Configures the local/remote DCE for loopback
operation. Three DCE loopback modes are available:
line, cable, and remote. Use noTest to abandon any
of the DCE loopbacks. If the DCE is already in any
one of the loopback modes, then noTest must be issued
to abort the current test before initiating another
loopback request. These commands are valid only if
the HSSI adaptor is in DTE mode and it connected
to a DCE.
Parsed from file tiaranet-hssi.mib.txt
Company: None
Module: TIARA-HSSI-MIB
Configures the local/remote DCE for loopback
operation. Three DCE loopback modes are available:
line, cable, and remote. Use noTest to abandon any
of the DCE loopbacks. If the DCE is already in any
one of the loopback modes, then noTest must be issued
to abort the current test before initiating another
loopback request. These commands are valid only if
the HSSI adaptor is in DTE mode and it connected
to a DCE.
Parsed from file TIARA-HSSI-MIB.mib
Module: TIARA-HSSI-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-HSSI-MIB
[Automatically extracted from oidview.com]
hssiDceLoopbackTest OBJECT-TYPE SYNTAX INTEGER { noTest (1), line(2), cable(3), remote(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the local/remote DCE for loopback operation. Three DCE loopback modes are available: line, cable, and remote. Use noTest to abandon any of the DCE loopbacks. If the DCE is already in any one of the loopback modes, then noTest must be issued to abort the current test before initiating another loopback request. These commands are valid only if the HSSI adaptor is in DTE mode and it connected to a DCE." ::= {hssiConfigTableEntry 11}
hssiDceLoopbackTest OBJECT-TYPE SYNTAX INTEGER { noTest (1), line(2), cable(3), remote(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the local/remote DCE for loopback operation. Three DCE loopback modes are available: line, cable, and remote. Use noTest to abandon any of the DCE loopbacks. If the DCE is already in any one of the loopback modes, then noTest must be issued to abort the current test before initiating another loopback request. These commands are valid only if the HSSI adaptor is in DTE mode and it connected to a DCE." ::= {hssiConfigTableEntry 11}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.2.1.1.1 | hssiIfIndex | 0 | 0 | An integer value that is an index in the entries of the ifTable (MIB-II) with a HSSI interface type. |
| 1.3.6.1.4.1.3174.2.7.2.1.1.2 | hssiConfigClockRate | 0 | 0 | Configures the clock rate (in Hertz) for the HSSI interface. |
| 1.3.6.1.4.1.3174.2.7.2.1.1.3 | hssiConfigClockSource | 0 | 0 | Configures the clock source for the HSSI interface to either internal or line. |
| 1.3.6.1.4.1.3174.2.7.2.1.1.4 | hssiConfigTxClockSource | 0 | 0 | Configures the transmit clock source for the HSSI interface to either internal or terminal. This variable is valid only for the H… |
| 1.3.6.1.4.1.3174.2.7.2.1.1.5 | hssiConfigRxClockSource | 0 | 0 | Configures the receive clock source for the HSSI interface to either internal or terminal. This variable is valid only for the HS… |
| 1.3.6.1.4.1.3174.2.7.2.1.1.6 | hssiConfigMode | 0 | 0 | Configures the mode for the HSSI to either DCE or DTE. |
| 1.3.6.1.4.1.3174.2.7.2.1.1.7 | hssiConfigDataMode | 0 | 0 | Configures the data mode for the HSSI interface. This variable is valid only for the HSSI interface on the USSI card. |
| 1.3.6.1.4.1.3174.2.7.2.1.1.8 | hssiConfigCRC | 0 | 0 | Configures the cyclic redundancy check for the HSSI interface to either 16 or 32 bits. |
| 1.3.6.1.4.1.3174.2.7.2.1.1.9 | hssiConfigProcessCtrlSignal | 0 | 0 | Configures the processing of control signals (CA/TA) for the HSSI interface. This variable is valid only for the HSSI interface o… |
| 1.3.6.1.4.1.3174.2.7.2.1.1.10 | hssiDteLoopback | 0 | 0 | Configures the local DTE for loopback operation: TRUE : request local DTE to go into line loopback FALSE : request local DTE to … |