OID reference

sFlowDataSource

1.3.6.1.4.1.4300.1.1.4.1.1

Description

Identifies the source of the data for the sFlow sampler. The following data source types are currently defined: - ifIndex.<I> DataSources of this traditional form are called 'port-based'. Ideally the sampling entity will perform sampling on all flows originating from or destined to the specified interface. However, if…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.4300.1.1.4.1 (sFlowEntry, vtAdapterGroup, sFlowRcvrEntry)
Node code
1
Node names
  • sFlowDataSource
  • sFlowRcvrIndex
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.4300.1.1.4.1.1
URN notation
urn:oid:1.3.6.1.4.1.4300.1.1.4.1.1
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 4300 1 1 4 1 1}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowTable(4) sFlowEntry(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowTable(4) sFlowEntry(1) sFlowRcvrIndex(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowTable(4) vtAdapterGroup(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowTable(4) vtAdapterGroup(1) sFlowRcvrIndex(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowTable(4) sFlowRcvrEntry(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowTable(4) sFlowRcvrEntry(1) sFlowRcvrIndex(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) vtAdapterGroups(4) sFlowEntry(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) vtAdapterGroups(4) sFlowEntry(1) sFlowRcvrIndex(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) vtAdapterGroups(4) vtAdapterGroup(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) vtAdapterGroups(4) vtAdapterGroup(1) sFlowRcvrIndex(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) vtAdapterGroups(4) sFlowRcvrEntry(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) vtAdapterGroups(4) sFlowRcvrEntry(1) sFlowRcvrIndex(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowRcvrTable(4) sFlowEntry(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowRcvrTable(4) sFlowEntry(1) sFlowRcvrIndex(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowRcvrTable(4) vtAdapterGroup(1) sFlowDataSource(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4300 sFlowMIB(1) sFlowAgent(1) sFlowRcvrTable(4) vtAdapterGroup(1) sFlowRcvrIndex(1)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/4300/1/1/4/1/1
  • /ISO/Identified-Organization/6/1/4/1/4300/1/1/4/1/1
  • /ISO/3/6/1/4/1/4300/1/1/4/1/1
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowTable/sFlowEntry/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowTable/sFlowEntry/sFlowRcvrIndex
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowTable/vtAdapterGroup/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowTable/vtAdapterGroup/sFlowRcvrIndex
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowTable/sFlowRcvrEntry/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowTable/sFlowRcvrEntry/sFlowRcvrIndex
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/vtAdapterGroups/sFlowEntry/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/vtAdapterGroups/sFlowEntry/sFlowRcvrIndex
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/vtAdapterGroups/vtAdapterGroup/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/vtAdapterGroups/vtAdapterGroup/sFlowRcvrIndex
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/vtAdapterGroups/sFlowRcvrEntry/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/vtAdapterGroups/sFlowRcvrEntry/sFlowRcvrIndex
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowRcvrTable/sFlowEntry/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowRcvrTable/sFlowEntry/sFlowRcvrIndex
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowRcvrTable/vtAdapterGroup/sFlowDataSource
  • /iso/identified-organization/dod/internet/private/enterprise/4300/sFlowMIB/sFlowAgent/sFlowRcvrTable/vtAdapterGroup/sFlowRcvrIndex
  • Additional combinations skipped.

SNMP properties

Value type
Integer32, OBJECT IDENTIFIER
Maximum access defined by MIB
not-accessible, read-only
Status in MIB
current

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — FS.COM official Documentation Hub native MIB packages

Value type
Integer32
Maximum access defined by MIB
not-accessible
Status in MIB
current
Allowed ranges
1–65535

Variant 2 — MIBdepot

Value type
OBJECT IDENTIFIER
Maximum access defined by MIB
read-only
Status in MIB
current

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In SFLOW-MIB, the row index sFlowDataSource is declared as OBJECT IDENTIFIER. The index is encoded as the number of subidentifiers in the OID, followed by those subidentifiers. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

Published row index variants: sFlowDataSource; sFlowRcvrIndex.

A query example is omitted because the source variants do not establish compatible read access.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

S5800-48F4S, S5800-48F4SR, S5800-48T4S, S5800-8TF12S, S5850-24S2Q, S5850-24T16B, S5850-24T16S, S5850-32S2Q, S5850-48S2Q4C, S5850-48S6Q, S5850-48T4Q, S5850-48XMG8C.

Show 1 more models

S8050-20Q4C.

A definition in a model's MIB package does not establish that the device implements it or permits access.

The displayed source records contain one distinct definition. Compare its source records.

sFlowRcvrIndex OBJECT-TYPE
              SYNTAX      Integer32 (1..65535)
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                "Index into sFlowReceiverTable."
              ::= { sFlowRcvrEntry 1 }

Meaning

Descriptions

3 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Identifies the source of the data for the sFlow sampler. The following data source types are currently defined: - ifIndex.<I> DataSources of this traditional form are called port-based. Ideally the sampling entity will perform sampling on all flows originating from or destined to the specified interface. However, if the switch architecture only permits input or output sampling then the sampling agent is permitted to only sample input flows input or output flows. Each packet must only be considered once for sampling, irrespective of the number of ports it will be forwarded to. Note: Port 0 is used to indicate that all ports on the device are represented by a single data source. - sFlowPacketSamplingRate applies to all ports on the device capable of packet sampling. - sFlowCounterSamplingInterval applies to all ports. - smonVlanDataSource.<V> A dataSource of this form refers to a Packet-based VLAN and is called a VLAN-based dataSource. <V> is the VLANID as defined by the IEEE 802.1Q standard. The value is between 1 and 4094 inclusive, and it represents an 802.1Q VLAN-ID with global scope within a given bridged domain. Sampling is performed on all packets received that are part of the specified VLAN (no matter which port they arrived on). Each packet will only be considered once for sampling, irrespective of the number of ports it will be forwarded to. - entPhysicalEntry.<N> A dataSource of this form refers to a physical entity within the agent (e.g., entPhysicalClass = backplane(4)) and is called an entity-based dataSource. Sampling is performed on all packets entering the resource (e.g. If the backplane is being sampled, all packets transmitted onto the backplane will be considered as single candidates for sampling irrespective of the number of ports they ultimately reach). Note: Since each DataSource operates independently, a packet that crosses multiple DataSources may generate multiple flow records.
Original text from OID Repository
sFlowDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the source of the data for the sFlow sampler.
The following data source types are currently defined:
- ifIndex.<I>
DataSources of this traditional form are called port-based.
Ideally the sampling entity will perform sampling on all flows originating from or destined to the specified interface. However, if the switch architecture only permits input or output sampling then the sampling agent is permitted to only sample input flows input or output flows. Each packet must only be considered once for sampling, irrespective of the number of ports it will be forwarded to.
Note: Port 0 is used to indicate that all ports on the device are represented by a single data source.
- sFlowPacketSamplingRate applies to all ports on the
device capable of packet sampling.
- sFlowCounterSamplingInterval applies to all ports.
- smonVlanDataSource.<V>
A dataSource of this form refers to a Packet-based VLAN and is called a VLAN-based dataSource. <V> is the VLANID as defined by the IEEE 802.1Q standard. The value is between 1 and 4094 inclusive, and it represents an 802.1Q VLAN-ID with global scope within a given bridged domain.
Sampling is performed on all packets received that are part of the specified VLAN (no matter which port they arrived on).
Each packet will only be considered once for sampling, irrespective of the number of ports it will be forwarded to.
- entPhysicalEntry.<N>
A dataSource of this form refers to a physical entity within the agent (e.g., entPhysicalClass = backplane(4)) and is called an entity-based dataSource.
Sampling is performed on all packets entering the resource (e.g. If the backplane is being sampled, all packets transmitted onto the backplane will be considered as single candidates for sampling irrespective of the number of ports they ultimately reach).
Note: Since each DataSource operates independently, a packet that crosses multiple DataSources may generate multiple
flow records."
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from IETF RFC 3176.

Description 2

Identifies the source of the data for the sFlow sampler. The following data source types are currently defined: - ifIndex.<I> DataSources of this traditional form are called 'port-based'. Ideally the sampling entity will perform sampling on all flows originating from or destined to the specified interface. However, if the switch architecture only permits input or output sampling then the sampling agent is permitted to only sample input flows input or output flows. Each packet must only be considered once for sampling, irrespective of the number of ports it will be forwarded to. Note: Port 0 is used to indicate that all ports on the device are represented by a single data source. - sFlowPacketSamplingRate applies to all ports on the device capable of packet sampling. - sFlowCounterSamplingInterval applies to all ports. - smonVlanDataSource.<V> A dataSource of this form refers to a 'Packet-based VLAN' and is called a 'VLAN-based' dataSource. <V> is the VLAN ID as defined by the IEEE 802.1Q standard. The value is between 1 and 4094 inclusive, and it represents an 802.1Q VLAN-ID with global scope within a given bridged domain. Sampling is performed on all packets received that are part of the specified VLAN (no matter which port they arrived on). Each packet will only be considered once for sampling, irrespective of the number of ports it will be forwarded to. - entPhysicalEntry.<N> A dataSource of this form refers to a physical entity within the agent (e.g., entPhysicalClass = backplane(4)) and is called an 'entity-based' dataSource. Sampling is performed on all packets entering the resource (e.g. If the backplane is being sampled, all packets transmitted onto the backplane will be considered as single candidates for sampling irrespective of the number of ports they ultimately reach). Note: Since each DataSource operates independently, a packet that crosses multiple DataSources may generate multiple flow records.
Sources for this description

Description 3

Index into sFlowReceiverTable.

Sources for this description

FS.COM official Documentation Hub native MIB packages

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 3FS.COM official Documentation Hub native MIB packages1 record · 1 source

Description 3

sFlowRcvrIndex · currentFS.COM official Documentation Hub native MIB packages1 source

Status in source: current.

Names: sFlowRcvrIndex

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "sFlowRcvrIndex",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "1",
    ".",
    ".",
    "65535",
    ")",
    "MAX-ACCESS",
    "not-accessible",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Index into sFlowReceiverTable.\"",
    "::=",
    "{",
    "sFlowRcvrEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            1,
            65535
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Index into sFlowReceiverTable."
    ],
    null,
    null,
    null,
    null
  ]
}

Historical records

Additional source information

Information from MIBdepot
sFlowDataSource OBJECT-TYPE
     SYNTAX      OBJECT IDENTIFIER
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "Identifies the source of the data for the sFlow sampler.
       The following data source types are currently defined:

       - ifIndex.<I>
       DataSources of this traditional form are called 'port-based'.
       Ideally the sampling entity will perform sampling on all flows
       originating from or destined to the specified interface.
       However, if the switch architecture only permits input or
       output sampling then the sampling agent is permitted to only
       sample input flows input or output flows.  Each packet must
       only be considered once for sampling, irrespective of the
       number of ports it will be forwarded to.

       Note: Port 0 is used to indicate that all ports on the device
             are represented by a single data source.
             - sFlowPacketSamplingRate applies to all ports on the
               device capable of packet sampling.
             - sFlowCounterSamplingInterval applies to all ports.

       - smonVlanDataSource.<V>
       A dataSource of this form refers to a 'Packet-based VLAN'
       and is called a 'VLAN-based' dataSource.  <V> is the VLAN
       ID as defined by the IEEE 802.1Q standard.  The
       value is between 1 and 4094 inclusive, and it represents
       an 802.1Q VLAN-ID with global scope within a given
       bridged domain.
       Sampling is performed on all packets received that are part
       of the specified VLAN (no matter which port they arrived on).
       Each packet will only be considered once for sampling,
       irrespective of the number of ports it will be forwarded to.

       - entPhysicalEntry.<N>
       A dataSource of this form refers to a physical entity within
       the agent (e.g., entPhysicalClass = backplane(4)) and is called
       an 'entity-based' dataSource.
       Sampling is performed on all packets entering the resource (e.g.
       If the backplane is being sampled, all packets transmitted onto
       the backplane will be considered as single candidates for
       sampling irrespective of the number of ports they ultimately
       reach).

       Note: Since each DataSource operates independently, a packet
             that crosses multiple DataSources may generate multiple
             flow records."
     ::= { sFlowEntry 1 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.4300)

Phaal Peter

Siblings (10)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.4300.1.1.4.1.2 sFlowOwner, sFlowRcvrOwner00 The entity making use of this sFlow sampler. The empty string
indicates that the sFlow sampler is currently unclaimed.
An entity…
1.3.6.1.4.1.4300.1.1.4.1.3 sFlowTimeout, sFlowRcvrTimeout00 The time (in seconds) remaining before the sampler is released
and stops sampling. When set, the owner establishes control
for t…
1.3.6.1.4.1.4300.1.1.4.1.4 sFlowPacketSamplingRate, sFlowRcvrMaximumDatagramSize00 The statistical sampling rate for packet sampling from this
source.

Set to N to sample 1/Nth of the packets in the monitored flow…
1.3.6.1.4.1.4300.1.1.4.1.5 sFlowCounterSamplingInterval, sFlowRcvrAddressType00 The maximum number of seconds between successive samples of the
counters associated with this data source. A sampling interval
o…
1.3.6.1.4.1.4300.1.1.4.1.6 sFlowMaximumHeaderSize, sFlowRcvrAddress00 The maximum number of bytes that should be copied from a
sampled packet. The agent may have an internal maximum and
minimum perm…
1.3.6.1.4.1.4300.1.1.4.1.7 sFlowMaximumDatagramSize, sFlowRcvrPort00 The maximum number of data bytes that can be sent in a single
sample datagram. The manager should set this value to avoid
fragme…
1.3.6.1.4.1.4300.1.1.4.1.8 sFlowCollectorAddressType, sFlowRcvrDatagramVersion00 The type of sFlowCollectorAddress.
1.3.6.1.4.1.4300.1.1.4.1.9 sFlowCollectorAddress00 The IP address of the sFlow collector.
If set to 0.0.0.0 all sampling is disabled.
1.3.6.1.4.1.4300.1.1.4.1.10 sFlowCollectorPort00 The destination port for sFlow datagrams.
1.3.6.1.4.1.4300.1.1.4.1.11 sFlowDatagramVersion00 The version of sFlow datagrams that should be sent.

When set to a value not support by the agent, the agent should
adjust the val…