Each ring builder has two external trunk connections by which
a ring builder may be connected to other token ring devices
capable of supporting a backup path, e.g. another ring
builder. Each external connection attaches to a dual ring
cable. One of the rings is used to carry traffic in a fault
free network. The other ring is used as a backup. If an error
should be detected on the main ring then suitable stations can
wrap the active path onto the backup. The ring builder is
such a device. The fault recovery is handled at the ring in
and ring out ports. Control of the external connections is
via the Ring In Mode parameter. If the connection is in
FAIL-SAFE mode this parameter reflects the automatically
determined state of the connection. If the mode is NOT
FAIL-SAFE this parameter will read the same as the mode
parameter.
Parsed from file lbhub-msh.mib.txt
Company: None
Module: LBHUB-MSH-MIB
Each ring builder has two external trunk connections by which
a ring builder may be connected to other token ring devices
capable of supporting a backup path, e.g. another ring
builder. Each external connection attaches to a dual ring
cable. One of the rings is used to carry traffic in a fault
free network. The other ring is used as a backup. If an error
should be detected on the main ring then suitable stations can
wrap the active path onto the backup. The ring builder is
such a device. The fault recovery is handled at the ring in
and ring out ports. Control of the external connections is
via the Ring In Mode parameter. If the connection is in
FAIL-SAFE mode this parameter reflects the automatically
determined state of the connection. If the mode is NOT
FAIL-SAFE this parameter will read the same as the mode
parameter.
Parsed from file LBHUB-MSH-MIB.mib
Module: LBHUB-MSH-MIB
Vendor: 3Com
Module: LBHUB-MSH-MIB (lbhub-msh.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
rbRingInState OBJECT-TYPE SYNTAX INTEGER { open (1), wrap (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Each ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable of supporting a backup path, e.g. another ring builder. Each external connection attaches to a dual ring cable. One of the rings is used to carry traffic in a fault free network. The other ring is used as a backup. If an error should be detected on the main ring then suitable stations can wrap the active path onto the backup. The ring builder is such a device. The fault recovery is handled at the ring in and ring out ports. Control of the external connections is via the Ring In Mode parameter. If the connection is in FAIL-SAFE mode this parameter reflects the automatically determined state of the connection. If the mode is NOT FAIL-SAFE this parameter will read the same as the mode parameter." ::= { ringBuilderTableEntry 5 }
rbRingInState OBJECT-TYPE SYNTAX INTEGER { open (1), wrap (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Each ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable of supporting a backup path, e.g. another ring builder. Each external connection attaches to a dual ring cable. One of the rings is used to carry traffic in a fault free network. The other ring is used as a backup. If an error should be detected on the main ring then suitable stations can wrap the active path onto the backup. The ring builder is such a device. The fault recovery is handled at the ring in and ring out ports. Control of the external connections is via the Ring In Mode parameter. If the connection is in FAIL-SAFE mode this parameter reflects the automatically determined state of the connection. If the mode is NOT FAIL-SAFE this parameter will read the same as the mode parameter." ::= { ringBuilderTableEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.14.3.1.1.1 | rbServiceId | 0 | 0 | This identifies one of potentially several ring builders within the chassis. |
| 1.3.6.1.4.1.43.14.3.1.1.3 | rbRingInMedia | 0 | 0 | This object identifies the physical media to which the Ring In port of the Ring Builder is, or could be, connected. |
| 1.3.6.1.4.1.43.14.3.1.1.4 | rbRingInMode | 0 | 0 | Each ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable… |
| 1.3.6.1.4.1.43.14.3.1.1.6 | rbRingOutMedia | 0 | 0 | This object identifies the physical media to which the Ring Out port of the Ring Builder is, or could be, connected. |
| 1.3.6.1.4.1.43.14.3.1.1.7 | rbRingOutMode | 0 | 0 | Each ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable… |
| 1.3.6.1.4.1.43.14.3.1.1.8 | rbRingOutState | 0 | 0 | Each ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable… |
| 1.3.6.1.4.1.43.14.3.1.1.9 | rbMode | 0 | 0 | As well as providing control over network connection at the ring in and ring out ports, the Ringbuilder has three modes that also… |
| 1.3.6.1.4.1.43.14.3.1.1.10 | rbTest | 0 | 0 | Setting this object to test(2) causes the Ringbuilder to execute a test by transmitting a frame to itself and checking that it is… |
| 1.3.6.1.4.1.43.14.3.1.1.11 | rbDRIState | 0 | 0 | Distributive Recovery Interface ( DRI ) allows the Active MAU to determine which of its stations are beaconing or causing problem… |