This variable is used to append or insert a given filter
rule to the filter rule set. If 'insert' is the command the
linenumber at which the rule is inserted should be available
in filterRuleSetLineNumber.'If command is 'add' then the line
number should contain the invalid value (OxFFFF).
Incase of 'add' to know the line number at which the filter
rule was added the manager should do a SNMP walk
Parsed from file tiaranet-pf.mib.txt
Company: None
Module: TIARA-PACKETFILTER-MIB
This variable is used to append or insert a given filter
rule to the filter rule set. If 'insert' is the command the
linenumber at which the rule is inserted should be available
in filterRuleSetLineNumber.'If command is 'add' then the line
number should contain the invalid value (OxFFFF).
Incase of 'add' to know the line number at which the filter
rule was added the manager should do a SNMP walk
Parsed from file TIARA-PACKETFILTER-MIB.mib
Module: TIARA-PACKETFILTER-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-PACKETFILTER-MIB
[Automatically extracted from oidview.com]
filterRuleSetConfigure OBJECT-TYPE SYNTAX INTEGER { add(1), insert(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " This variable is used to append or insert a given filter rule to the filter rule set. If 'insert' is the command the linenumber at which the rule is inserted should be available in filterRuleSetLineNumber.'If command is 'add' then the line number should contain the invalid value (OxFFFF). Incase of 'add' to know the line number at which the filter rule was added the manager should do a SNMP walk " ::= { filterRuleSetTableEntry 21 }
filterRuleSetConfigure OBJECT-TYPE SYNTAX INTEGER { add(1), insert(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " This variable is used to append or insert a given filter rule to the filter rule set. If 'insert' is the command the linenumber at which the rule is inserted should be available in filterRuleSetLineNumber.'If command is 'add' then the line number should contain the invalid value (OxFFFF). Incase of 'add' to know the line number at which the filter rule was added the manager should do a SNMP walk " ::= { filterRuleSetTableEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.51.4.1.1 | filterRuleSetLineNo | 0 | 0 | Line Number where the Rule has to be inserted or an invalid number (0XFFFF) when a row has to be appeded |
| 1.3.6.1.4.1.3174.2.51.4.1.2 | filterRuleName | 0 | 0 | A unique name for the filter rule |
| 1.3.6.1.4.1.3174.2.51.4.1.3 | filterRuleSetAction | 0 | 0 | Specifies Action to be taken by the filter when a match occurs to corresponding filter rule |
| 1.3.6.1.4.1.3174.2.51.4.1.4 | filterRuleSetProtocolType | 0 | 0 | where protocol type ip will have value |
| 1.3.6.1.4.1.3174.2.51.4.1.5 | filterRuleSetSrcIpAddr | 0 | 0 | Number of the Source Network |
| 1.3.6.1.4.1.3174.2.51.4.1.6 | filterRuleSetSrcMask | 0 | 0 | Wild card Address to be applied to source Address |
| 1.3.6.1.4.1.3174.2.51.4.1.7 | filterRuleSetDestIpAddr | 0 | 0 | Number of the Destination Network |
| 1.3.6.1.4.1.3174.2.51.4.1.8 | filterRuleSetDestMask | 0 | 0 | Wild card Address to be applied to destination Address |
| 1.3.6.1.4.1.3174.2.51.4.1.9 | filterRuleSetPrecedence | 0 | 0 | Ip address precedence feild can be used to filter packets |
| 1.3.6.1.4.1.3174.2.51.4.1.10 | filterRuleSetTos | 0 | 0 | Ip header TOS feild can be used to filter the packets |
| 1.3.6.1.4.1.3174.2.51.4.1.11 | filterRuleSetIcmpType | 0 | 0 | ICMP message type can be used to filter the packets |
| 1.3.6.1.4.1.3174.2.51.4.1.12 | filterRuleSetIcmpCode | 0 | 0 | ICMP message Code can be used to filter the packets |
| 1.3.6.1.4.1.3174.2.51.4.1.13 | filterRuleSetSrcPortOne | 0 | 0 | Source Port 1 |
| 1.3.6.1.4.1.3174.2.51.4.1.14 | filterRuleSetSrcPortTwo | 0 | 0 | Source Port 2 |
| 1.3.6.1.4.1.3174.2.51.4.1.15 | filterRuleSetDestPortOne | 0 | 0 | Destination Port 1 |
| 1.3.6.1.4.1.3174.2.51.4.1.16 | filterRuleSetDestPortTwo | 0 | 0 | Destination Port 2 |
| 1.3.6.1.4.1.3174.2.51.4.1.17 | filterRuleSetSrcRelationBetnPorts | 0 | 0 | relation between the Source port |
| 1.3.6.1.4.1.3174.2.51.4.1.18 | filterRuleSetDestRelationBetnPorts | 0 | 0 | relation between the Destination ports |
| 1.3.6.1.4.1.3174.2.51.4.1.19 | filterRuleSetTcpFlags | 0 | 0 | TCP flags can be used to filter the packets |
| 1.3.6.1.4.1.3174.2.51.4.1.20 | filterRuleSetLogAction | 0 | 0 | When a rule match occurs a logging message about the packet which the match occured the entry will be logged |
| 1.3.6.1.4.1.3174.2.51.4.1.22 | filterRuleSetTableRowStatus | 0 | 0 | Used to Add or Delete a Row in the table |