Call control parameters for an ISDN modem. These define
the sequence of operation related to how a call is
negotiated.
Parsed from file HDM.MIB.txt
Company: cai
Module: HDM-MIB
Vendor: 3Com
Module: HDM-MIB (HDM.MIB)
Type: ENTRY
Access: not-accessible
Syntax: HdmICcEntry
Automatically extracted from www.mibdepot.com
hdmICcEntry OBJECT-TYPE SYNTAX HdmICcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Call control parameters for an ISDN modem. These define the sequence of operation related to how a call is negotiated." INDEX { hdmICcIndex, hdmICcIndex2 } ::= { hdmICcTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.429.1.22.10.1.1.1 | hdmICcIndex | 0 | 0 | The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index… |
1.3.6.1.4.1.429.1.22.10.1.1.2 | hdmICcIndex2 | 0 | 0 | Secondary Index into the ISDN Call Control table. This index is the value from the chassis mib entity relation table that is app… |
1.3.6.1.4.1.429.1.22.10.1.1.3 | hdmICcRateAdapV110 | 0 | 0 | This object enables V110 rate adaption corresponds to S register S67 bit 0. Default = 1 |
1.3.6.1.4.1.429.1.22.10.1.1.4 | hdmICcFixedNtwkRate | 0 | 0 | This object sets the fixed network rate. This object correspond to S register S67 bit 1. Default = 1 |
1.3.6.1.4.1.429.1.22.10.1.1.5 | hdmICcNetworkRate | 0 | 0 | This object sets the Network rate speed. This object corresponds to the modem S register S67 bit 2. Default = 1 |
1.3.6.1.4.1.429.1.22.10.1.1.6 | hdmICcBcLinkDly | 0 | 0 | This object enable a 45 - 65 second link delay. This object corresponds to the S register S67 bit 4. Default = 1 |
1.3.6.1.4.1.429.1.22.10.1.1.7 | hdmICcDisAnlgOvrDig | 0 | 0 | This object is used to set S register S68 bit 0 which, does not allow analog calls over digital data connection. Default = 1 |
1.3.6.1.4.1.429.1.22.10.1.1.8 | hdmICcDisAsyncPPP | 0 | 0 | This object is used to disable/enable async PPP/ sync PPP conversion. This object corresponds to S register S68 bit 4. Default = 1 |
1.3.6.1.4.1.429.1.22.10.1.1.9 | hdmICcDisX75 | 0 | 0 | This object is used to disable/enable X75. This object corresponds to S register S68 bit 5. Default = 1 |
1.3.6.1.4.1.429.1.22.10.1.1.10 | hdmICcStarV2 | 0 | 0 | This object is used to set the data mode of the modem and is equivalent to *V2 = x AT command. Default =1 |
1.3.6.1.4.1.429.1.22.10.1.1.11 | hdmICcStarU1 | 0 | 0 | This object is used to set the originate HDLC protocols of the modem and is equivalent to *U1 = x AT command. Default =2 |
1.3.6.1.4.1.429.1.22.10.1.1.12 | hdmICcStarU2 | 0 | 0 | This object is used to set the originate Non-HDLC protocols of the modem and is equivalent to *U2 = x AT command. Default =1 |
1.3.6.1.4.1.429.1.22.10.1.1.13 | hdmICcStarU3 | 0 | 0 | This object is used to set the originate Analog modem/fax data mode of the modem and is equivalent to *U3 = x AT command. Default… |
1.3.6.1.4.1.429.1.22.10.1.1.14 | hdmICcV120 | 0 | 0 | This object is used to Enable/Disable V120. This object corresponds to S register 68 bit 4. Default=1. |
1.3.6.1.4.1.429.1.22.10.1.1.15 | hdmICcFrameSize | 0 | 0 | This object is used to set the frame size for X75. Default = 2048. |
1.3.6.1.4.1.429.1.22.10.1.1.16 | hdmICcWindowSize | 0 | 0 | This object is used to set the window size of X75. Default=2. |