Phone number stored in modem's non volitile memory. Useful
in providing quick access to frequently called numbers. In
addition mdmCcPhoneString0 is used for the dial on power up
and dial on DTR options.
Parsed from file HDM.MIB.txt
Company: cai
Module: HDM-MIB
Vendor: 3Com
Module: HDM-MIB (HDM.MIB)
Type: TABULAR
Access: read-write
Syntax: DisplayString
( SIZE (
0..36 ) )
Automatically extracted from www.mibdepot.com
hdmCcPhoneString0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..36)) ACCESS read-write STATUS mandatory DESCRIPTION "Phone number stored in modem's non volitile memory. Useful in providing quick access to frequently called numbers. In addition mdmCcPhoneString0 is used for the dial on power up and dial on DTR options." ::= { hdmCcEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.22.4.1.1.1 | hdmCcIndex | 0 | 0 | The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index… |
| 1.3.6.1.4.1.429.1.22.4.1.1.2 | hdmCcIndex2 | 0 | 0 | The Secondary index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of… |
| 1.3.6.1.4.1.429.1.22.4.1.1.3 | hdmCcDialDelay | 0 | 0 | Defines the number of seconds the modem waits between going off hook and begining to dial. Ignored when result code options 2,4,… |
| 1.3.6.1.4.1.429.1.22.4.1.1.4 | hdmCcWaitForCarrier | 0 | 0 | Defines the number of seconds the modem will wait for a carrier signal after dialing. Default=60. |
| 1.3.6.1.4.1.429.1.22.4.1.1.5 | hdmCcInactivityTimer | 0 | 0 | Sets the duration (in seconds) that the modem will maintain a connection when there is no activity on the phone line. The feature… |
| 1.3.6.1.4.1.429.1.22.4.1.1.6 | hdmCcQuietResultCodes | 0 | 0 | Determines whether or not the modem transmits result codes to the DTE. Default=noResult(2). |
| 1.3.6.1.4.1.429.1.22.4.1.1.7 | hdmCcResponseMode | 0 | 0 | Determines whether the modem transmits result codes in the verbal or numeric mode. Default=verbal(2). |
| 1.3.6.1.4.1.429.1.22.4.1.1.8 | hdmCcResultCodeOptions | 0 | 0 | Defines one of eight result code subsets and also defines indirectly how the modem reacts to dial tone etc. Equates to the modem… |
| 1.3.6.1.4.1.429.1.22.4.1.1.9 | hdmCcArqResultCodeMode | 0 | 0 | Defines whether or not the ARQ result codes are sent to the DTE on connection(if result codes are enabled). Default=arqResultsEna… |
| 1.3.6.1.4.1.429.1.22.4.1.1.10 | hdmCcEscCodeRsp | 0 | 0 | Defines the action of the modem in response to the escape code(+++). The default value is determined by the state of Dip switch … |
| 1.3.6.1.4.1.429.1.22.4.1.1.11 | hdmCcAtRecognition | 0 | 0 | Determines which, if any, AT commands the modem will recognize or accept from the DTE. Default=enableAll(3). |
| 1.3.6.1.4.1.429.1.22.4.1.1.12 | hdmCcV32ToneDuration | 0 | 0 | Specifies the duration (in 10ths of a second) that the modem transmits the 3000/600 Hz answer tones for V.32 handshaking. A sett… |
| 1.3.6.1.4.1.429.1.22.4.1.1.14 | hdmCcAutoAnswer | 0 | 0 | Determines the number of rings that the modem will answer calls on. When set to 0 the modem can only originate calls. Default=1. |
| 1.3.6.1.4.1.429.1.22.4.1.1.15 | hdmCcAnswerInOrigMode | 0 | 0 | When enabled the modem will answer calls using the sequence normaly used by the originating modem. Default=disable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.17 | hdmCcPhoneString1 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful for providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.22.4.1.1.18 | hdmCcPhoneString2 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.22.4.1.1.19 | hdmCcPhoneString3 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.22.4.1.1.20 | hdmCcErrorCntlMode | 0 | 0 | Defines if the modem is operating in synchronous or asynchronous mode and how it responds relative to negotiation of error contro… |
| 1.3.6.1.4.1.429.1.22.4.1.1.21 | hdmCcMnpWith1200 | 0 | 0 | Determines if the modem will include MNP/V42 negotiation on 1200 bps connections. Default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.22 | hdmCcMnpWith2400 | 0 | 0 | Determines if the modem will include MNP/V43 negotiation on 2400 bps calls. default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.23 | hdmCcMnpWithV32 | 0 | 0 | Determines if the modem will include MNP/V42 negotiation on V.32 connections. Default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.24 | hdmCcMnpTimeout | 0 | 0 | Specifies the MNP/V42 link request timeout for negotiation of 1200 and 2400 bps calls. Default=5. |
| 1.3.6.1.4.1.429.1.22.4.1.1.25 | hdmCcV21V23FallBackTimer | 0 | 0 | V21/V23 fallback timer, 1/10 sec. NVRAM S Register S29. Default=20 |
| 1.3.6.1.4.1.429.1.22.4.1.1.26 | hdmCcAddnlAnswToneDur | 0 | 0 | Additional answer tone duration, 1/10 sec. NVRAM S Register S49. Default=16. |
| 1.3.6.1.4.1.429.1.22.4.1.1.27 | hdmCcBillingDelayPeriod | 0 | 0 | Billing Delay Period. 1/50 sec. NVRAM S Register S50. Default=100. |
| 1.3.6.1.4.1.429.1.22.4.1.1.28 | hdmCcCarrierAccessCode1 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits (e.g. 9501755). This is … |
| 1.3.6.1.4.1.429.1.22.4.1.1.29 | hdmCcCarrierAccessCode2 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 2nd of 3 C… |
| 1.3.6.1.4.1.429.1.22.4.1.1.30 | hdmCcCarrierAccessCode3 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 3rd of 3 CA… |
| 1.3.6.1.4.1.429.1.22.4.1.1.31 | hdmCcCallingInitStr1 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This string is a configuration string of 1 to 30 characters (e.g. &… |
| 1.3.6.1.4.1.429.1.22.4.1.1.32 | hdmCcCallingInitStr2 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This string is 1 to 30 characters. It does NOT include the AT atten… |
| 1.3.6.1.4.1.429.1.22.4.1.1.33 | hdmCcCallingInitStr3 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT… |
| 1.3.6.1.4.1.429.1.22.4.1.1.34 | hdmCcCallingInitStr4 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT… |
| 1.3.6.1.4.1.429.1.22.4.1.1.35 | hdmCcT1CallSetupProc | 0 | 0 | Determines T1 call setup procedures used. Choices are 'normal' or 'none'. None assumes a dedicated (leased) DS0 assigned to the… |
| 1.3.6.1.4.1.429.1.22.4.1.1.36 | hdmCcT1KpStMfTones | 0 | 0 | hdmCcT1KpStMftones |
| 1.3.6.1.4.1.429.1.22.4.1.1.37 | hdmCcT1CallInitStrUse | 0 | 0 | Determines if calling init strings are used or not. Default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.38 | hdmCcT1CallInitStrBase | 0 | 0 | Determines if the calling init strings are based upon DNIS or ANI. Default=dnisBase(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.39 | hdmCcT1DialInAniDig | 0 | 0 | Sets the number of ANI digits allowed in incoming calls. Default = 0. |
| 1.3.6.1.4.1.429.1.22.4.1.1.40 | hdmCcT1DialInDnisDig | 0 | 0 | Sets the number of DNIS/DID digits allowed in incoming calls. Default = 0. |
| 1.3.6.1.4.1.429.1.22.4.1.1.41 | hdmCcDataOverVoice | 0 | 0 | Data Over Voice support. |
| 1.3.6.1.4.1.429.1.22.4.1.1.42 | hdmCc2100AnswerTone | 0 | 0 | 2100 Hz Answer Tone for DOVBS. |
| 1.3.6.1.4.1.429.1.22.4.1.1.43 | hdmCcEnableV120v42Bis | 0 | 0 | V.42bis Compression over V.120. |