OID reference
1.3.6.1.4.1.3902.1004.4.1.2.1.15
PM configuration parameter,related to the L2 low power state. This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB to 31 dB.
Identification
{1 3 6 1 4 1 3902 1004 4 1 2 1 15}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: adslLineConfProfileEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3902.1004.4.1.2.1.15
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
zxAdslAtucConfPML2ATPR OBJECT-TYPE
SYNTAX INTEGER (0..31)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" PM configuration parameter,related to the L2 low power state.
This parameter represents the Maximum Aggregate Transmit Power
Reduction (in dB) that can be performed through a single Power
Trim in the L2 state. It ranges from 0 dB to 31 dB."
REFERENCE "Section 7.3.1.1.3 ITU G.997.1(05/2003) "
::= { zxAdslLineConfProfileExtEntry 15 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
PM configuration parameter,related to the L2 low power state. This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB to 31 dB.
ZTE MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: zxAdslAtucConfPML2ATPR
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zxAdslAtucConfPML2ATPR",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"31",
")",
"UNITS",
[
"literal",
"22644222"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\" PM configuration parameter,related to the L2 low power state. This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB to 31 dB.\"",
"REFERENCE",
"\"Section 7.3.1.1.3 ITU G.997.1(05/2003) \"",
"::=",
"{",
"zxAdslLineConfProfileExtEntry",
"15",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
31
]
]
]
],
[
"UNITS",
"dB"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"PM configuration parameter,related to the L2 low power state. This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB to 31 dB."
],
[
"REFERENCE",
"Section 7.3.1.1.3 ITU G.997.1(05/2003)"
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. ZTE support.
Module: ZTE-DSL-LINE-EXT-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'TimeTicks', 'Counter32', 'Gauge32'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'ADSL-LINE-MIB': ['adslLineConfProfileName', 'adslLineConfProfileEntry', 'adslLineAlarmConfProfileEntry'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration