| 1.3.6.1.4.1.343.2.2.1.10.1.1 |
portChassisIndex | 0 | 0 |
Chassis number in stack. This object refers to the first number in the example below.
Example: portChassisIndex.1.1.9 The first nu… |
| 1.3.6.1.4.1.343.2.2.1.10.1.2 |
portModuleIndex | 0 | 0 |
Module number in the chassis. This object refers to the second number in the example below.
Example: portModuleIndex.1.1.9 The fir… |
| 1.3.6.1.4.1.343.2.2.1.10.1.4 |
portType | 0 | 0 |
Displays the selected port's capabilities. internalHalfDuplex is the expansion module's internal connection to a port in the hub… |
| 1.3.6.1.4.1.343.2.2.1.10.1.5 |
portAdminStatus | 0 | 0 |
Enables or disables the selected port. Disabled ports will not be able to establish a link to a device. Disabled ports remain dis… |
| 1.3.6.1.4.1.343.2.2.1.10.1.6 |
portOperStatus | 0 | 0 |
Displays the current link status of the port. Operational means a port has established a link to a device. Notoperational means t… |
| 1.3.6.1.4.1.343.2.2.1.10.1.7 |
portJabber | 0 | 0 |
Jabber state of the port. Failure means the device attached to the port caused the hub's jabber lock-up protection to turn on. Ch… |
| 1.3.6.1.4.1.343.2.2.1.10.1.8 |
portLinkPartnerInfo | 0 | 0 |
Bitfield used by SNMP application. |
| 1.3.6.1.4.1.343.2.2.1.10.1.9 |
portLEDInfo | 0 | 0 |
Bitfield used by SNMP application. |
| 1.3.6.1.4.1.343.2.2.1.10.1.10 |
portTimeSinceLastLinkChange | 0 | 0 |
Time since the last link status change. |
| 1.3.6.1.4.1.343.2.2.1.10.1.11 |
portAllCountersReset | 0 | 0 |
Resets all counters for ports to zero. This includes all traffic statistics (packet count, etc.) and error counts. |
| 1.3.6.1.4.1.343.2.2.1.10.1.12 |
portReset | 0 | 0 |
Reset the port at the media level. |
| 1.3.6.1.4.1.343.2.2.1.10.1.13 |
portLastErrorID | 0 | 0 |
Type of last error that occurred on the port since the last link status change. badPhy is a hardware problem with the hub port. p… |
| 1.3.6.1.4.1.343.2.2.1.10.1.14 |
portSegmentAdminMode | 0 | 0 |
For ports that have the ability to be set independent of the hub or module they reside in, this object allows setting the port to… |
| 1.3.6.1.4.1.343.2.2.1.10.1.15 |
portSegmentOperStatus | 0 | 0 |
Reports the port's segment assignment. 'none' indicates the port has a portSegmentAdminMode of 'auto' and has not negotiated a li… |
| 1.3.6.1.4.1.343.2.2.1.10.1.16 |
portLinkSpeed | 0 | 0 |
The operational speed of this port when linked. Ports which do not have a link report 'none'. |
| 1.3.6.1.4.1.343.2.2.1.10.1.17 |
portSecureAdminMode | 0 | 0 |
Causes a port to be administratively disabled if an un-authorized MAC address is detected as having transmitted a frame into this… |
| 1.3.6.1.4.1.343.2.2.1.10.1.18 |
portSecureMAC | 0 | 0 |
Specifies the authorized MAC address for this port if portSecureAdminMode is set to portSecurityOn. |
| 1.3.6.1.4.1.343.2.2.1.10.1.19 |
portLinkTestState | 0 | 0 |
The current setting of link test function for the port. When disable, a port will no longer be disconnected due to link fail. Wh… |
| 1.3.6.1.4.1.343.2.2.1.10.1.20 |
portLinkTestStatusTrapCtrl | 0 | 0 |
This object indicates whether a trap should be generated when the link state changes. |
| 1.3.6.1.4.1.343.2.2.1.10.1.21 |
portSpeedStatusTrapCtrl | 0 | 0 |
This object indicates whether a trap should be generated when the speed status changes. |
| 1.3.6.1.4.1.343.2.2.1.10.1.22 |
portPolarityStatus | 0 | 0 |
The current polarity status of this port. |