Number of consecutive end-to-end F5 OAM loopback
cell responses that must be received in order to
change a PVC state to up. Does not apply to SVCs.
Parsed from file stn-atm.mib.txt
Company: None
Module: STN-ATM-MIB
Number of consecutive end-to-end F5 OAM loopback
cell responses that must be received in order to
change a PVC state to up. Does not apply to SVCs.
Parsed from file STN-ATM-MIB.mib
Module: STN-ATM-MIB
Vendor: Spring Tide Networks, Inc.
Module: STN-ATM-MIB
[Automatically extracted from oidview.com]
stnVcLinkOAMRetryUpCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC state to up. Does not apply to SVCs." DEFVAL { 3 } ::= { stnVcLinkEntry 16 }
stnVcLinkOAMRetryUpCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC state to up. Does not apply to SVCs." DEFVAL { 3 } ::= { stnVcLinkEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.1 | stnVcLinkIfIndex | 0 | 0 | The interface index represents a connection point on the switch fabric from a module or line card. It is calculated based on the … |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.2 | stnVcLinkVpi | 0 | 0 | The VPI value of the VPL. Note that the VPI=0 is not used for a VPL not associated with a VCL. The maximum VPI value cannot excee… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.3 | stnVcLinkVci | 0 | 0 | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits. |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.4 | stnVcLinkRcvTrafDescr | 0 | 0 | Receive traffic descriptor identifier for this VPL. |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.5 | stnVcLinkXmtTrafDescr | 0 | 0 | Transmit traffic descriptor identifier for this VPL. |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.6 | stnVcLinkAalObjectsValid | 0 | 0 | Indicates whether the following AAL objects are valid (whether the local VCL end-point is also the VCC end-point). Transmit traff… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.7 | stnVcLinkAalType | 0 | 0 | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL is in use. The type of AAL… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.8 | stnVcLinkAal5XmtSDUSize | 0 | 0 | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AA… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.9 | stnVcLinkAal5RcvSDUSize | 0 | 0 | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum A… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.10 | stnVcLinkAal5EncapsType | 0 | 0 | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of d… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.11 | stnVcLinkCastType | 0 | 0 | The type of topology of a connection (point- to-point, point-to-multipoint). In the case of point-to-multipoint, the orientation o… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.12 | stnVcLinkConnKind | 0 | 0 | The use of call control. An spvcInitiator is always cross-connected to an svcOutgoing, and an spvcTarget is always cross-connect… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.13 | stnVcLinkAccEnabled | 0 | 0 | ATM accounting is enabled for this VC Link. |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.14 | stnVcLinkOAMMgmtEnabled | 0 | 0 | OAM management is enabled. |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.15 | stnVcLinkOAMXmtFrequency | 0 | 0 | Number of seconds between transmitting OAM loopback cells. |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.17 | stnVcLinkOAMRetryDownCount | 0 | 0 | Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down or t… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.18 | stnVcLinkOAMRetryFrequency | 0 | 0 | The frequency (in seconds) that end-to-end F5 loopback cells should be transmitted when a change in UP/DOWN state is being verifi… |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.19 | stnVcLinkPppId | 0 | 0 | PPP ID |
| 1.3.6.1.4.1.3551.2.6.1.1.1.1.1.20 | stnVcLinkOperStatus | 0 | 0 | Operational status of the VC Link. |