Number of seconds to flash identifying LED.
Write here to flash LED on device if
supported by Gateway and device. Zero
turns LED off.
Parsed from file ADIC-SANMGR-PROXY-MIB.mib
Module: ADIC-SANMGR-PROXY-MIB
pdIdentify OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds to flash identifying LED. Write here to flash LED on device if supported by Gateway and device. Zero turns LED off." ::= { pdDevEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.1 | pdIndex | 0 | 0 | MIB table index |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.2 | pdUID | 0 | 0 | Universal Identifier |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.3 | pdType | 0 | 0 | Device Type i.e. disk/tape/cd etc. |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.4 | pdVendor | 0 | 0 | Device Vendor |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.5 | pdProduct | 0 | 0 | Device Product Identifier |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.6 | pdBlockSize | 0 | 0 | Block size in Bytes |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.7 | pdCapacity | 0 | 0 | Capacity in BLOCKS (see pdBlockSize) |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.8 | pdAccess | 0 | 0 | None |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.9 | pdRemovable | 0 | 0 | Is device removable ? |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.10 | pdStatus | 0 | 0 | Device Status |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.11 | pdSpeed | 0 | 0 | Device Speed in MBytes/second |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.12 | pdWidth | 0 | 0 | Data path width in bits |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.13 | pdSerial | 0 | 0 | Device Serial Number |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.15 | pdInterfaceType | 0 | 0 | This device's type of communication interface. |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.16 | pdBus | 0 | 0 | SCSI bus number |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.17 | pdId | 0 | 0 | SCSI Address ID |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.18 | pdLun | 0 | 0 | SCSI Logical Unit Number. |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.19 | pdCtlrIndex | 0 | 0 | Index of this device's controller in the Controllers MIB table and type-specific controller tables |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.20 | pdHWRev | 0 | 0 | Device hardware revision number/identifier |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.21 | pdFWRev | 0 | 0 | Device firmware revision number/identifier |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.22 | pdReset | 0 | 0 | Generic device reset if supported. Write reset(1) here to reset device if supported by Gateway firmware and device. |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.23 | pdStatusBits | 0 | 0 | Device status bits as per SCSI spec. |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.24 | pdScsiAnsiLevel | 0 | 0 | Device SCSI level. |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.25 | pdTargetLun | 0 | 0 | This target device's Logical Unit Number as seen from attached host. |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.26 | pdIpAddress | 0 | 0 | This target device's IP Address if applicable. In case of SAN Gateway or Router, this information is used to allow arbitrary dril… |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.27 | pdAltVendor | 0 | 0 | Device alternate Vendor |
1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.28 | pdAltProduct | 0 | 0 | Device alternate Product Identifier |