A count of the Ethernet Ports supported by this system.
Parsed from file 3c16640.mib.txt
Company: None
Module: LINKSWITCH-MIB
A count of the Ethernet Ports supported by this system.
Parsed from file LINKSWITCH-MIB.mib
Module: LINKSWITCH-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
lsEportNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A count of the Ethernet Ports supported by this system." ::= { linkSwitch 12 }
lsEportNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A count of the Ethernet Ports supported by this system." ::= { linkSwitch 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.17.12.0 | lsEportNumber | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.17.1 | lsSRFilterEnable | 1 | 1 | When false, the Address Filter forwards Source Routed frames, that is, frames with a 1 in the MSB of the Source Address. When tr… |
| 1.3.6.1.4.1.43.17.2 | lsSegmentFilterEnable | 1 | 1 | Controls action taken with Eth frames with source and destination stations on the same segment (i.e. port). When true, the Addres… |
| 1.3.6.1.4.1.43.17.3 | lsMcastFilterEnable | 1 | 1 | When false, all frames with a Multicast Destination Address that does not match any Address Filter entry are forwarded to all por… |
| 1.3.6.1.4.1.43.17.4 | lsLoopDetectAction | 1 | 1 | If a station appears to be on two ports, Address Filter thrashing will occur. Detection of this situation is possible, and this … |
| 1.3.6.1.4.1.43.17.5 | lsAddressAgingTimer | 1 | 1 | A count of the seconds that will elapse before the Address Filter contents are 'aged' to remove entries which are not active. De… |
| 1.3.6.1.4.1.43.17.6 | lsIPEchoAgingHelp | 1 | 1 | If true, an IP echo frame will be broadcast on the subnet, which will cause otherwise quiecient stations to become active. The r… |
| 1.3.6.1.4.1.43.17.7 | lsProdVerSW | 1 | 1 | This describes the version of the software currently running. Returns a string in the form X.YZ, where X represents the major ver… |
| 1.3.6.1.4.1.43.17.8 | lsProdVerHW | 1 | 1 | This describes the version of the hardware currently running. Returns a string in the form X.YZ, where X represents the major ver… |
| 1.3.6.1.4.1.43.17.9 | lsLEDstate | 1 | 1 | A binary structure which describes the current state of all of the LEDs of an LinkSwitch. Actual layout available on request. |
| 1.3.6.1.4.1.43.17.10 | lsTestResult | 1 | 1 | When a test is initiated via lsAction, the result of the test is stored in this variable when the test has completed or failed. … |
| 1.3.6.1.4.1.43.17.11 | lsAction | 1 | 1 | Value when read will be other. Writing a value to this object will result in the associated action taking place. Note that it i… |
| 1.3.6.1.4.1.43.17.13 | lsEportTable | 1 | 40 | None |
| 1.3.6.1.4.1.43.17.14 | lsStationsNumber | 1 | 1 | A count of stations whose Physical Address has been detected in the Source Address field of a frame which was transmitted by a st… |
| 1.3.6.1.4.1.43.17.15 | lsStationsTable | 1 | 4 | None |
| 1.3.6.1.4.1.43.17.16 | lsBusCts | 1 | 1 | A binary structure which contains the FtoE and EtoF counters for all ls ports. Actual layout available on request. |
| 1.3.6.1.4.1.43.17.17 | lsPortAMediaPresent | 1 | 1 | Reports presence and type of FDDI Port A Media. For FMS LinkSwitch, only Fiber and UTP are supported. |
| 1.3.6.1.4.1.43.17.18 | lsPortBMediaPresent | 1 | 1 | Reports presence and type of FDDI Port B Media. For FMS LinkSwitch, only Fiber and UTP are supported. |
| 1.3.6.1.4.1.43.17.19 | lsFMSBackupPSSense | 1 | 1 | Reports the presence and status of the backup power supply on FMS LinkSwitch Only. |
| 1.3.6.1.4.1.43.17.20 | lsfddiPATHRingLatency | 1 | 1 | Reports the measurement (in 80 nanosecond ticks) of total accumulated latency of the ring associated with the current path. |