Operational status of the Port.
Parsed from file stn-atm.mib.txt
Company: None
Module: STN-ATM-MIB
Operational status of the Port.
Parsed from file STN-ATM-MIB.mib
Module: STN-ATM-MIB
Vendor: Spring Tide Networks, Inc.
Module: STN-ATM-MIB
[Automatically extracted from oidview.com]
stnAtmPortOperStatus OBJECT-TYPE SYNTAX AtmPortOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the Port." ::= { stnAtmPortAttrEntry 26 }
stnAtmPortOperStatus OBJECT-TYPE SYNTAX AtmPortOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the Port." ::= { stnAtmPortAttrEntry 26 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.1 | stnAtmPortIfIndex | 0 | 0 | The interface index represents a connection point on the switch fabric from a module or line card. It is calculated based on the … |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.2 | stnAtmPortIfType | 0 | 0 | stnAtmPortIftype |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.3 | stnAtmPortIfState | 0 | 0 | The interface state of the connection point to the switch fabric. Values are: not-present(0), detected(1), configured(2), up-non-red… |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.4 | stnAtmPortEnabled | 0 | 0 | Whether the ATM port is enabled. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.5 | stnAtmPortMinVccVpi | 0 | 0 | Minimum VPI used for Virtual Channel Circuits. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.6 | stnAtmPortMaxVccVpi | 0 | 0 | Maximum VPI used for Virtual Channel Circuits. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.7 | stnAtmPortMinVccVci | 0 | 0 | Minimum VCI used for Virtual Channel Circuits. To avoid clashes with the reserved ATM VCI values (such as 5 for signaling and any… |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.8 | stnAtmPortMaxVccVci | 0 | 0 | Maximum VCI used for Virtual Channel Circuits. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.9 | stnAtmPortMinVpcVpi | 0 | 0 | Minimum VPI used for Virtual Path Circuits. To avoid clashes with the reserved ATM VCCs values (such as 5 for signaling and any o… |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.10 | stnAtmPortMaxVpcVpi | 0 | 0 | Maximum VCI used for Virtual Channel Circuits. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.11 | stnAtmPortMaxActivePaths | 0 | 0 | The maximum number of active paths that can be active at any time on this port. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.12 | stnAtmPortMaxActiveChannels | 0 | 0 | The maximum number of virtual channels that can be active at any time on this port. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.13 | stnAtmPortPVCAddress | 0 | 0 | The default configured PVC address information (20-byte NSAP address). |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.14 | stnAtmPortSVCAddress | 0 | 0 | The default configured SVC address information (20-byte NSAP address). |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.15 | stnAtmPortSigVpi | 0 | 0 | The VPI used for the signaling channel. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.16 | stnAtmPortSigVci | 0 | 0 | The VCI used for the signaling channel. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.17 | stnAtmPortSigEnabled | 0 | 0 | Indicates if port will have a signaling stack. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.18 | stnAtmPortIlmiVpi | 0 | 0 | The VPI used for ILMI channel. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.19 | stnAtmPortIlmiVci | 0 | 0 | The VCI used for ILMI channel. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.20 | stnAtmPortIlmiEnabled | 0 | 0 | Indicates if port will use ILMI. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.21 | stnAtmPortOamManagementEnabled | 0 | 0 | Indicates if port is using OAM Management Procedures. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.22 | stnAtmPortOamXmtFrequency | 0 | 0 | Indicates Frequency of OAM Transmit Cells. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.23 | stnAtmPortOamRetryUpCount | 0 | 0 | Indicates OAM Cell Retry Up Count value. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.24 | stnAtmPortOamRetryDownCount | 0 | 0 | Indicates OAM Cell Retry Down Count value. |
1.3.6.1.4.1.3551.2.6.1.4.1.1.1.25 | stnAtmPortOamRetryFrequency | 0 | 0 | Indicates OAM Retry Frequency value. |