OID reference
1.3.6.1.4.1.3902.1004.4.1.2.1.12
This configuration parameter defines the line states the ATU-C may autonomously transition to on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) with following definition: Bit 0 L3 state (Idle state) Bit 1 L1/L2 state (Low power state).
Identification
{1 3 6 1 4 1 3902 1004 4 1 2 1 12}
| Bit position | Name |
|---|---|
| 0 | idle |
| 1 | lowPower |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: adslLineConfProfileEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3902.1004.4.1.2.1.12
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
zxAdslAtucConfPMMode OBJECT-TYPE
SYNTAX BITS {
idle (0),
lowPower(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This configuration parameter defines the line states the ATU-C
may autonomously transition to on this line. It is coded in a
bit map representation (0 if not allowed, 1 if allowed) with
following definition:
Bit 0 L3 state (Idle state)
Bit 1 L1/L2 state (Low power state)."
REFERENCE "Section 7.3.1.1.4 ITU G.997.1(05/2003) "
::= { zxAdslLineConfProfileExtEntry 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This configuration parameter defines the line states the ATU-C may autonomously transition to on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) with following definition: Bit 0 L3 state (Idle state) Bit 1 L1/L2 state (Low power state).
ZTE MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: zxAdslAtucConfPMMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zxAdslAtucConfPMMode",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"idle",
"(",
"0",
")",
",",
"lowPower",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\" This configuration parameter defines the line states the ATU-C may autonomously transition to on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) with following definition: Bit 0 L3 state (Idle state) Bit 1 L1/L2 state (Low power state).\"",
"REFERENCE",
"\"Section 7.3.1.1.4 ITU G.997.1(05/2003) \"",
"::=",
"{",
"zxAdslLineConfProfileExtEntry",
"12",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"idle",
0
],
[
"lowPower",
1
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This configuration parameter defines the line states the ATU-C may autonomously transition to on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) with following definition: Bit 0 L3 state (Idle state) Bit 1 L1/L2 state (Low power state)."
],
[
"REFERENCE",
"Section 7.3.1.1.4 ITU G.997.1(05/2003)"
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. ZTE support.
Module: ZTE-DSL-LINE-EXT-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'TimeTicks', 'Counter32', 'Gauge32'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'ADSL-LINE-MIB': ['adslLineConfProfileName', 'adslLineConfProfileEntry', 'adslLineAlarmConfProfileEntry'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration