| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.1 |
tsPortIndex | 0 | 0 |
The port number. Each port is identified by a unique
number. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.2 |
tsPortRcvLocalFrames | 0 | 0 |
Number of frames received where the destination is on this port. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.3 |
tsPortForwardedFrames | 0 | 0 |
Number of frames received on this port and forwarded to
another port or the system module for processing. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.4 |
tsPortMostStations | 0 | 0 |
Highest number of stations ever active at any
time since the last reset of the switch as seen by
this port. This includes the def… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.5 |
tsPortMaxStations | 0 | 0 |
Maximum number of stations which the port can
support simultaneously. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.6 |
tsPortSWHandledFrames | 0 | 0 |
Number of Frames received on this port and
delivered to the system module for processing. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.7 |
tsPortLocalStations | 0 | 0 |
Number of stations on this port's address table
which belong to the segment attached to this port. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.8 |
tsPortRemoteStations | 0 | 0 |
Number of stations on this port's address table
which belong to segments attached to other ports. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.9 |
tsPortUnknownStaFrames | 0 | 0 |
Number of unicast frames received on this port
and forwarded to the system module for processing
because the source or destinatio… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.10 |
tsPortResetStats | 0 | 0 |
Setting this object to reset(3) causes all
traffic counters for this port to be set to zero.
Also the value of tsPortResetTimer i… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.11 |
tsPortResetTimer | 0 | 0 |
Time (in 100th second ticks) since the port
counters were reset. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.12 |
tsPortResetAddrs | 0 | 0 |
Setting this object to reset(3) clears all
address table entries for this port as well as
setting all port traffic counters to ze… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.13 |
tsPortRcvBcasts | 0 | 0 |
Number of Broadcast Frames received on this port
without errors. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.14 |
tsPortSwitchedFrames | 0 | 0 |
Number of frames switched on this port |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.15 |
tsPortLinkState | 0 | 0 |
Link state of the port. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.16 |
tsPortHashOverflows | 0 | 0 |
Number of times a hash bucket was full when trying to
add an entry to the port address table. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.17 |
tsPortAddrAgingTime | 0 | 0 |
Port level address aging time. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.18 |
tsPortSwitchMode | 0 | 0 |
Configured frame switching mode for the port. When
in adaptive mode the port uses the Direct Cut algorithm
to place the port in e… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.19 |
tsPortFixedCfg | 0 | 0 |
Use fixed configuration or run auto detection
to determine configuration. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.20 |
tsPortMode | 0 | 0 |
When read, this object indicates the Port Mode
obtained by the auto-detect function. It is a
valid read object only when TsPortF… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.21 |
tsPortDuplex | 0 | 0 |
This object is related to the dtrMac MIB objects
cPortProtocolCharCurrentAccessProtocol
and cPortProtocolCharAccessProtcolMask
as … |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.22 |
tsPortCfgLoss | 0 | 0 |
Number of events as described in TsPortCfgLossRC
after the port has completed the join process and
then lost communication. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.23 |
tsPortCfgLossRC | 0 | 0 |
Reason code describing the cause of configuration loss. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.24 |
tsPortCRCCount | 0 | 0 |
Number of frames received with CRC error.
This object is equivalent to dot5StatsLineError and to the
dtrMac MIB object txiStatsLi… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.25 |
tsPortHPChannelFrames | 0 | 0 |
Number of frames sent to the high priority channel
of the particular Token-Ring port. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.26 |
tsPortLPChannelFrames | 0 | 0 |
Number of frames sent to the low priority channel
of the particular Token-Ring port. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.27 |
tsPortHPThreshold | 0 | 0 |
Priority level at which frames are sent to the High
priority channel. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.28 |
tsPortCfgRingSpeed | 0 | 0 |
When read this object indicates the Port Ring Speed
obtained by the RSA function.
Write to this object when defining the Port Rin… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.29 |
tsPortCfgRSA | 0 | 0 |
User configured Ring Speed Adjust or fixed speed. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.30 |
tsPortDomain | 0 | 0 |
Domain that the port belongs to. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.32 |
tsPortCfgLossSamplingPeriod | 0 | 0 |
The sampling period, in minutes, for which the port
monitors to see if the configuration loss threshold has
been exceeeded.
Valid … |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.33 |
tsPortBeaconStationAddress | 0 | 0 |
MAC address of the Station last generating a beacon MAC frame.
This information is present for the generation of a trap and
shoul… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.34 |
tsPortBeaconNAUN | 0 | 0 |
MAC address of the NAUN station last generating a beacon MAC frame.
This information is present for the generation of a trap and
… |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.35 |
tsPortBeaconType | 0 | 0 |
The type of Beacon which last occurred. Values are the same
as for the Beacon Type subvector and are defined as follows:
X'0001' … |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.36 |
tsPortIfIndex | 0 | 0 |
The ifIndex associated with the port. |
| 1.3.6.1.4.1.326.2.8.1.2.2.1.1.37 |
tsPortOperSwitchMode | 0 | 0 |
Operational frame switching mode for the port. When
in adaptive mode the port uses the Direct Cut algorithm
to place the port in … |