16 bit field. The following are bits relative positions (0=LSB), and the trap ID associated to each alarm state.
0. Ethernet Loss of Signal (-LOS) (metropolisEthLosAlarm)
Parsed from file ChrComIfEthernetoverATMIfTable.mib.txt
Company: chromatis
Module: ChrComIfEthernetoverATMIfTable-MIB
Vendor: Chromatis Networks Inc.
Module: ChrComIfEthernetoverATMIftable-MIB
[Automatically extracted from oidview.com]
chrComIfEthernetAlarmVector OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "16 bit field. The following are bits relative positions (0=LSB), and the trap ID associated to each alarm state. 0. Ethernet Loss of Signal (-LOS) (metropolisEthLosAlarm) " ::= { chrComIfEthernetoverATMIfTableEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.3695.1.2.5.3.1.1 | chrComIfEthernetIfIndex | 0 | 0 | Index referring to the interface table |
1.3.6.1.4.1.3695.1.2.5.3.1.2 | chrComIfEthernetELMIndex | 0 | 0 | ELM index within card (up to 2 ELMs per card; current card has only 1) |
1.3.6.1.4.1.3695.1.2.5.3.1.3 | chrComIfEthernetEthernetIfType | 0 | 0 | chrComIfEthernetEthernetIftype |
1.3.6.1.4.1.3695.1.2.5.3.1.4 | chrComIfEthernetPortEnable | 0 | 0 | Specifies if port is enabled or disabled. Ingress and egress traffic for this card is dropped if disabled |
1.3.6.1.4.1.3695.1.2.5.3.1.5 | chrComIfEthernetAutoNegSpeed | 0 | 0 | Defines if autonegotiation is allowed for Speed |
1.3.6.1.4.1.3695.1.2.5.3.1.6 | chrComIfEthernetAutoNegDuplexMode | 0 | 0 | Defines if autonegotiation is allowed for DuplexMode |
1.3.6.1.4.1.3695.1.2.5.3.1.7 | chrComIfEthernetAutoNegEnFlowControl | 0 | 0 | Defines if autonegotiation is allowed for En-Flow-Control |
1.3.6.1.4.1.3695.1.2.5.3.1.8 | chrComIfEthernetSpeed | 0 | 0 | Speed |
1.3.6.1.4.1.3695.1.2.5.3.1.9 | chrComIfEthernetDuplexMode | 0 | 0 | Duplex Mode (Half/Full) |
1.3.6.1.4.1.3695.1.2.5.3.1.10 | chrComIfEthernetEnFlowControl | 0 | 0 | Defines if 802.3x Flow Control is enabled |
1.3.6.1.4.1.3695.1.2.5.3.1.11 | chrComIfEthernetEnBackpressure | 0 | 0 | Defines if backpressure is enabled in half-duplex mode |
1.3.6.1.4.1.3695.1.2.5.3.1.12 | chrComIfEthernetLpgID | 0 | 0 | ID of Local Port Group (LPG) within the ELM that this port belongs to |
1.3.6.1.4.1.3695.1.2.5.3.1.13 | chrComIfEthernetLvmID | 0 | 0 | ID of Local VLAN Member (LVM) within the ELM that this port belongs to |
1.3.6.1.4.1.3695.1.2.5.3.1.15 | chrComIfEthernetAlarmSeverityProfileIndex | 0 | 0 | None |