This object determines the required duration of the LOS
state before active calls are dropped and the signalling is
reinitialised. Restoration of signal during this period
allows calls to continue.
Parsed from file HDR2-MIB.mib.txt
Company: None
Module: HDR2-MIB
This object determines the required duration of the LOS
state before active calls are dropped and the signalling is
reinitialised. Restoration of signal during this period
allows calls to continue.
Parsed from file HDR2-MIB.mib
Module: HDR2-MIB
Vendor: UTStarcom Incorporated
Module: HDR2-MIB
[Automatically extracted from oidview.com]
hdr2CfgDelayLos OBJECT-TYPE SYNTAX INTEGER (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the required duration of the LOS state before active calls are dropped and the signalling is reinitialised. Restoration of signal during this period allows calls to continue." DEFVAL { 6000 } ::= { hdr2CfgEntry 22 }
hdr2CfgDelayLos OBJECT-TYPE SYNTAX INTEGER (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the required duration of the LOS state before active calls are dropped and the signalling is reinitialised. Restoration of signal during this period allows calls to continue." DEFVAL { 6000 } ::= { hdr2CfgEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.48.1.1.1.1 | hdr2CfgIndex | 0 | 0 | The index which uniquely identifies the Hiper E1/R2 CARD to which this entry is applicable. |
| 1.3.6.1.4.1.429.4.48.1.1.1.2 | hdr2CfgRegSigType | 0 | 0 | This object Defines the type of Register Signaling used for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.3 | hdr2CfgAnumIden | 0 | 0 | This parameter enables or disables the collection of calling party ( A party or ANI) phone numbers when used with R2MFC signaling… |
| 1.3.6.1.4.1.429.4.48.1.1.1.4 | hdr2CfgForcedRel | 0 | 0 | In E1/ R2 ,Forced Release Line signal will be sent only in case of this parameter is enabled. This signal is optional. |
| 1.3.6.1.4.1.429.4.48.1.1.1.5 | hdr2CfgLastBDigTout | 0 | 0 | This parameter decides, after how many milliseconds of silence during the B digit reception, the B party number is assumed as com… |
| 1.3.6.1.4.1.429.4.48.1.1.1.6 | hdr2CfgAddrComplete | 0 | 0 | On reception of this signal it is assumed that the required number of B party digits are received. It can hold the values ranging… |
| 1.3.6.1.4.1.429.4.48.1.1.1.7 | hdr2CfgEndBparty | 0 | 0 | This indicates whether I15 is will be received as an indication for End of B party number or not. If enabled, at the end of B pa… |
| 1.3.6.1.4.1.429.4.48.1.1.1.8 | hdr2CfgAlawMulaw | 0 | 0 | This object is configuration to apply A Law(E1) or MuLaw(T1) Companding. |
| 1.3.6.1.4.1.429.4.48.1.1.1.9 | hdr2CfgLineSigType | 0 | 0 | This object defines the type of Line Signaling for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.10 | hdr2CfgProjID | 0 | 0 | Depending on this parameter, country dependent or project dependent parameters are updated. Each and every parameter has a set of… |
| 1.3.6.1.4.1.429.4.48.1.1.1.11 | hdr2CfgSeizeAck | 0 | 0 | It defines whether seize acknowledge signal is used or not for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.12 | hdr2CfgAnumBnum | 0 | 0 | During Bit oriented Register Signaling , after number of B party ( called party or DNIS) digits have been received, the A party (… |
| 1.3.6.1.4.1.429.4.48.1.1.1.13 | hdr2CfgSubBusy | 0 | 0 | This object is used in case of subscirber busy. |
| 1.3.6.1.4.1.429.4.48.1.1.1.14 | hdr2CfgSndCallingPtyCatgy | 0 | 0 | This register Signal requests the calling ( A PARTY's ) category. |
| 1.3.6.1.4.1.429.4.48.1.1.1.15 | hdr2CfgLineDirection | 0 | 0 | This object sets the direction of the channels on the span line. |
| 1.3.6.1.4.1.429.4.48.1.1.1.16 | hdr2CfgPersistentOverride | 0 | 0 | This object allows the recieved line signal persistence (debounce time). |
| 1.3.6.1.4.1.429.4.48.1.1.1.17 | hdr2CfgWrongNumber | 0 | 0 | This object is the backward register signal used to indicate that an invalid number has been dialed. |
| 1.3.6.1.4.1.429.4.48.1.1.1.18 | hdr2CfgIncomingCpc | 0 | 0 | This object determines the default calling party category to be assumed when none is supplied for an incoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.19 | hdr2CfgRegSigStatus | 0 | 0 | This object determines whether or not register signalling is used for incoming and outgoing calls for R2. |
| 1.3.6.1.4.1.429.4.48.1.1.1.20 | hdr2CfgUnusedAbcd | 0 | 0 | This object determines the bit pattern transmitted for whichever of the ABCD bits are not used for the selected line signalling s… |
| 1.3.6.1.4.1.429.4.48.1.1.1.21 | hdr2CfgBlkToBlk | 0 | 0 | This object determines whether or not a blocking signals received in the idle state is automatically responded to with a transmit… |
| 1.3.6.1.4.1.429.4.48.1.1.1.23 | hdr2CfgInGlare | 0 | 0 | This object determines whether the incoming call is accepted and the outgoing call is dropped in a glare condition, or both calls… |
| 1.3.6.1.4.1.429.4.48.1.1.1.24 | hdr2CfgClrCall | 0 | 0 | This object determines whether an active call is cleared when an unexpected line signal is received, or the line signal is ignore… |
| 1.3.6.1.4.1.429.4.48.1.1.1.25 | hdr2CfgANumQry | 0 | 0 | This object determines whether or not an extra MFC cycle is used before to the A-number to indicate whether an A-number is availa… |
| 1.3.6.1.4.1.429.4.48.1.1.1.26 | hdr2CfgANumNAv | 0 | 0 | THis object interpret I-12 as A-number not available. |
| 1.3.6.1.4.1.429.4.48.1.1.1.27 | hdr2CfgANumReq | 0 | 0 | this object backward register signal used to request transmission of the next A-number digit Frequently this is the same as the s… |
| 1.3.6.1.4.1.429.4.48.1.1.1.28 | hdr2CfgClrFwd | 0 | 0 | This object repeatd size/clear-forward sequence is sent to startup to try to provoke a response from attached equipment. |
| 1.3.6.1.4.1.429.4.48.1.1.1.29 | hdr2CfgRelGuard | 0 | 0 | This object is duration for which Release Guard signal is sent. |
| 1.3.6.1.4.1.429.4.48.1.1.1.30 | hdr2CfgPIClrBck | 0 | 0 | This object determines whether or not a repeated release/Seize-ack sequence is sent while attempting to clear anincoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.31 | hdr2CfgDelayAns | 0 | 0 | this object determines the delay between the end of addressing and transmission of the answer signal. |
| 1.3.6.1.4.1.429.4.48.1.1.1.32 | hdr2CfgBNumLen | 0 | 0 | this object determines the number of B-number digits to accept beore sending the 'address complete'signal, provided the 'end of B… |
| 1.3.6.1.4.1.429.4.48.1.1.1.33 | hdr2CfgActBTout | 0 | 0 | this object determines action to be taken on last B-digit timeout. |
| 1.3.6.1.4.1.429.4.48.1.1.1.34 | hdr2CfgInSubFree | 0 | 0 | this object backward register signal used to indicate acceptance of an incoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.35 | hdr2CfgBNumNFnd | 0 | 0 | this object determines the action on B-Number not found in teh DNIS handling table. |
| 1.3.6.1.4.1.429.4.48.1.1.1.36 | hdr2CfgSndBNumN | 0 | 0 | this object backward signal requesting retransmission of curent B-number digit for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.37 | hdr2CfgSndBNumN1 | 0 | 0 | this object backward signal requesting transmission of B-number digit N-1 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.38 | hdr2CfgSndBNumN2 | 0 | 0 | this object backward signal requesting transimission of B-number digit N-2 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.39 | hdr2CfgSndBNumN3 | 0 | 0 | this object backward signal requesting transimission of B-number digit N-3 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.40 | hdr2CfgSndFBNum | 0 | 0 | this object determines whether or not the I-15 'end of B-number' signal is used for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.41 | hdr2CfgDumANum | 0 | 0 | this object default A-number for outgoing calls in case none is supplied during call initiation. |
| 1.3.6.1.4.1.429.4.48.1.1.1.42 | hdr2CfgEndANum | 0 | 0 | This object forward register signal used to indicate that no more a_number digits are avaible.default=iii-15. |
| 1.3.6.1.4.1.429.4.48.1.1.1.43 | hdr2CfgOutCatAnalog | 0 | 0 | This object forward signals used to indicate the call category for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.44 | hdr2CfgOutCatDigital | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.48.1.1.1.45 | hdr2CfgOutCatTest | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.48.1.1.1.46 | hdr2CfgOutCatMaintenance | 0 | 0 | None |