The reading for sensor 6.
If the input is digital, the reading will be 1 (active) or
0 (inactive)
Parsed from file Falconmib.txt
Company: None
Module: RLE-FALCON-MIB
The reading for sensor 6.
If the input is digital, the reading will be 1 (active) or
0 (inactive)
Parsed from file RLE-FALCON-MIB.mib
Module: RLE-FALCON-MIB
Vendor: Raymond and Lae Engineering, Inc.
Module: RLE-FALCON-MIB
[Automatically extracted from oidview.com]
FalconInput6Reading OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The reading for sensor 6. If the input is digital, the reading will be 1 (active) or 0 (inactive)" ::= { FalconInput6 2 }
falconInput6Reading OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The reading for sensor 6. If the input is digital, the reading will be 1 (active) or 0 (inactive)" ::= { falconInput6 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3184.1.1.1.3.6.2.0 | 0 | 0 | 0 | FalconInput6Reading |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3184.1.1.1.3.6.1 | FalconInput6State | 1 | 1 | The state of use of Input Number 6. When a sensor is connected to Input 6 set State to installed(2) to indicate that the value of… |
| 1.3.6.1.4.1.3184.1.1.1.3.6.3 | FalconInput6Gain | 1 | 1 | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 6 to… |
| 1.3.6.1.4.1.3184.1.1.1.3.6.4 | FalconInput6Offset | 1 | 1 | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 6 to … |
| 1.3.6.1.4.1.3184.1.1.1.3.6.5 | FalconInput6Label | 1 | 1 | A user-defined text string associated with Input Number 6. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.3184.1.1.1.3.6.6 | FalconInput6UOM | 1 | 1 | A user-defined text string associated with Input Number 6. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.3184.1.1.1.3.6.7 | FalconInput6HighLimit2 | 1 | 1 | When input 6 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 6. The HighLimit v… |
| 1.3.6.1.4.1.3184.1.1.1.3.6.8 | FalconInput6HighLimit | 1 | 1 | When input 6 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 6. The HighLimit v… |
| 1.3.6.1.4.1.3184.1.1.1.3.6.9 | FalconInput6LowLimit | 1 | 1 | When input 6 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 6. The LowLimit… |
| 1.3.6.1.4.1.3184.1.1.1.3.6.10 | FalconInput6LowLimit2 | 1 | 1 | When input 6 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 6. The LowLimit… |
| 1.3.6.1.4.1.3184.1.1.1.3.6.11 | FalconInput6RlyControl | 1 | 1 | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, … |
| 1.3.6.1.4.1.3184.1.1.1.3.6.12 | FalconInput6Delay | 1 | 1 | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This varia… |
| 1.3.6.1.4.1.3184.1.1.1.3.6.13 | FalconInput6Hysteresis | 1 | 1 | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will cle… |