GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission.
Sources for this description
ZTE MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.3902.1015.1000.1.23.1.6
GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission.
Identification
{1 3 6 1 4 1 3902 1015 1000 1 23 1 6}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3902.1015.1000.1.23.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
zxAnAtucChanPerfCurr1DRtxUcDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission."
::= { zxAnAdslAtucChanPerfDataEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission.
ZTE MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: zxAnAtucChanPerfCurr1DRtxUcDtu
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zxAnAtucChanPerfCurr1DRtxUcDtu",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission.\"",
"::=",
"{",
"zxAnAdslAtucChanPerfDataEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. ZTE support.
Module: ZTE-AN-ADSL-LINE-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'TimeTicks', 'Counter32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'ADSL-LINE-MIB': ['adslLineConfProfileName', 'adslLineConfProfileEntry', 'adslLineAlarmConfProfileEntry', 'adslAtucChanConfInterleaveMaxTxRate', 'adslAtucChanCurrTxRate', 'adslAturChanConfInterleaveMaxTxRate', 'adslAturChanCurrTxRate', 'adslAtucChanIntervalEntry', 'adslAturChanIntervalEntry'], 'ZTE-AN-TC-MIB': ['zxAn'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.1 | zxAnAtucChanPerfCurr15RtxDtu | 0 | 0 | |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.2 | zxAnAtucChanPerfCurr15RtxCDtu | 0 | 0 | |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.3 | zxAnAtucChanPerfCurr15RtxUcDtu | 0 | 0 | |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.4 | zxAnAtucChanPerfCurr1DRtxDtu | 0 | 0 | |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.5 | zxAnAtucChanPerfCurr1DRtxCDtu | 0 | 0 |