OID reference

dot3EponFecMode

1.3.6.1.4.1.3902.1015.1010.1.4.1.1.3

Description

An object that defines the mode of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2, and reflects its state. A GET operation returns the current mode of operation of the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) val…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.3902.1015.1010.1.4.1.1 (dot3EponFecEntry)
Node code
3
Node name
dot3EponFecMode
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.3902.1015.1010.1.4.1.1.3
URN notation
urn:oid:1.3.6.1.4.1.3902.1015.1010.1.4.1.1.3
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 3902 1015 1010 1 4 1 1 3}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) zte(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) zte(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) zxEnterpriseMib(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) zxEnterpriseMib(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) zte(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) zte(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) zxEnterpriseMib(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) zxEnterpriseMib(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) zte(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) zte(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) zxEnterpriseMib(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) zxEnterpriseMib(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) zte(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) zte(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) zxEnterpriseMib(3902) zxAn(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) zxEnterpriseMib(3902) msag(1015) zxAnPonMib(1010) zxAnEponMib(1) dot3EponFecObjects(4) dot3EponFecTable(1) dot3EponFecEntry(1) dot3EponFecMode(3)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/3902/1015/1010/1/4/1/1/3
  • /ISO/Identified-Organization/6/1/4/1/3902/1015/1010/1/4/1/1/3
  • /ISO/3/6/1/4/1/3902/1015/1010/1/4/1/1/3
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/3902/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprise/3902/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprise/zte/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprise/zte/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprise/zxEnterpriseMib/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprise/zxEnterpriseMib/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprises/3902/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprises/3902/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprises/zte/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprises/zte/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprises/zxEnterpriseMib/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/enterprises/zxEnterpriseMib/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/3902/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/3902/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/zte/zxAn/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/zte/msag/zxAnPonMib/zxAnEponMib/dot3EponFecObjects/dot3EponFecTable/dot3EponFecEntry/dot3EponFecMode
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
unknown

Enumerated values

ValueName
1unknown
2disabled
3enabled

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: ifIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3902.1015.1010.1.4.1.1.3

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

dot3EponFecMode OBJECT-TYPE 
        SYNTAX       INTEGER{ 
                     unknown (1), 
                     disabled (2), 
                     enabled (3)
                     }                         
        MAX-ACCESS   read-write 
        STATUS       current 
        DESCRIPTION
            "An object that defines the mode of operation of the optional FEC sublayer 
             of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2, and reflects 
             its state. A GET operation returns the current mode of operation of the PHY. 
             A SET operation changes the mode of operation of the PHY to the indicated 
             value. unknown(1) value is assigned in initialization, for non FEC support 
             state or type not yet known. disabled(2) value is assigned when the FEC 
             sublayer is operating in disabled mode. enabled(3) value is assigned when 
             the FEC sublayer is operating in FEC mode. The write operation is not 
             restricted in this document and can be done at any time. Changing dot3EponFecMode 
             state can lead to disabling the Forward error correction on the respective 
             interface which can lead to a degradation of the optical link and therefore 
             may lead to an interruption of service of the users connected to the 
             respective EPON interface. This object is applicable for an OLT and an ONU. 
             At the OLT it has a distinct value for each virtual interface. The counting 
             of the FEC counters will stop when the FEC of the interface is disabled. 
             The counters: dot3EponFecPCSCodingViolation - not affected by FEC mode. 
             dot3EponFecCorrectedBlocks - stops counting when Rx_FEC is not enabled. 
             (unknown (1) and disabled (2)). dot3EponFecUncorrectableBlocks - stops 
             counting when Rx_FEC is not enabled (unknown (1) and disabled (2)). 
             dot3EponFecBufferHeadCodingViolation - stops counting when Rx_FEC 
             is not enabled (unknown (1) and disabled (2)). The object: dot3EponFecAbility 
             - indicates the FEC ability and it is not affected by the dot3EponFecMode object."
        DEFVAL { unknown }
        ::= { dot3EponFecEntry 3 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

An object that defines the mode of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2, and reflects its state. A GET operation returns the current mode of operation of the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) value is assigned in initialization, for non FEC support state or type not yet known. disabled(2) value is assigned when the FEC sublayer is operating in disabled mode. enabled(3) value is assigned when the FEC sublayer is operating in FEC mode. The write operation is not restricted in this document and can be done at any time. Changing dot3EponFecMode state can lead to disabling the Forward error correction on the respective interface which can lead to a degradation of the optical link and therefore may lead to an interruption of service of the users connected to the respective EPON interface. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface. The counting of the FEC counters will stop when the FEC of the interface is disabled. The counters: dot3EponFecPCSCodingViolation - not affected by FEC mode. dot3EponFecCorrectedBlocks - stops counting when Rx_FEC is not enabled. (unknown (1) and disabled (2)). dot3EponFecUncorrectableBlocks - stops counting when Rx_FEC is not enabled (unknown (1) and disabled (2)). dot3EponFecBufferHeadCodingViolation - stops counting when Rx_FEC is not enabled (unknown (1) and disabled (2)). The object: dot3EponFecAbility - indicates the FEC ability and it is not affected by the dot3EponFecMode object.

Sources for this description

ZTE MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1ZTE MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

dot3EponFecMode · currentZTE MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: dot3EponFecMode

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3EponFecMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "unknown",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "enabled",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"An object that defines the mode of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2, and reflects its state. A GET operation returns the current mode of operation of the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) value is assigned in initialization, for non FEC support state or type not yet known. disabled(2) value is assigned when the FEC sublayer is operating in disabled mode. enabled(3) value is assigned when the FEC sublayer is operating in FEC mode. The write operation is not restricted in this document and can be done at any time. Changing dot3EponFecMode state can lead to disabling the Forward error correction on the respective interface which can lead to a degradation of the optical link and therefore may lead to an interruption of service of the users connected to the respective EPON interface. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface. The counting of the FEC counters will stop when the FEC of the interface is disabled. The counters: dot3EponFecPCSCodingViolation - not affected by FEC mode. dot3EponFecCorrectedBlocks - stops counting when Rx_FEC is not enabled. (unknown (1) and disabled (2)). dot3EponFecUncorrectableBlocks - stops counting when Rx_FEC is not enabled (unknown (1) and disabled (2)). dot3EponFecBufferHeadCodingViolation - stops counting when Rx_FEC is not enabled (unknown (1) and disabled (2)). The object: dot3EponFecAbility - indicates the FEC ability and it is not affected by the dot3EponFecMode object.\"",
    "DEFVAL",
    "{",
    "unknown",
    "}",
    "::=",
    "{",
    "dot3EponFecEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "unknown",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "enabled",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "An object that defines the mode of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2, and reflects its state. A GET operation returns the current mode of operation of the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) value is assigned in initialization, for non FEC support state or type not yet known. disabled(2) value is assigned when the FEC sublayer is operating in disabled mode. enabled(3) value is assigned when the FEC sublayer is operating in FEC mode. The write operation is not restricted in this document and can be done at any time. Changing dot3EponFecMode state can lead to disabling the Forward error correction on the respective interface which can lead to a degradation of the optical link and therefore may lead to an interruption of service of the users connected to the respective EPON interface. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface. The counting of the FEC counters will stop when the FEC of the interface is disabled. The counters: dot3EponFecPCSCodingViolation - not affected by FEC mode. dot3EponFecCorrectedBlocks - stops counting when Rx_FEC is not enabled. (unknown (1) and disabled (2)). dot3EponFecUncorrectableBlocks - stops counting when Rx_FEC is not enabled (unknown (1) and disabled (2)). dot3EponFecBufferHeadCodingViolation - stops counting when Rx_FEC is not enabled (unknown (1) and disabled (2)). The object: dot3EponFecAbility - indicates the FEC ability and it is not affected by the dot3EponFecMode object."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "unknown"
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.3902)

Xianlin Luo

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.3902.1015.1010.1.4.1.1.1 dot3EponFecPCSCodingViolation00
1.3.6.1.4.1.3902.1015.1010.1.4.1.1.2 dot3EponFecAbility00
1.3.6.1.4.1.3902.1015.1010.1.4.1.1.4 dot3EponFecCorrectedBlocks00
1.3.6.1.4.1.3902.1015.1010.1.4.1.1.5 dot3EponFecUncorrectableBlocks00
1.3.6.1.4.1.3902.1015.1010.1.4.1.1.6 dot3EponFecBufferHeadCodingViolation00