This is the status of the D channel for this PRI span line.
A value of notSupported(1) means that this DS1 is not
operating in ISDN mode or there is no D channel defined on
this span line.
Parsed from file UDS1-MIB.mib.txt
Company: None
Module: UDS1-MIB
This is the status of the D channel for this PRI span line.
A value of notSupported(1) means that this DS1 is not
operating in ISDN mode or there is no D channel defined on
this span line.
Parsed from file UDS1-MIB.mib
Module: UDS1-MIB
Vendor: UTStarcom Incorporated
Module: UDS1-MIB
[Automatically extracted from oidview.com]
uds1StatDChannel OBJECT-TYPE SYNTAX INTEGER{ notSupported(1), inService(2), bChannel(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the status of the D channel for this PRI span line. A value of notSupported(1) means that this DS1 is not operating in ISDN mode or there is no D channel defined on this span line." ::= { uds1StatEntry 12 }
uds1StatDChannel OBJECT-TYPE SYNTAX INTEGER{ notSupported(1), inService(2), bChannel(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the status of the D channel for this PRI span line. A value of notSupported(1) means that this DS1 is not operating in ISDN mode or there is no D channel defined on this span line." ::= { uds1StatEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.4.5.1.1 | uds1StatIndex | 0 | 0 | The index value which uniquely identifies the CSU to which this entry is applicable. The value of this object matches the value … |
| 1.3.6.1.4.1.429.1.4.5.1.2 | uds1StatReceiverGain | 0 | 0 | This object identifies the amount of gain applied to boost the receive signal level to an appropriate operating level. |
| 1.3.6.1.4.1.429.1.4.5.1.3 | uds1StatOutOfFrame | 0 | 0 | This object indicates when the framing pattern for the specified T1 line has been lost and data connot be extracted properly. Th… |
| 1.3.6.1.4.1.429.1.4.5.1.4 | uds1StatLossOfSignal | 0 | 0 | This object indicates when 175 consecutive 0's have been detected. The signal is considered recovered if the 1's density reaches… |
| 1.3.6.1.4.1.429.1.4.5.1.5 | uds1StatReceivingAIS | 0 | 0 | This object identifies when the remote end of the specified T1 line has lost its receive signal and is transmitting a stream of a… |
| 1.3.6.1.4.1.429.1.4.5.1.6 | uds1StatSwitchTypeActive | 0 | 0 | uds1StatSwitchtypeActive |
| 1.3.6.1.4.1.429.1.4.5.1.7 | uds1StatDchanOperational | 0 | 0 | This object reflects the operational status of the D channel on the T1-PRI ISDN NAC. |
| 1.3.6.1.4.1.429.1.4.5.1.8 | uds1StatE1ContCrc | 0 | 0 | This object indicates when continuous CRC errors are being received on the E1 DS1 span line on the T1-PRI ISDN NAC. |
| 1.3.6.1.4.1.429.1.4.5.1.9 | uds1StatE1PhysicalState | 0 | 0 | This object reflects the physical state of the E1 DS1 span line on the T1-PRI ISDN NAC. |
| 1.3.6.1.4.1.429.1.4.5.1.10 | uds1StatLoopBackInit | 0 | 0 | This object tells if the loopback was initiated by the network or by command |
| 1.3.6.1.4.1.429.1.4.5.1.11 | uds1StatNfasDChannel | 0 | 0 | This reflect how a PRI span line is using the DS0 normally assigned as a D channel when NFAS is being used. This object does not… |
| 1.3.6.1.4.1.429.1.4.5.1.13 | uds1StatDs0SrvcChngLst | 0 | 0 | This object contains the current list of DS0s that have changed their state from In Service to Out of Service or Vice versa. The… |
| 1.3.6.1.4.1.429.1.4.5.1.14 | uds1StatMultiFrame | 0 | 0 | This object identifies when the E1/PRI NAC line has lost synchronization with the Time-Slot 16 Multi-Frame alignment pattern. Onl… |
| 1.3.6.1.4.1.429.1.4.5.1.15 | uds1StatRemMultiFrame | 0 | 0 | This object identifies when the remote end of the specified E1/PRI NAC line has lost synchronization with the Time-Slot 16 Multi-… |
| 1.3.6.1.4.1.429.1.4.5.1.16 | uds1StatServiceState | 0 | 0 | This object shows the current state of the DS1 Service. Default = inService(2). |