OID reference
1.3.6.1.4.1.3902.1015.16.1.2.1.4
For zxAnBfdStdSessType of multiHopUnidirectionalLinks(4), this object specifies whether this BFD session is running in active(2) mode or passive(3) mode. For all other BFD zxAnBfdStdSessType BFD sessions, none(1) MUST be specified.
Identification
{1 3 6 1 4 1 3902 1015 16 1 2 1 4}
| Value | Name |
|---|---|
| 1 | none |
| 2 | active |
| 3 | passive |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: zxAnBfdStdSessIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.3902.1015.16.1.2.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
zxAnBfdStdSessMHopUniLinkMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
active(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For zxAnBfdStdSessType of multiHopUnidirectionalLinks(4), this
object specifies whether this BFD session is running in
active(2) mode or passive(3) mode. For all other BFD
zxAnBfdStdSessType BFD sessions, none(1) MUST be specified."
REFERENCE
"draft-ietf-bfd-multihop-09, Section 3.3"
::= { zxAnBfdStdSessEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
For zxAnBfdStdSessType of multiHopUnidirectionalLinks(4), this object specifies whether this BFD session is running in active(2) mode or passive(3) mode. For all other BFD zxAnBfdStdSessType BFD sessions, none(1) MUST be specified.
ZTE MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: zxAnBfdStdSessMHopUniLinkMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zxAnBfdStdSessMHopUniLinkMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"1",
")",
",",
"active",
"(",
"2",
")",
",",
"passive",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"For zxAnBfdStdSessType of multiHopUnidirectionalLinks(4), this object specifies whether this BFD session is running in active(2) mode or passive(3) mode. For all other BFD zxAnBfdStdSessType BFD sessions, none(1) MUST be specified.\"",
"REFERENCE",
"\"draft-ietf-bfd-multihop-09, Section 3.3\"",
"::=",
"{",
"zxAnBfdStdSessEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
1
],
[
"active",
2
],
[
"passive",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"For zxAnBfdStdSessType of multiHopUnidirectionalLinks(4), this object specifies whether this BFD session is running in active(2) mode or passive(3) mode. For all other BFD zxAnBfdStdSessType BFD sessions, none(1) MUST be specified."
],
[
"REFERENCE",
"draft-ietf-bfd-multihop-09, Section 3.3"
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. ZTE support.
Module: ZTE-AN-BFD-STD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'ZTE-AN-TC-MIB': ['zxAn'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Registration