The SPI for incoming packets
Parsed from file ns-vpn-mon.mib.txt
Company: None
Module: NETSCREEN-VPN-MON-MIB
The SPI for incoming packets
Parsed from file NETSCREEN-VPN-MON-MIB.mib
Module: NETSCREEN-VPN-MON-MIB
Vendor: NetScreen Technologies, Inc.
Module: NETSCREEN-VPN-MON-MIB
[Automatically extracted from oidview.com]
nsVpnMonInSpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The SPI for incoming packets " ::= { nsVpnMonEntry 18 }
nsVpnMonInSpi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SPI for incoming packets" ::= { nsVpnMonEntry 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.3224.4.1.1.1.1 | nsVpnMonIndex | 0 | 0 | A unique value for each active VPN tunnel. Its value ranges between 1 and 65535 and may not be contigous. Due to the dynamic nat… |
1.3.6.1.4.1.3224.4.1.1.1.2 | nsVpnMonInPlyId | 0 | 0 | The incoming policy ID for which this tunnel is created for. -1 means no policy associates with this SA. |
1.3.6.1.4.1.3224.4.1.1.1.3 | nsVpnMonOutPlyId | 0 | 0 | The outgoing policy ID for which this tunnel is created for. -1 means no policy associates with this SA. |
1.3.6.1.4.1.3224.4.1.1.1.4 | nsVpnMonVpnName | 0 | 0 | A textual string contains information about the VPN entity from which this tunnel was derived. |
1.3.6.1.4.1.3224.4.1.1.1.5 | nsVpnMonVsysName | 0 | 0 | A textual string contains the Virtual system to which this tunnel belongs. |
1.3.6.1.4.1.3224.4.1.1.1.6 | nsVpnMonTunnelType | 0 | 0 | Protocol type used for the tunnel |
1.3.6.1.4.1.3224.4.1.1.1.7 | nsVpnMonEspEncAlg | 0 | 0 | a value which identifies a particular algorithm to be used to provide secrecy protection for ESP. |
1.3.6.1.4.1.3224.4.1.1.1.8 | nsVpnMonEspAuthAlg | 0 | 0 | The ESP Authentication Algorithm used in the IPsec. |
1.3.6.1.4.1.3224.4.1.1.1.9 | nsVpnMonAhAlg | 0 | 0 | a value which identifies a particular algorithm to be used to provide integrity protection for AH. |
1.3.6.1.4.1.3224.4.1.1.1.10 | nsVpnMonKeyType | 0 | 0 | a value which identifies a key exchange protocol to be used for the negotiation |
1.3.6.1.4.1.3224.4.1.1.1.11 | nsVpnMonP1Auth | 0 | 0 | a value which identifies Phase 1 authentication method |
1.3.6.1.4.1.3224.4.1.1.1.12 | nsVpnMonVpnType | 0 | 0 | The type of this VPN tunnel, either a dialup or site-to-site |
1.3.6.1.4.1.3224.4.1.1.1.13 | nsVpnMonRmtGwIp | 0 | 0 | The peer Gateway's IP address |
1.3.6.1.4.1.3224.4.1.1.1.14 | nsVpnMonRmtGwId | 0 | 0 | The peer Gateway's ID |
1.3.6.1.4.1.3224.4.1.1.1.15 | nsVpnMonMyGwIp | 0 | 0 | The local Gateway's IP address |
1.3.6.1.4.1.3224.4.1.1.1.16 | nsVpnMonMyGwId | 0 | 0 | The local Gateway's ID |
1.3.6.1.4.1.3224.4.1.1.1.17 | nsVpnMonOutSpi | 0 | 0 | The SPI for outgoing packets |
1.3.6.1.4.1.3224.4.1.1.1.19 | nsVpnMonMonState | 0 | 0 | The monitoring status, if it is on, an icmp ping will be sent over the tunnel periodically to test the conntivity and latency |
1.3.6.1.4.1.3224.4.1.1.1.20 | nsVpnMonTunnelState | 0 | 0 | The current tunnel status determined by the icmp ping if The monitoring status is on. |
1.3.6.1.4.1.3224.4.1.1.1.21 | nsVpnMonP1State | 0 | 0 | The IKE's Phase 1 status |
1.3.6.1.4.1.3224.4.1.1.1.22 | nsVpnMonP1LifeTime | 0 | 0 | an active Phase 1 sa's time left before re-key. -1 means unlimited lifetime. |
1.3.6.1.4.1.3224.4.1.1.1.23 | nsVpnMonP2State | 0 | 0 | The IKE's Phase 2 status |
1.3.6.1.4.1.3224.4.1.1.1.24 | nsVpnMonP2LifeTime | 0 | 0 | an active Phase 2 sa's time left before re-key. -1 means unlimited life time. |
1.3.6.1.4.1.3224.4.1.1.1.25 | nsVpnMonP2LifeBytes | 0 | 0 | an active Phase 2 sa's bytes left before re-key. -1 means unlimited life bytes. |
1.3.6.1.4.1.3224.4.1.1.1.26 | nsVpnMonDelayAvg | 0 | 0 | a kind of rolling average of latency, in milliseconds. -1 has no meaning here, which means nsVpnMonDelayAvg has not been calculat… |
1.3.6.1.4.1.3224.4.1.1.1.27 | nsVpnMonDelayLast | 0 | 0 | latency in last sample, in milliseconds. -1 means either vpn tunnel is inactive or vpn tunnel monitor is not turned on. |
1.3.6.1.4.1.3224.4.1.1.1.28 | nsVpnMonAvail | 0 | 0 | percentage over 30 samples |
1.3.6.1.4.1.3224.4.1.1.1.29 | nsVpnMonSaId | 0 | 0 | SA identifier, also used as table index |
1.3.6.1.4.1.3224.4.1.1.1.30 | nsVpnMonGroupId | 0 | 0 | Group Identifier |
1.3.6.1.4.1.3224.4.1.1.1.31 | nsVpnMonUsrId | 0 | 0 | User Identifier |
1.3.6.1.4.1.3224.4.1.1.1.32 | nsVpnMonStartSessRequestTime | 0 | 0 | Start Session request timestamp |
1.3.6.1.4.1.3224.4.1.1.1.33 | nsVpnMonStartSessEstTime | 0 | 0 | Start Session establish timestamp |
1.3.6.1.4.1.3224.4.1.1.1.34 | nsVpnMonEndSessTime | 0 | 0 | End Session timestamp [when session terminates] |
1.3.6.1.4.1.3224.4.1.1.1.35 | nsVpnMonBytesIn | 0 | 0 | Incoming bytes through this sa. |
1.3.6.1.4.1.3224.4.1.1.1.36 | nsVpnMonBytesOut | 0 | 0 | Outgoing bytes through this sa. |
1.3.6.1.4.1.3224.4.1.1.1.37 | nsVpnMonPacketsIn | 0 | 0 | Incoming packets through this sa. |
1.3.6.1.4.1.3224.4.1.1.1.38 | nsVpnMonPacketsOut | 0 | 0 | Outgoing packets through this sa. |
1.3.6.1.4.1.3224.4.1.1.1.39 | nsVpnMonIfIndex | 0 | 0 | interface index. |
1.3.6.1.4.1.3224.4.1.1.1.40 | nsVpnMonUpdateTime | 0 | 0 | Timestamp [Whenever any member of the row gets updated, the timestamp is updated] |
1.3.6.1.4.1.3224.4.1.1.1.41 | nsVpnMonDN | 0 | 0 | DN name |
1.3.6.1.4.1.3224.4.1.1.1.42 | nsVpnMonIfInfo | 0 | 0 | Internal id assigned to this interface. Stays persistent across resets. |