Sets the number of DNIS/DID digits allowed in incoming
calls. Default = 0.
Parsed from file MDM-MIB.mib.txt
Company: None
Module: MDM-MIB
Sets the number of DNIS/DID digits allowed in incoming
calls. Default = 0.
Parsed from file MDM-MIB.mib
Module: MDM-MIB
Vendor: UTStarcom Incorporated
Module: MDM-MIB
[Automatically extracted from oidview.com]
mdmCcT1DialInDnisDig OBJECT-TYPE SYNTAX INTEGER (0..12) ACCESS read-write STATUS optional DESCRIPTION "Sets the number of DNIS/DID digits allowed in incoming calls. Default = 0." ::= { mdmCcEntry 49 }
mdmCcT1DialInDnisDig OBJECT-TYPE SYNTAX INTEGER (0..12) ACCESS read-write STATUS optional DESCRIPTION "Sets the number of DNIS/DID digits allowed in incoming calls. Default = 0." ::= { mdmCcEntry 49 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.6.7.1.1.1 | mdmCcIndex | 0 | 0 | The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index… |
| 1.3.6.1.4.1.429.1.6.7.1.1.2 | mdmCcDialDelay | 0 | 0 | Defines the number of seconds the modem waits between going off hook and begining to dial. Ignored when result code options 2,4,… |
| 1.3.6.1.4.1.429.1.6.7.1.1.3 | mdmCcWaitForCarrier | 0 | 0 | Defines the number of seconds the modem will wait for a carrier signal after dialing. Default=60. |
| 1.3.6.1.4.1.429.1.6.7.1.1.4 | mdmCcInactivityTimer | 0 | 0 | Sets the duration (in seconds) that the modem will maintain a connection when there is no activity on the phone line. The feature… |
| 1.3.6.1.4.1.429.1.6.7.1.1.5 | mdmCcAutoDialOnDtrEna | 0 | 0 | When enabled the modem will dial the number present in mdmCCPhoneString0 when the DTR signal transitions from low to high. Defau… |
| 1.3.6.1.4.1.429.1.6.7.1.1.6 | mdmCcAutoDialOnPwrUpEna | 0 | 0 | When enabled, the modem will dial the number present in mdmCcPhoneString0 on power up or after a reset. Default=disable(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.7 | mdmCcGhostPortLockEna | 0 | 0 | When enabled, the modem requires that DTR go low before it will accept another call. The modem also implements a Fast Connect mo… |
| 1.3.6.1.4.1.429.1.6.7.1.1.8 | mdmCcQuietResultCodes | 0 | 0 | Determines whether or not the modem transmits result codes to the DTE. Default=noResult(2). |
| 1.3.6.1.4.1.429.1.6.7.1.1.9 | mdmCcResponseMode | 0 | 0 | Determines whether the modem transmits result codes in the verbal or numeric mode. Default=verbal(2). |
| 1.3.6.1.4.1.429.1.6.7.1.1.10 | mdmCcResultCodeOptions | 0 | 0 | Defines one of eight result code subsets and also defines indirectly how the modem reacts to dial tone etc. Equates to the modem… |
| 1.3.6.1.4.1.429.1.6.7.1.1.11 | mdmCcArqResultCodeMode | 0 | 0 | Defines whether or not the ARQ result codes are sent to the DTE on connection(if result codes are enabled). Default=arqResultsEna… |
| 1.3.6.1.4.1.429.1.6.7.1.1.12 | mdmCcEscCodeRsp | 0 | 0 | Defines the action of the modem in response to the escape code(+++). The default value is determined by the state of Dip switch … |
| 1.3.6.1.4.1.429.1.6.7.1.1.13 | mdmCcAtRecognition | 0 | 0 | Determines which, if any, AT commands the modem will recognize or accept from the DTE. Default=ignore(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.14 | mdmCcMgmtSysMsgDis | 0 | 0 | Determines if the modem is to send special result codes, triggered by user conflicts with the management system, to the DTE. Def… |
| 1.3.6.1.4.1.429.1.6.7.1.1.15 | mdmCcV32ToneDuration | 0 | 0 | Specifies the duration (in 10ths of a second) that the modem transmits the 3000/600 Hz answer tones for V.32 handshaking. A sett… |
| 1.3.6.1.4.1.429.1.6.7.1.1.16 | mdmCcV23Timeout | 0 | 0 | Duration (in 10ths of a second) the modem will transmit the V23 amswer tones. When set to 0 the V23 answer tones are disabled re… |
| 1.3.6.1.4.1.429.1.6.7.1.1.17 | mdmCcAutoAnswer | 0 | 0 | Determines the number of rings that the modem will answer calls on. When set to 0 the modem can only originate calls. Default=1. |
| 1.3.6.1.4.1.429.1.6.7.1.1.18 | mdmCcAnswerInOrigMode | 0 | 0 | When enabled the modem will answer calls using the sequence normaly used by the originating modem. Default=disable(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.19 | mdmCcArqBufWait | 0 | 0 | Sets the duration (in seconds) that the modem waits on an ARQ call before clearing the transmit buffer and dropping carrier after… |
| 1.3.6.1.4.1.429.1.6.7.1.1.20 | mdmCcPhoneString0 | 0 | 0 | Phone number stored in modem's non volitile memory. Useful in providing quick access to frequently called numbers. In addition … |
| 1.3.6.1.4.1.429.1.6.7.1.1.21 | mdmCcPhoneString1 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful for providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.6.7.1.1.22 | mdmCcPhoneString2 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.6.7.1.1.23 | mdmCcPhoneString3 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.6.7.1.1.24 | mdmCcErrorCntlMode | 0 | 0 | Defines if the modem is operating in synchronous or asynchronous mode and how it responds relative to negotiation of error contro… |
| 1.3.6.1.4.1.429.1.6.7.1.1.25 | mdmCcMiMic | 0 | 0 | Specifies whether the modem will recognize MI/MIC closure as the mechanism for detecting incomming calls. Default=disable(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.26 | mdmCcMnpWith1200 | 0 | 0 | Determines if the modem will include MNP/V42 negotiation on 1200 bps connections. Default=enable(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.27 | mdmCcMnpWith2400 | 0 | 0 | Determines if the modem will include MNP/V43 negotiation on 2400 bps calls. default=enable(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.28 | mdmCcMnpWithV32 | 0 | 0 | Determines if the modem will include MNP/V42 negotiation on V.32 connections. Default=enable(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.29 | mdmCcMnpTimeout | 0 | 0 | Specifies the MNP/V42 link request timeout for negotiation of 1200 and 2400 bps calls. Default=5. |
| 1.3.6.1.4.1.429.1.6.7.1.1.30 | mdmCcV21V23FallBackTimer | 0 | 0 | V21/V23 fallback timer, 1/10 sec. NVRAM S Register S29. Default=20 |
| 1.3.6.1.4.1.429.1.6.7.1.1.31 | mdmCcAddnlAnswToneDur | 0 | 0 | Additional answer tone duration, 1/10 sec. NVRAM S Register S49. Default=16. |
| 1.3.6.1.4.1.429.1.6.7.1.1.32 | mdmCcBillingDelayPeriod | 0 | 0 | Billing Delay Period. 1/50 sec. NVRAM S Register S50. Default=100. |
| 1.3.6.1.4.1.429.1.6.7.1.1.33 | mdmCcCarrierAccessCode1 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits (e.g. 9501755). This is … |
| 1.3.6.1.4.1.429.1.6.7.1.1.34 | mdmCcCarrierAccessCode2 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 2nd of 3 C… |
| 1.3.6.1.4.1.429.1.6.7.1.1.35 | mdmCcCarrierAccessCode3 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 3rd of 3 CA… |
| 1.3.6.1.4.1.429.1.6.7.1.1.36 | mdmCcCallingInitStr1 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This string is a configuration string of 1 to 30 characters (e.g. &… |
| 1.3.6.1.4.1.429.1.6.7.1.1.37 | mdmCcCallingInitStr2 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This string is 1 to 30 characters. It does NOT include the AT atten… |
| 1.3.6.1.4.1.429.1.6.7.1.1.38 | mdmCcCallingInitStr3 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT… |
| 1.3.6.1.4.1.429.1.6.7.1.1.39 | mdmCcCallingInitStr4 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT… |
| 1.3.6.1.4.1.429.1.6.7.1.1.40 | mdmCcDataFaxMode | 0 | 0 | Gives the current Data/FAX mode of the modem. |
| 1.3.6.1.4.1.429.1.6.7.1.1.41 | mdmCcT1CallSetupProc | 0 | 0 | Determines T1 call setup procedures used. Choices are 'normal' or 'none'. None assumes a dedicated (leased) DS0 assigned to the… |
| 1.3.6.1.4.1.429.1.6.7.1.1.42 | mdmCcT1DialToneType | 0 | 0 | Determines if MF or DTMF tones are used for T1 signaling. Default = mfTones(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.43 | mdmCcT1KpStMfTones | 0 | 0 | mdmCcT1KpStMftones |
| 1.3.6.1.4.1.429.1.6.7.1.1.44 | mdmCcT1CallInitStrUse | 0 | 0 | Determines if calling init strings are used or not. Default=enable(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.45 | mdmCcT1CallInitStrBase | 0 | 0 | Determines if the calling init strings are based upon DNIS or ANI. Default=dnisBase(1). |
| 1.3.6.1.4.1.429.1.6.7.1.1.46 | mdmCcIntBlackListDis | 0 | 0 | Disable BlackList restriction in the international modems. Default=0 (enable) s40.1 reg |
| 1.3.6.1.4.1.429.1.6.7.1.1.47 | mdmCcOffHookRestrict | 0 | 0 | Disable off-hook restriction in the international modems. Default=0 (enable) S40.2 reg |
| 1.3.6.1.4.1.429.1.6.7.1.1.48 | mdmCcT1DialInAniDig | 0 | 0 | Sets the number of ANI digits allowed in incoming calls. Default = 0. |
| 1.3.6.1.4.1.429.1.6.7.1.1.50 | mdmCcNoPbNoConnEna | 0 | 0 | Sets if to answer a call when there is no Packet Bus link. Normal is the Default =0 |
| 1.3.6.1.4.1.429.1.6.7.1.1.51 | mdmCcIdleDiscPatt | 0 | 0 | Idle disconnect pattern sent to the T1 NAC. Normal values: USA = 1, international = 84. Default = 1. Configure the T1 identical… |
| 1.3.6.1.4.1.429.1.6.7.1.1.52 | mdmCcMnp10 | 0 | 0 | S61.4 register disable/enable MNP10 originate mode. |
| 1.3.6.1.4.1.429.1.6.7.1.1.53 | mdmCcMnp10Ec | 0 | 0 | S61.5 register disable/enable MNP10EC originate mode. |
| 1.3.6.1.4.1.429.1.6.7.1.1.54 | mdmCcAtzPbHandling | 0 | 0 | ATZ handling over Packet Bus. S72 REG |
| 1.3.6.1.4.1.429.1.6.7.1.1.55 | mdmCcDefltPRISlot | 0 | 0 | Default dialout PRI slot. Default = 1 |
| 1.3.6.1.4.1.429.1.6.7.1.1.56 | mdmCcExtDTMFToneSupport | 0 | 0 | Enable/Disable DTMF extended support. Default = disable |
| 1.3.6.1.4.1.429.1.6.7.1.1.57 | mdmCcDataOverVoice | 0 | 0 | Data Over Voice support originate S68.1. |
| 1.3.6.1.4.1.429.1.6.7.1.1.58 | mdmCc2100AnswerTone | 0 | 0 | Data Over Voice support answer S68.2. |
| 1.3.6.1.4.1.429.1.6.7.1.1.59 | mdmCcEnableV120v42Bis | 0 | 0 | V.42bis Compression over V.120. S67.4 |
| 1.3.6.1.4.1.429.1.6.7.1.1.60 | mdmCcHdlcLicIe | 0 | 0 | This object is to Enable\Disable LIC IE message for HDLC protocols. S Register S68.3 |
| 1.3.6.1.4.1.429.1.6.7.1.1.61 | mdmCcDtmfTerminationTone | 0 | 0 | mdmCcDtmfterminationTone |
| 1.3.6.1.4.1.429.1.6.7.1.1.62 | mdmCcAfaxMaxRateSrvOpt20 | 0 | 0 | This object is used to limit the maximum rate for an Analog Fax Connection. Service option 20. Upper nibble of the S94 register. |
| 1.3.6.1.4.1.429.1.6.7.1.1.63 | mdmCcAfaxMaxRateSrvOpt21 | 0 | 0 | This object is used to limit the maximum rate for an Analog Fax Connection. Service option 21. Lower nibble of S94 register. |