 0 | 0 | Local management Interface type for the frame-relay interface. It can take any of the following three values: ansi - ANSI T1.617 … |
| 1.3.6.1.4.1.3174.2.16.1.1.6 | frLmiDceN392 | 0 | 0 | DCE/UNI error threshold value. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type… |
| 1.3.6.1.4.1.3174.2.16.1.1.7 | frLmiDceN393 | 0 | 0 | DCE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI ty… |
| 1.3.6.1.4.1.3174.2.16.1.1.8 | frLmiDteN392 | 0 | 0 | DTE/UNI error threshold. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type shoul… |
| 1.3.6.1.4.1.3174.2.16.1.1.9 | frLmiDteN393 | 0 | 0 | DTE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI ty… |
| 1.3.6.1.4.1.3174.2.16.1.1.10 | frLmiDteN391 | 0 | 0 | DTE/UNI full status polling interval. Ranges from 1 to 255, with a default value of 6. To configure the value of this variable, … |
| 1.3.6.1.4.1.3174.2.16.1.1.11 | frLmiKeepalive | 0 | 0 | Local management interface keepalive polling interval time in seconds. The value for this ranges from 5 seconds to 255 seconds wi… |
| 1.3.6.1.4.1.3174.2.16.1.1.12 | mfrAckMsgTimer | 0 | 0 | The time to wait for an ADD_LINK_ACK message before timing out. |
| 1.3.6.1.4.1.3174.2.16.1.1.13 | mfrAckMsgMaxRetry | 0 | 0 | Maximum number of Retries for the Ack Msg. This variable can be set on a multilink bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.15 | mfrClassThreshold | 0 | 0 | Threshold - minimum number of links required to activate bundle, for a mfrClass, classC. This variable can be set on a multilink … |
| 1.3.6.1.4.1.3174.2.16.1.1.16 | mfrFrameSize | 0 | 0 | The frame size for multi-link frame relay. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.17 | mfrHelloTimer | 0 | 0 | Hello timer in seconds. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.18 | mfrSegThreshold | 0 | 0 | Segment threshold packet size in bytes. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.19 | mfrDiffDelay | 0 | 0 | Differential delay in milli seconds. This variable can be set on a multilink bundle but not on a uni link bundle. |