Status in source: current.
Names: eltIfDot1qCustomEgressEtherType
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eltIfDot1qCustomEgressEtherType",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The Dot1qEtherType allow administrator to select a non-standard (other than 0x8100) 2-byte ethertype for the interface to interoperate with third party vendor's system that do not use the standard 0x8100 ethertype to identify 802.1q-tagged frames. The current administrative value of the 802.1q ethertype for the interface. The administrative 802.1q ethertype value may differ from the operational 802.1q ethertype value. On some platforms, 802.1q ethertype may be assigned per group rather than per port. If multiple ports belong to a port group, the 802.1q ethertype assigned to any of the ports in such group will apply to all ports in the same group. To configure non-standard dot1q egress ethertype is only recommended when the Eltex device is connected to any third party vendor device.\"",
"::=",
"{",
"eltIfDot1qCustomEgressEtherTypeEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Dot1qEtherType allow administrator to select a non-standard (other than 0x8100) 2-byte ethertype for the interface to interoperate with third party vendor's system that do not use the standard 0x8100 ethertype to identify 802.1q-tagged frames. The current administrative value of the 802.1q ethertype for the interface. The administrative 802.1q ethertype value may differ from the operational 802.1q ethertype value. On some platforms, 802.1q ethertype may be assigned per group rather than per port. If multiple ports belong to a port group, the 802.1q ethertype assigned to any of the ports in such group will apply to all ports in the same group. To configure non-standard dot1q egress ethertype is only recommended when the Eltex device is connected to any third party vendor device."
],
null,
null,
null,
null
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: ELTEX-MES-IF-EXTENSION-MIB
See published definition above
Module imports
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex'], 'ELTEX-MES-MNG-MIB': ['eltMesIfExtensionMIB']}
· Download ELTEX-MES-IF-EXTENSION-MIB
Related source files and packages: