Optional secondary source forwarding address configured
for PVC, using alternate ethernet as backup. This
variable should be configured along with the PVC primary
source forwarding address. To unconfigure the secondary
forwarding address, a set is issued with the value of
the primary source forwarding address as 0.0.0.0, or
a primary source forwarding address is set only, or both
primary and secondary are set to 0.0.0.0
Parsed from file tiaranet-fr.mib.txt
Company: None
Module: TIARA-FR-MIB
Optional secondary source forwarding address configured
for PVC, using alternate ethernet as backup. This
variable should be configured along with the PVC primary
source forwarding address. To unconfigure the secondary
forwarding address, a set is issued with the value of
the primary source forwarding address as 0.0.0.0, or
a primary source forwarding address is set only, or both
primary and secondary are set to 0.0.0.0
Parsed from file TIARA-FR-MIB.mib
Module: TIARA-FR-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-FR-MIB
[Automatically extracted from oidview.com]
frPvcSrcForwardingSecondary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Optional secondary source forwarding address configured for PVC, using alternate ethernet as backup. This variable should be configured along with the PVC primary source forwarding address. To unconfigure the secondary forwarding address, a set is issued with the value of the primary source forwarding address as 0.0.0.0, or a primary source forwarding address is set only, or both primary and secondary are set to 0.0.0.0" ::= { frPvcTableEntry 7}
frPvcSrcForwardingSecondary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Optional secondary source forwarding address configured for PVC, using alternate ethernet as backup. This variable should be configured along with the PVC primary source forwarding address. To unconfigure the secondary forwarding address, a set is issued with the value of the primary source forwarding address as 0.0.0.0, or a primary source forwarding address is set only, or both primary and secondary are set to 0.0.0.0" ::= { frPvcTableEntry 7}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.16.2.1.1 | frPvcDlci | 0 | 0 | Data Link Connection Identifier of the PVC. The value ranges from 16 to 991. The Dlci is unique for a bundle but Dlci numbers can… |
| 1.3.6.1.4.1.3174.2.16.2.1.2 | frPvcEnable | 0 | 0 | Enables PVC for given interface name and DLCI number. By default PVC is disabled. Writing one(1) on this enables PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.3 | frPvcDescr | 0 | 0 | Description for the configured PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.4 | frPvcIpAddr | 0 | 0 | IP address to be configured for the PVC. PVC IP subnet Mask variable should also be configured alongwith this variable. A set on … |
| 1.3.6.1.4.1.3174.2.16.2.1.5 | frPvcIpSubnetMask | 0 | 0 | Subnet mask to be configured alongwith PVC IP address. This variable should be configured alongwith PVC IP address. |
| 1.3.6.1.4.1.3174.2.16.2.1.6 | frPvcSrcForwardingPrimary | 0 | 0 | Source forwarding IP address to be configured for PVC. To unconfigure the source forwarding address, a set is issued with the val… |
| 1.3.6.1.4.1.3174.2.16.2.1.8 | frPvcRemoteIpAddr | 0 | 0 | Remote IP address to be mapped for PVC |
| 1.3.6.1.4.1.3174.2.16.2.1.9 | frPvcPolicingEnable | 0 | 0 | This variable is to disable/enable policing for PVC. Writing zero (0) on this disables policing for the PVC. By default policing … |
| 1.3.6.1.4.1.3174.2.16.2.1.10 | frPvcPolicingDe | 0 | 0 | If enabled, received frames that exceed policing threshold, will be tagged with DE bit. This variable can be configured only if p… |
| 1.3.6.1.4.1.3174.2.16.2.1.11 | frPvcPolicingCir | 0 | 0 | Committed Information Rate( bits per second ) in receive direction for PVC. This variable can be configured only if policing is e… |
| 1.3.6.1.4.1.3174.2.16.2.1.12 | frPvcPolicingBc | 0 | 0 | Committed Burst ( bits ) in receive direction for PVC. This variable can be configured only if policing is enabled. |
| 1.3.6.1.4.1.3174.2.16.2.1.13 | frPvcPolicingBe | 0 | 0 | Excess burst ( bits ) in receive direction for PVC. This variable can be configured only if policing enabled. |
| 1.3.6.1.4.1.3174.2.16.2.1.14 | frPvcShapingCir | 0 | 0 | The committed information rate (in bits per second) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.15 | frPvcShapingBcMax | 0 | 0 | The maximum committed burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.16 | frPvcShapingBcMin | 0 | 0 | The minimum committed burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.17 | frPvcShapingBe | 0 | 0 | The excess burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.18 | frPvcDlciForSwitching | 0 | 0 | Data Link Connection Identifier of the PVC. The value for this variable ranges from 16 to 991. frPvcBundleNameForSwitching should… |
| 1.3.6.1.4.1.3174.2.16.2.1.19 | frPvcBundleNameForSwitching | 0 | 0 | The name of the bundle configured for Switching. |
| 1.3.6.1.4.1.3174.2.16.2.1.20 | frPvcRowStatus | 0 | 0 | To create a row set row status to a value CreateAndGo(4), indexed by bundle Id and the desired dlci number. |