mgmtRxSynthtrapControl
View at oid-info.com
This persistent variable controls whether the Agent will
attempt to send the 'rxSynthTrap' trap whenever the
Radio has a transition of its receiver-sythesizer alarm
condition.
The 'rxSynthTrap' trap is defined in this MIB definition file.
'no-trap' indicates that the NMU, should not generate any
SNMP trap on any transition. This is the default value.
'send-trap-on-alarm-transition' indicates that the NMU will
only generate a SNMP trap on the transition to the 'alarm'
state.
'send-trap-on-normal-transition' indicates that the NMU
will only generate a SNMP trap on the transition to the
'normal' state.
'send-trap-on-both-transitions' indicates that the NMU will
generate a SNMP trap on any transition.
Whenever the SNMP Agent attempts to send the 'rxSynthTrap'
trap, other checks described below may prohibit this trap
from transmission.
Whenever this variable prohibits a trap from being sent,
then 'trapFilteredSpecific' will be incremented.
This MIB variable is the first of four checks that the NMU
Agent uses to filter traps, based upon 1) a specific
enable or disable control variable; 2) 'trapControl' which
offers a gross on/off/limit control; 3) 'trapMgrTable'
with 'trapMgrControl' and 'trapMgrAddress' which filters
whether enterprise traps (such as this trap) and/or
standard (RFC 1215) traps are sent to each specific trap
manager; and 4) 'trapSeverityFilter' which filters traps
according to a controlling severity variable for the
specific trap, which in this case is described below, and
is defined as 'mgmRxSynthSeverity'.
Whenever any of these trap filters cause a trap to be
filtered, the corresponding MIB statistic is incremented.
These statistics are 'trapFilteredSpecific',
'trapFilteredControl', 'trapFilteredManager', and
'trapFilteredSeverity'.
See the MIB descriptions (in this file, and in
'westmux.mib' file) for any of these above variables for
details.
Parsed from file WESTERN-MULTIPLEX-RAD10006-MIB.mib
Module: WESTERN-MULTIPLEX-RAD10006-MIB
Vendor: Western Multiplex
Module: WESTERN-MULTIPLEX-RAD10006-MIB
[Automatically extracted from oidview.com]
mgmtRxSynthTrapControl OBJECT-TYPE SYNTAX INTEGER { no-trap(1), send-trap-on-alarm-transition(2), send-trap-on-normal-transition(3), send-trap-on-both-transitions(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This persistent variable controls whether the Agent will attempt to send the 'rxSynthTrap' trap whenever the Radio has a transition of its receiver-sythesizer alarm condition. The 'rxSynthTrap' trap is defined in this MIB definition file. 'no-trap' indicates that the NMU, should not generate any SNMP trap on any transition. This is the default value. 'send-trap-on-alarm-transition' indicates that the NMU will only generate a SNMP trap on the transition to the 'alarm' state. 'send-trap-on-normal-transition' indicates that the NMU will only generate a SNMP trap on the transition to the 'normal' state. 'send-trap-on-both-transitions' indicates that the NMU will generate a SNMP trap on any transition. Whenever the SNMP Agent attempts to send the 'rxSynthTrap' trap, other checks described below may prohibit this trap from transmission. Whenever this variable prohibits a trap from being sent, then 'trapFilteredSpecific' will be incremented. This MIB variable is the first of four checks that the NMU Agent uses to filter traps, based upon 1) a specific enable or disable control variable; 2) 'trapControl' which offers a gross on/off/limit control; 3) 'trapMgrTable' with 'trapMgrControl' and 'trapMgrAddress' which filters whether enterprise traps (such as this trap) and/or standard (RFC 1215) traps are sent to each specific trap manager; and 4) 'trapSeverityFilter' which filters traps according to a controlling severity variable for the specific trap, which in this case is described below, and is defined as 'mgmRxSynthSeverity'. Whenever any of these trap filters cause a trap to be filtered, the corresponding MIB statistic is incremented. These statistics are 'trapFilteredSpecific', 'trapFilteredControl', 'trapFilteredManager', and 'trapFilteredSeverity'. See the MIB descriptions (in this file, and in 'westmux.mib' file) for any of these above variables for details." ::= { mgmt 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3727.20.20.3.1 | mgmtNMULinkTrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 'nmuLinkTrap' trap whenever the link condition betwe… |
| 1.3.6.1.4.1.3727.20.20.3.2 | mgmtNMULinkSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.3 | mgmtT1InputTrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 't1InTrap' trap whenever the Radio has a transition … |
| 1.3.6.1.4.1.3727.20.20.3.4 | mgmtT1InputSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.5 | mgmtT1CodeViolationTrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 't1CvTrap' trap whenever the Radio has a transition … |
| 1.3.6.1.4.1.3727.20.20.3.6 | mgmtT1CodeViolationSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.7 | mgmtT1LineDriverTrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 't1LoTrap' trap whenever the radio has a transition … |
| 1.3.6.1.4.1.3727.20.20.3.8 | mgmtT1LineDriverSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.9 | mgmtT1AISTrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 't1AisTrap' trap whenever the radio has a transition… |
| 1.3.6.1.4.1.3727.20.20.3.10 | mgmtT1AISSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.11 | mgmtRadioSyncTrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 'radioSyncTrap' trap whenever the Radio has a transi… |
| 1.3.6.1.4.1.3727.20.20.3.12 | mgmtRadioSyncSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.13 | mgmtBitErrorTrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 'berTrap' trap whenever the Radio has a transition o… |
| 1.3.6.1.4.1.3727.20.20.3.14 | mgmtBitErrorSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.15 | mgmtFan1TrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 'fan1Trap' trap whenever the FAN 1 Unit has a transi… |
| 1.3.6.1.4.1.3727.20.20.3.16 | mgmtFan1Severity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.17 | mgmtFan2TrapControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to send the 'fan2Trap' trap whenever the FAN2 Unit has a transit… |
| 1.3.6.1.4.1.3727.20.20.3.18 | mgmtFan2Severity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.20 | mgmtRxSynthSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.21 | mgmtTxSynthTrapControl | 0 | 0 | mgmtTxSynthtrapControl |
| 1.3.6.1.4.1.3727.20.20.3.22 | mgmtTxSynthSeverity | 0 | 0 | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record t… |
| 1.3.6.1.4.1.3727.20.20.3.61 | mgmtTrapHysteresis | 0 | 0 | This persistent variable indicates the desired hysteresis time value that allows the trap management sub-system to generate any o… |