The status of this conceptual row.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptable to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Setting this object to destroy(6) will remove the corresponding
entry in this table.
The following values may be read:
active(1).
Parsed from file qbsystem.mib.txt
Company: None
Module: QBSYS-SYSTEM-MIB
The status of this conceptual row.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptable to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Setting this object to destroy(6) will remove the corresponding
entry in this table.
The following values may be read:
active(1).
Parsed from file QBSYS-SYSTEM-MIB.mib
Module: QBSYS-SYSTEM-MIB
Vendor: Quantum Bridge
Module: QBSYS-SYSTEM-MIB
[Automatically extracted from oidview.com]
qbSysIotRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. This OBJECT can be set to: createAndGo(4) destroy(6) Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to destroy(6) will remove the corresponding entry in this table. The following values may be read: active(1)." ::= { qbSysIotEntry 13 }
qbSysIotRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. This OBJECT can be set to: createAndGo(4) destroy(6) Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to destroy(6) will remove the corresponding entry in this table. The following values may be read: active(1)." ::= { qbSysIotEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.1 | qbSysIotSerialNumber | 0 | 0 | The IOT serial number. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.2 | qbSysIoasDwsIfIndex | 0 | 0 | The IOT's DWS interface index. Indicates the interface index of the IOAS DWS interface to which this IOT is attached. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.3 | qbSysIotAddr | 0 | 0 | A Quantum Bridge identifier for the IOT device. This value can be changed if the IOAS is reset. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.4 | qbSysIotDescr | 0 | 0 | A textual description of the IOT. This value includes the full name and version identification of the system's hardware type, so… |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.5 | qbSysIotName | 0 | 0 | An administratively-assigned name for this IOT. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.6 | qbSysIotLocation | 0 | 0 | The physical location of the IOT. Note that, currently, this object readonly |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.7 | qbSysIotSwVersion | 0 | 0 | When in the same set pdu as qbSysIotAdminStatus, this object indicates the version of software that the IOT will boot from if qb… |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.8 | qbSysIotHwVersion | 0 | 0 | The hardware version of the module. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.9 | qbSysIotAdminStatus | 0 | 0 | This object, when read, returns one of the following results: enable(5): IOT is currently operational disable(6): IOT is currently… |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.10 | qbSysIotOperStatus | 0 | 0 | This is the operational IOT status. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.11 | qbSysIotDsx1LineCoding | 0 | 0 | This variable mirrors the dsx1LineCoding object defined in the RFC2495. When the object is set to a new value it effects all 4 DS… |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.12 | qbSysIotSerialStr | 0 | 0 | This string has the following format for old IOTs(YYWK-PC-XXXXXX) where yy - year, wk - week of the year, and xxxxxx - serial num… |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.14 | qbSysIotManufSerialNum | 0 | 0 | The IOT manufecturing serial number string. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.15 | qbSysIotType | 0 | 0 | The IOT type. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.16 | qbSysIotProductName | 0 | 0 | An product name for this IOT. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.17 | qbSysIotSignalFmt | 0 | 0 | The IOT signal format type. |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.18 | qbSysIotRollSerialNumber | 0 | 0 | This object when reads, returns the serial number of the selected IOT(the same as qbSysIotSerialNumber). When the object is set (… |
| 1.3.6.1.4.1.4323.2.2.1.6.9.1.19 | qbSysIotNumSlots | 0 | 0 | The number of slots in the IOT chassis available for plug-in modules. QB616 contains 3 slots, all other IOT return 0 |