The maximum time delay before sending a delayed RR. This
must be considerably less than the Ack time value. Value
is in 0.1 second units.
Default=4.
Parsed from file ULPB.MIB.txt
Company: cai
Module: ULPB-MIB
Vendor: 3Com
Module: ULPB-MIB (ULPB.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
0..3000 )
Automatically extracted from www.mibdepot.com
ulpbAdmnT2AckDelayTime OBJECT-TYPE SYNTAX INTEGER (0..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum time delay before sending a delayed RR. This must be considerably less than the Ack time value. Value is in 0.1 second units. Default=4." ::= { ulpbAdmnEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.9.1.1.1 | ulpbAdmnIndex | 0 | 0 | A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the in… |
| 1.3.6.1.4.1.429.1.9.1.1.2 | ulpbAdmnN2ReXmitVal | 0 | 0 | The maximum number of times a PDU is sent after the Ack, P-bit or Reject timer expires. It also limits RR w/P-bit sends with rem… |
| 1.3.6.1.4.1.429.1.9.1.1.3 | ulpbAdmnT1AckTime | 0 | 0 | The time interval during which the LAPB expects to receive a response to an outstanding IPDU or unexpected response to a sent unn… |
| 1.3.6.1.4.1.429.1.9.1.1.4 | ulpbAdmnTpfVal | 0 | 0 | The time interval during which the LAPB expects to receive a PDU with the F-bit set to 1 in response to a command with the P-bit … |
| 1.3.6.1.4.1.429.1.9.1.1.5 | ulpbAdmnTrejVal | 0 | 0 | The time interval during which the LAPB expects to receive a reply to a sent REJ TPDU. Value is in 0.1 second units. Default=25. |
| 1.3.6.1.4.1.429.1.9.1.1.6 | ulpbAdmnTbusyVal | 0 | 0 | The time interval during which the LAPB waits for an indication of the clearance of a busy condition at the other LAPB. Value is … |
| 1.3.6.1.4.1.429.1.9.1.1.7 | ulpbAdmnLinkIdleTime | 0 | 0 | The time interval during which the LAPB expexts to receive a PDU from the other LAPB. At expiration, the P/F cycle, which may re… |
| 1.3.6.1.4.1.429.1.9.1.1.9 | ulpbAdmnRecKWindowSz | 0 | 0 | The maximum number of unacknowledged IPDUs that can be received before the acknowledgement RR must be sent. Default=3. |
| 1.3.6.1.4.1.429.1.9.1.1.10 | ulpbAdmnXmitKWindowSz | 0 | 0 | The maximum number of unacknowledged PDUs that may be sent before a response is required. Normal Mode = 1-7. Extended Mode = 1-127.… |
| 1.3.6.1.4.1.429.1.9.1.1.11 | ulpbAdmnLocProbe | 0 | 0 | The position before the window is closed at which an I PDU is sent with the P-bit set to solicit an acknowledgment from the recei… |
| 1.3.6.1.4.1.429.1.9.1.1.12 | ulpbAdmnMaxRecFrmSz | 0 | 0 | The maximum allowable received I frame size. It consists of X25 data + x25 protocol + LAPB protocol. Default=300. |
| 1.3.6.1.4.1.429.1.9.1.1.13 | ulpbAdmnIgnUaError | 0 | 0 | When the connection is in ERROR state, this parameter defines whether or not to ignore any UA frames received. Default=disable(1). |
| 1.3.6.1.4.1.429.1.9.1.1.14 | ulpbAdmnFrmrFrmrError | 0 | 0 | When the connection is in ERROR state, this parameter defines whether or not to re-transmit a frame reject if one is received. Def… |
| 1.3.6.1.4.1.429.1.9.1.1.15 | ulpbAdmnFrmrInvrspError | 0 | 0 | When the connection is in ERROR state, this parameter defines whether or not to transmit a frame reject if an invalid frame respo… |
| 1.3.6.1.4.1.429.1.9.1.1.16 | ulpbAdmnSframePbit | 0 | 0 | This parameter defines whether or not to send a frame reject if an S-Frame is received without the P-bit set. Default=disable(1). |
| 1.3.6.1.4.1.429.1.9.1.1.17 | ulpbAdmnDmOnAdm | 0 | 0 | This parameter defines whether or not to send a DM on entry to ADM state. Default=enable(2). |