Specifies the status of the V35 alarm. If
the bit is set, it indicates that the alarm
state is on. Alarm bits are mode dependent;
they are interpreted as follows:
v35-alarms-DTR - DTR not received from DTE
(V.35 is DCE)
v35-alarms-DSR - DSR not received from DCE
(V.35 is DTE)
v35-alarms-ST - V.35 adaptor driving ST
(V.35 is DCE)
v35-alarms-CTS - CTS not received from DCE
(V.35 is DTE)
v35-alarms-RTS - RTS not received from DTE
(V.35 is DCE)
Parsed from file tiaranet-v35.mib.txt
Company: None
Module: TIARA-V35-MIB
Specifies the status of the V35 alarm. If
the bit is set, it indicates that the alarm
state is on. Alarm bits are mode dependent;
they are interpreted as follows:
v35-alarms-DTR - DTR not received from DTE
(V.35 is DCE)
v35-alarms-DSR - DSR not received from DCE
(V.35 is DTE)
v35-alarms-ST - V.35 adaptor driving ST
(V.35 is DCE)
v35-alarms-CTS - CTS not received from DCE
(V.35 is DTE)
v35-alarms-RTS - RTS not received from DTE
(V.35 is DCE)
Parsed from file TIARA-V35-MIB.mib
Module: TIARA-V35-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-V35-MIB
[Automatically extracted from oidview.com]
v35StatsAlarmStatus OBJECT-TYPE SYNTAX BITS { v35-no-alarms(0), v35-alarms-DTR(1), v35-alarms-DSR(2), v35-alarms-ST(3), v35-alarms-CTS(4), v35-alarms-RTS(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the status of the V35 alarm. If the bit is set, it indicates that the alarm state is on. Alarm bits are mode dependent; they are interpreted as follows: v35-alarms-DTR - DTR not received from DTE (V.35 is DCE) v35-alarms-DSR - DSR not received from DCE (V.35 is DTE) v35-alarms-ST - V.35 adaptor driving ST (V.35 is DCE) v35-alarms-CTS - CTS not received from DCE (V.35 is DTE) v35-alarms-RTS - RTS not received from DTE (V.35 is DCE) " ::= {v35StatsTableEntry 1}
v35StatsAlarmStatus OBJECT-TYPE SYNTAX BITS { v35-no-alarms(0), v35-alarms-DTR(1), v35-alarms-DSR(2), v35-alarms-ST(3), v35-alarms-CTS(4), v35-alarms-RTS(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the status of the V35 alarm. If the bit is set, it indicates that the alarm state is on. Alarm bits are mode dependent; they are interpreted as follows: v35-alarms-DTR - DTR not received from DTE (V.35 is DCE) v35-alarms-DSR - DSR not received from DCE (V.35 is DTE) v35-alarms-ST - V.35 adaptor driving ST (V.35 is DCE) v35-alarms-CTS - CTS not received from DCE (V.35 is DTE) v35-alarms-RTS - RTS not received from DTE (V.35 is DCE) " ::= {v35StatsTableEntry 1}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.3174.2.7.3.2.1.2 | v35StatsFramesIn | 0 | 0 | Specifies the number of incoming frames. |
1.3.6.1.4.1.3174.2.7.3.2.1.3 | v35StatsFramesOut | 0 | 0 | Specifies the number of outgoing frames. |
1.3.6.1.4.1.3174.2.7.3.2.1.4 | v35StatsOctetsIn | 0 | 0 | Specifies the number of incoming octets. |
1.3.6.1.4.1.3174.2.7.3.2.1.5 | v35StatsOctetsOut | 0 | 0 | Specifies the number of outgoing octets. |
1.3.6.1.4.1.3174.2.7.3.2.1.6 | v35StatsCRCErrors | 0 | 0 | Specifies the number of CRC errors that have been identified so far. |