Reference record for OID 1.3.6.1.4.1.318.1.1.26.6.1.1.4



parent
1.3.6.1.4.1.318.1.1.26.6.1.1 (rPDU2PhaseConfigEntry)
node code
4
node name
rPDU2PhaseConfigOverloadRestriction
dot oid
1.3.6.1.4.1.318.1.1.26.6.1.1.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) apc(318) products(1) hardware(1) rPDU2(26) rPDU2Phase(6) rPDU2PhaseConfigTable(1) rPDU2PhaseConfigEntry(1) rPDU2PhaseConfigOverloadRestriction(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) apc(318) products(1) hardware(1) rPDU2(26) rPDU2Phase(6) rPDU2PhaseConfigTable(1) rPDU2PhaseConfigEntry(1) rPDU2PhaseConfigOverloadRestriction(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) apc(318) products(1) hardware(1) rPDU2(26) rPDU2Phase(6) rPDU2PhaseConfigTable(1) rPDU2PhaseConfigEntry(1) rPDU2PhaseConfigOverloadRestriction(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) apc(318) products(1) hardware(1) rPDU2(26) rPDU2Phase(6) rPDU2PhaseConfigTable(1) rPDU2PhaseConfigEntry(1) rPDU2PhaseConfigOverloadRestriction(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) apc(318) products(1) hardware(1) rPDU2(26) rPDU2Phase(6) rPDU2PhaseConfigTable(1) rPDU2PhaseConfigEntry(1) rPDU2PhaseConfigOverloadRestriction(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) apc(318) products(1) hardware(1) rPDU2(26) rPDU2Phase(6) rPDU2PhaseConfigTable(1) rPDU2PhaseConfigEntry(1) rPDU2PhaseConfigOverloadRestriction(4)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/apc/products/hardware/rPDU2/rPDU2Phase/rPDU2PhaseConfigTable/rPDU2PhaseConfigEntry/rPDU2PhaseConfigOverloadRestriction
  • /iso/identified-organization/dod/internet/private/enterprises/apc/products/hardware/rPDU2/rPDU2Phase/rPDU2PhaseConfigTable/rPDU2PhaseConfigEntry/rPDU2PhaseConfigOverloadRestriction
  • /iso/org/dod/internet/private/enterprise/apc/products/hardware/rPDU2/rPDU2Phase/rPDU2PhaseConfigTable/rPDU2PhaseConfigEntry/rPDU2PhaseConfigOverloadRestriction
  • /iso/org/dod/internet/private/enterprises/apc/products/hardware/rPDU2/rPDU2Phase/rPDU2PhaseConfigTable/rPDU2PhaseConfigEntry/rPDU2PhaseConfigOverloadRestriction
  • /iso/iso-identified-organization/dod/internet/private/enterprise/apc/products/hardware/rPDU2/rPDU2Phase/rPDU2PhaseConfigTable/rPDU2PhaseConfigEntry/rPDU2PhaseConfigOverloadRestriction
  • /iso/iso-identified-organization/dod/internet/private/enterprises/apc/products/hardware/rPDU2/rPDU2Phase/rPDU2PhaseConfigTable/rPDU2PhaseConfigEntry/rPDU2PhaseConfigOverloadRestriction
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/318/1/1/26/6/1/1/4

    Description by mibdepot

    This OID controls the behavior of a Switched Rack PDU
    phase when an overload condition is possible and
    additional outlets are requested to be turned on.

    Setting this OID to alwaysAllowTurnON (1) will always allow
    the outlets on the corresponding phase to turn on.

    Setting this OID to restrictOnNearOverload (2) will not allow
    outlets on the corresponding phase to turn on if the
    rPDULoadConfigNearOverloadThreshold OID is exceeded.

    Setting this OID to restrictOnOverload (3) will not allow
    outlets on the corresponding phase to turn on if the
    rPDULoadConfigOverloadThreshold OID is exceeded.

    Models that do not support this feature will respond to this OID
    with a value of notSupported (4). Attempts to set this OID
    in these models will fail.

    Parsed from file powernet.mib.txt
    Company: None
    Module: PowerNet-MIB

    Description by circitor

    This OID controls the behavior of a Switched Rack PDU
    phase when an overload condition is possible and
    additional outlets are requested to be turned on.

    Setting this OID to alwaysAllowTurnON (1) will always allow
    the outlets on the corresponding phase to turn on.

    Setting this OID to restrictOnNearOverload (2) will not allow
    outlets on the corresponding phase to turn on if the
    rPDULoadConfigNearOverloadThreshold OID is exceeded.

    Setting this OID to restrictOnOverload (3) will not allow
    outlets on the corresponding phase to turn on if the
    rPDULoadConfigOverloadThreshold OID is exceeded.

    Models that do not support this feature will respond to this OID
    with a value of notSupported (4). Attempts to set this OID
    in these models will fail.

    Parsed from file PowerNet-MIB.mib
    Module: PowerNet-MIB

    Information by mibdepot

    rPDU2PhaseConfigOverloadRestriction OBJECT-TYPE
   SYNTAX INTEGER       {
      alwaysAllowTurnON         (1),
      restrictOnNearOverload    (2),
      restrictOnOverload        (3),
      notSupported              (4)
   }
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
      "This OID controls the behavior of a Switched Rack PDU 
       phase when an overload condition is possible and 
       additional outlets are requested to be turned on. 

       Setting this OID to alwaysAllowTurnON (1) will always allow 
       the outlets on the corresponding phase to turn on.
       
       Setting this OID to restrictOnNearOverload (2) will not allow 
       outlets on the corresponding phase to turn on if the 
       rPDULoadConfigNearOverloadThreshold OID is exceeded.
              
       Setting this OID to restrictOnOverload (3) will not allow
       outlets on the corresponding phase to turn on if the 
       rPDULoadConfigOverloadThreshold OID is exceeded.

       Models that do not support this feature will respond to this OID
       with a value of notSupported (4). Attempts to set this OID
       in these models will fail."
   ::= { rPDU2PhaseConfigEntry 4 }

    Information by oid_info

    Vendor: APC
    Module: PowerNet-MIB (powernet401.mib)
    Type: TABULAR
    Access: read-write
    Syntax: INTEGER

    Automatically extracted from www.mibdepot.com

    Information by circitor

    rPDU2PhaseConfigOverloadRestriction OBJECT-TYPE
   SYNTAX INTEGER       {
      alwaysAllowTurnON         (1),
      restrictOnNearOverload    (2),
      restrictOnOverload        (3),
      notSupported              (4)
   }
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
      "This OID controls the behavior of a Switched Rack PDU 
       phase when an overload condition is possible and 
       additional outlets are requested to be turned on. 

       Setting this OID to alwaysAllowTurnON (1) will always allow 
       the outlets on the corresponding phase to turn on.
       
       Setting this OID to restrictOnNearOverload (2) will not allow 
       outlets on the corresponding phase to turn on if the 
       rPDULoadConfigNearOverloadThreshold OID is exceeded.
              
       Setting this OID to restrictOnOverload (3) will not allow
       outlets on the corresponding phase to turn on if the 
       rPDULoadConfigOverloadThreshold OID is exceeded.

       Models that do not support this feature will respond to this OID
       with a value of notSupported (4). Attempts to set this OID
       in these models will fail."
   ::= { rPDU2PhaseConfigEntry 4 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.318)

    Yoest Peter C.

    Brothers (7)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.318.1.1.26.6.1.1.1 rPDU2PhaseConfigIndex 0 0 The index to the Rack PDU phase configuration
    table entry
    1.3.6.1.4.1.318.1.1.26.6.1.1.2 rPDU2PhaseConfigModule 0 0 The user-defined Rack PDU numeric ID
    1.3.6.1.4.1.318.1.1.26.6.1.1.3 rPDU2PhaseConfigNumber 0 0 The numeric phase ID
    1.3.6.1.4.1.318.1.1.26.6.1.1.5 rPDU2PhaseConfigLowLoadCurrentThreshold 0 0 User-defined low load phase current
    threshold in Amps
    1.3.6.1.4.1.318.1.1.26.6.1.1.6 rPDU2PhaseConfigNearOverloadCurrentThreshold 0 0 User-defined near phase overload warning
    threshold in Amps
    1.3.6.1.4.1.318.1.1.26.6.1.1.7 rPDU2PhaseConfigOverloadCurrentThreshold 0 0 User-defined phase overload current
    threshold in Amps
    1.3.6.1.4.1.318.1.1.26.6.1.1.8 rPDU2PhaseConfigPhasePeakCurrentReset 0 0 Setting this OID to reset (2) will cause the existing peak current value
    to be replaced by the present load current value.

    Gettin…