This object will be used to set up the timeout for the TFTP
retries. The default would be 12 sec and the maximum
allowed timeout would be 30 sec.
Parsed from file NMC-MIB.mib.txt
Company: None
Module: NMC-MIB
This object will be used to set up the timeout for the TFTP
retries. The default would be 12 sec and the maximum
allowed timeout would be 30 sec.
Parsed from file NMC-MIB.mib
Module: NMC-MIB
Vendor: UTStarcom Incorporated
Module: NMC-MIB
[Automatically extracted from oidview.com]
nmcCfgTFTPTimeout OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "This object will be used to set up the timeout for the TFTP retries. The default would be 12 sec and the maximum allowed timeout would be 30 sec." ::= { nmcCfg 21 }
nmcCfgTFTPTimeout OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "This object will be used to set up the timeout for the TFTP retries. The default would be 12 sec and the maximum allowed timeout would be 30 sec." ::= { nmcCfg 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.1.21.0 | nmcCfgTFTPTimeout | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.2.1.1 | nmcCfgSystemTime | 1 | 1 | This parameter is used to set and read the current time as kept by the NMC's real-time clock. It should be set to the local time… |
| 1.3.6.1.4.1.429.1.2.1.2 | nmcCfgSystemDate | 1 | 1 | This parameter is used to set and read the current date as kept by the NMC's real-time clock. It should be set to the local date… |
| 1.3.6.1.4.1.429.1.2.1.3 | nmcGmtime | 1 | 1 | This object reflects the current time in Greenwich Mean Time (GMT). The value of this object is sent in USR's enterprise specifi… |
| 1.3.6.1.4.1.429.1.2.1.4 | nmcTimezone | 1 | 1 | This object should be set to reflect the timezone in which the chassis is physically located. It is used in the conversion from … |
| 1.3.6.1.4.1.429.1.2.1.5 | nmcCfgAuthFailTrapEnable | 1 | 1 | This object indicates whether or not the SNMP Proxy Agent running in the Network Management Card is to send a trap upon reception… |
| 1.3.6.1.4.1.429.1.2.1.6 | nmcDaySavingTime | 1 | 1 | The value of this object determines whether or not the NMC will honor daylight savings time when converting from local time to Gr… |
| 1.3.6.1.4.1.429.1.2.1.7 | nmcCfgWanDialOutPhoneNum | 1 | 1 | This is the phone number that the NMC will use to dial a modem that is connected to the WAN port if there is no existing connecti… |
| 1.3.6.1.4.1.429.1.2.1.8 | nmcCfgAtString | 1 | 1 | This object is the user defined AT string that will be used to configure a modem connected to the NMC's WAN port if the NMC needs… |
| 1.3.6.1.4.1.429.1.2.1.9 | nmcPowerUpAutoCfgEnable | 1 | 1 | This parameter defines whether or not to automatically configure cards when they are inserted into the chassis or when the chassi… |
| 1.3.6.1.4.1.429.1.2.1.10 | nmcCfgNumWanRetries | 1 | 1 | This will specify the number of attempts to be made by port_write_task() to send the packet out of the WAN port while doing a dia… |
| 1.3.6.1.4.1.429.1.2.1.11 | nmcCfgWanRetryPause | 1 | 1 | The amount of time in seconds that the NMC will pause between attempts to transmit a packet. The default value for this object is… |
| 1.3.6.1.4.1.429.1.2.1.12 | nmcCfgWanRetrySuspendTime | 1 | 1 | The Time period in seconds for which the WAN port should suspend its attempts to send out the packet. This time period applies wh… |
| 1.3.6.1.4.1.429.1.2.1.13 | nmcCfgNumFailBefSuspend | 1 | 1 | The number of connection failures to allow before suspending retries. |
| 1.3.6.1.4.1.429.1.2.1.14 | nmcCfgLogSrvrSelect | 1 | 1 | The server selection for event logging. Default=none(3). |
| 1.3.6.1.4.1.429.1.2.1.15 | nmcCfgLogPriSrvrAddr | 1 | 1 | The primary logging server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.16 | nmcCfgLogSecSrvrAddr | 1 | 1 | The secondary logging server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.17 | nmcCfgLogUdpPortNum | 1 | 1 | The logging server's UDP port number. Default=1646. |
| 1.3.6.1.4.1.429.1.2.1.18 | nmcCfgLogRetryCnt | 1 | 1 | The NMC logging client transmission retry count. Default=3. |
| 1.3.6.1.4.1.429.1.2.1.19 | nmcCfgLogCallStatGrpSel | 1 | 1 | The optional call statistics groups included in log messages. Groups are Usage(1), Data Transfer(2), Performance(3), Operating M… |
| 1.3.6.1.4.1.429.1.2.1.20 | nmcCfgLogMD5Calc | 1 | 1 | This Optional Object will indicate to the accounting Client whether to calculate MD5 for accounting request message or not. defau… |
| 1.3.6.1.4.1.429.1.2.1.22 | nmcCfgDnsPriSrvrAddr | 1 | 1 | The primary DNS server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.23 | nmcCfgDnsSecSrvrAddr | 1 | 1 | The secondary DNS server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.24 | nmcCfgLog3SrvrAddr | 1 | 1 | The third backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.25 | nmcCfgLog4SrvrAddr | 1 | 1 | The fourth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.26 | nmcCfgLog5SrvrAddr | 1 | 1 | The fifth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.27 | nmcCfgLog6SrvrAddr | 1 | 1 | The sixth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.28 | nmcCfgLog7SrvrAddr | 1 | 1 | The seventh backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.29 | nmcCfgLog8SrvrAddr | 1 | 1 | The eighth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.30 | nmcCfgLogSrvrName | 1 | 1 | The host name of the logging server. Used to resolve logging server IP addresses through DNS query requests from the resolver. |
| 1.3.6.1.4.1.429.1.2.1.31 | nmcCfgDnsRetryCnt | 1 | 1 | The maximum number of retries that will be attempted to query a DNS before trying the secondary DNS. |
| 1.3.6.1.4.1.429.1.2.1.32 | nmcCfgDnsUdpPortNum | 1 | 1 | The logging server's UDP port number. Default=53. |
| 1.3.6.1.4.1.429.1.2.1.33 | nmcCfgDnsSrvrSelect | 1 | 1 | The server selection for DNS. Default=none(1). |
| 1.3.6.1.4.1.429.1.2.1.34 | nmcCfgLogDnsEna | 1 | 1 | Indicates whether logging server host address DNS resolution is enabled or disabled. Disabled, the logging server addresses are t… |
| 1.3.6.1.4.1.429.1.2.1.35 | nmcCfgLogStatusInterval | 1 | 1 | This value defines the interval in seconds between Status-Server requests for a failed RADIUS Accounting server connection. Defaul… |
| 1.3.6.1.4.1.429.1.2.1.36 | nmcCfgDnsSrvrFailure | 1 | 1 | This value defines the failure reason for last failure of DNS resolver query. |
| 1.3.6.1.4.1.429.1.2.1.37 | nmcCfgLogSrvrFailure | 1 | 1 | This value defines the failure reason for the last failure of RADIUS accounting server access. |
| 1.3.6.1.4.1.429.1.2.1.38 | nmcCfgSessionIDNewFmt | 1 | 1 | This Object is used to Enable/Disable the New Session ID Format. Default is Disable. |
| 1.3.6.1.4.1.429.1.2.1.39 | nmcCfgPersistentState | 1 | 1 | When set to enable this object requires the NMC apply the most recently saved NAC operational states from the NMC NVRAM to the NA… |
| 1.3.6.1.4.1.429.1.2.1.40 | nmcCfgHistIntervalTimer | 1 | 1 | This object sets the timer for the history interval in minutes. Default = 15. |
| 1.3.6.1.4.1.429.1.2.1.41 | nmcCfgAlignHistToRTC | 1 | 1 | This object is used to enable aligning history intervals to the system time. Default = disable. |